## Summary of the Pull Request
Adjusts DirectX renderer to use `til::bitmap` to track invalidation
regions. Uses special modification to invalidate a row-at-a-time to
ensure ligatures and NxM glyphs continue to work.
## References
Likely helps #1064
## PR Checklist
* [x] Closes#778
* [x] I work here.
* [x] Manual testing performed. See Performance traces in #778.
* [x] Automated tests for `til` changes.
* [x] Am core contributor. And discussed with @DHowett-MSFT.
## Detailed Description of the Pull Request / Additional comments
- Applies `til::bitmap` as the new invalidation scheme inside the
DirectX renderer and updates all entrypoints for collecting
invalidation data to coalesce into this structure.
- Semi-permanently routes all invalidations through a helper method
`_InvalidateRectangle` that will expand any invalidation to cover the
entire line. This ensures that ligatures and NxM glyphs will continue
to render appropriately while still allowing us to dramatically reduce
the number of lines drawn overall. In the future, we may come up with
a tighter solution than line-by-line invalidation and can modify this
helper method appropriately at that later date to further scope the
invalid region.
- Ensures that the `experimental.retroTerminalEffects` feature continues
to invalidate the entire display on start of frame as the shader is
applied at the end of the frame composition and will stack on itself
in an amusing fashion when we only redraw part of the display.
- Moves many member variables inside the DirectX renderer into the new
`til::size`, `til::point`, and `til::rectangle` methods to facilitate
easier management and mathematical operations. Consequently adds
`try/catch` blocks around many of the already-existing `noexcept`
methods to deal with mathematical or casting failures now detected by
using the support classes.
- Corrects `TerminalCore` redraw triggers to appropriately communicate
scrolling circumstances to the renderer so it can optimize the draw
regions appropriately.
- Fixes an issue in the base `Renderer` that was causing overlapping
scroll regions due to behavior of `Viewport::TrimToViewport` modifying
the local. This fix is "good enough" for now and should go away when
`Viewport` is fully migrated to `til::rectangle`.
- Adds multiplication and division operators to `til::rectangle` and
supporting tests. These operates will help scale back and forth
between a cell-based rectangle and a pixel-based rectangle. They take
special care to ensure that a pixel rectangle being divided downward
back to cells will expand (with the ceiling division methods) to cover
a full cell when even one pixel inside the cell is touched (as is how
a redraw would have to occur).
- Blocks off trace logging of invalid regions if no one is listening to
optimize performance.
- Restores full usage of `IDXGISwapChain1::Present1` to accurately and
fully communicate dirty and scroll regions to the underlying DirectX
framework. This additional information allows the framework to
optimize drawing between frames by eliminating data transfer of
regions that aren't modified and shuffling frames in place. See
[Remarks](https://docs.microsoft.com/en-us/windows/win32/api/dxgi1_2/nf-dxgi1_2-idxgiswapchain1-present1#remarks)
for more details.
- Updates `til::bitmap` set methods to use more optimized versions of
the setters on the `dynamic_bitset<>` that can bulk fill bits as the
existing algorithm was noticeably slow after applying the
"expand-to-row" helper to the DirectX renderer invalidation.
- All `til` import hierarchy is now handled in the parent `til.h` file
and not in the child files to prevent circular imports from happening.
We don't expect the import of any individual library file, only the
base one. So this should be OK for now.
## Validation Steps Performed
- Ran `cmatrix`, `cmatrix -u0`, and `cacafire` after changes were made.
- Made a bunch of ligatures with `Cascadia Code` in the Terminal
before/after the changes and confirmed they still ligate.
- Ran `dir` in Powershell and fixed the scrolling issues
- Clicked all over the place and dragged to make sure selection works.
- Checked retro terminal effect manually with Powershell.
My basic idea was that `WM_CHAR` is just the better `WM_KEYDOWN`.
The latter fails to properly support common dead key sequences like in
#3516.
As such I added some logic to `Terminal::SendKeyEvent` to make it return
false if the pressed key represents a printable character.
This causes us to receive a character event with a (hopefully) correctly
composed code unit, which then gets sent to `Terminal::SendCharEvent`.
`Terminal::SendCharEvent` in turn had to be modified to support
potentially pressed modifier keys, since `Terminal::SendKeyEvent` isn't
doing that for us anymore.
Lastly `TerminalInput` had to be modified heavily to support character
events with modifier key states. In order to do so I merged its
`HandleKey` and `HandleChar` methods into a single one, that now handles
both cases.
Since key events will now contain character data and character events
key codes the decision logic in `TerminalInput::HandleKey` had to be
rewritten.
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
* [x] I've discussed this with core contributors already.
## Validation Steps Performed
* See #3516.
* I don't have any keyboard that generates surrogate characters. Due to
this I modified `TermControl::_SendPastedTextToConnection` to send the
data to `_terminal->SendCharEvent()` instead. I then pasted the test
string ""𐐌𐐜𐐬" and ensured that the new `TerminalInput::_SendChar`
method still correctly assembles surrogate pairs.
Closes#3516Closes#3554 (obsoleted by this PR)
Potentially impacts #391, which sounds like a duplicate of #3516
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR will allow TSFInputControl to redraw its Canvas and TextBlock in response to when the Terminal cursor position updates. This will fix the issue where during Korean composition, the first symbol of the next composition will appear on top of the previous composed character. Since the Terminal Cursor updates a lot, I've added some checks to see if the TSFInputControl really needs to redraw. This will also decrease the number of actual redraws since we receive a bunch of `LayoutRequested` events when there's no difference between them.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4963
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Startup, teardown, CJK IME gibberish testing, making sure the IME block shows up in the right place.
This commit rewrites selection handling at the TermControl layer.
Previously, we were keeping track of a number of redundant variables
that were easy to get out of sync.
The new selection model is as follows:
* A single left click will always begin a _pending_ selection operation
* A single left click will always clear a selection (#4477)
* A double left click will always begin a word selection
* A triple left click will always begin a line selection
* A selection will only truly start when the cursor moves a quarter of
the smallest dimension of a cell (usually its width) in any direction
_This eliminates the selection of a single cell on one click._
(#4282, #5082)
* We now keep track of whether the selection has been "copied", or
"updated" since it was last copied. If an endpoint moves, it is
updated. For copy-on-select, it is only copied if it's updated.
(#4740)
Because of this, we can stop tracking the position of the focus-raising
click, and whether it was part of click-drag operation. All clicks can
_become_ part of a click-drag operation if the user drags.
We can also eliminate the special handling of single cell selection at
the TerminalCore layer: since TermControl determines when to begin a
selection, TerminalCore no longer needs to know whether copy on select
is enabled _or_ whether the user has started and then backtracked over a
single cell. This is now implicit in TermControl.
Fixes#5082; Fixes#4477
This commit introduces a github action to check our spelling and fixes
the following misspelled words so that we come up green.
It also renames TfEditSes to TfEditSession, because Ses is not a word.
currently, excerpt, fallthrough, identified, occurred, propagate,
provided, rendered, resetting, separate, succeeded, successfully,
terminal, transferred, adheres, breaks, combining, preceded,
architecture, populated, previous, setter, visible, window, within,
appxmanifest, hyphen, control, offset, powerpoint, suppress, parsing,
prioritized, aforementioned, check in, build, filling, indices, layout,
mapping, trying, scroll, terabyte, vetoes, viewport, whose
## Summary of the Pull Request
Seriously just read the code on this one, it's so incredibly obvious what I did wrong
## References
Regressed with #4741
## PR Checklist
* [x] Closes#5029
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
This is 100% on me. Even after mucking around in this function for the last 3
months, I missed that there was a single addition where we weren't doing a
clamped addition. This would lead to us creating a buffer with negative height,
and all sorts of badness.
Clamping this addition was enough to fix the bug.
## PR Checklist
* [x] Closes#2815
* [x] Closes#4972
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* Created a profile with `"historySize" : 32728`, then filled the viewport with
text, then maximized, and saw that the viewport indeed did resize to the new
size of the window.
## Summary of the Pull Request
Currently, when the user resizes the Terminal, we'll snap the visible viewport back to the bottom of the buffer. This PR changes the visible viewport of the Terminal to instead remain in the same relative location it was before the resize.
## References
Made possible by our sponsors at #4741, and listeners like you.
## PR Checklist
* [x] Closes#3494
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We already hated the `std::optional<short>&` thing I yeet'd into #4741 right at the end to replace a `short*`. So I was already going to change that to a `std::optional<std::reference_wrapper<short>>`, which is more idomatic. But then I was looking through the list of bugs and #3494 caught my eye. I realized it would be trivial to not only track the top of the `mutableViewport` during a resize, but we could use the same code path to track the _visible_ viewport's start as well.
So basically I'm re-using that bit of code in `Reflow` to calculate the visible viewport's position too.
## Validation Steps Performed
Gotta love just resizing things all day, errday
Adds support for setting the cursor visibility in Terminal. Visibility
is a property entirely independent from whether the cursor is "on" or
not. The cursor blinker _should_ change the "IsOn" property. It was
actually changing the "Visible" property, which was incorrect. This PR
additionally corrects the naming of the method used by the cursor
blinker, and makes it do the right thing.
I added a pair of tests, one taken straight from conhost. In
copy-pasting that test, I took it a step further and implemented
`^[[?12h`, `^[[?12l`, which enables/disables cursor blinking, for the
`TerminalCore`. THIS DOES NOT ADD SUPPORT FOR DISABLING BLINKING IN THE
APP. Conpty doesn't emit the blinking on/off sequences quite yet, but
when it _does_, the Terminal will be ready.
## References
* I'd bet this conflicts with #2892
* This isn't a solution for #1379
* There shockingly isn't an issue for cursor blink state via conpty...?
## PR Checklist
* [x] Closes#3093
* [x] Closes#3499
* [x] Closes#4644
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Make TerminalControl synthesize mouse events and Terminal send them to
the TerminalInput's MouseInput module.
The implementation here takes significant inspiration from how we handle
KeyEvents.
## References
Closes#545 - VT Mouse Mode (Terminal)
References #376 - VT Mouse Mode (ConPty)
### TerminalControl
- `_TrySendMouseEvent` attempts to send a mouse event via TermInput.
Similar to `_TrySendKeyEvent`
- Use the above function to try and send the mouse event _before_
deciding to modify the selection
### TerminalApi
- Hookup (re)setting the various modes to handle VT Input
- Terminal is _always_ in VT Input mode (important for #4856)
### TerminalDispatch
- Hookup (re)setting the various modes to handle VT Input
### TerminalInput
- Convert the mouse input position from viewport position to buffer
position
- Then send it over to the MouseInput in TerminalInput to actually do it
(#4848)
## Validation Steps Performed
Tests should still pass.
This PR adds support for "Resize with Reflow" to the Terminal. In
conhost, `ResizeWithReflow` is the function that's responsible for
reflowing wrapped lines of text as the buffer gets resized. Now that
#4415 has merged, we can also implement this in the Terminal. Now, when
the Terminal is resized, it will reflow the lines of it's buffer in the
same way that conhost does. This means, the terminal will no longer chop
off the ends of lines as the buffer is too small to represent them.
As a happy side effect of this PR, it also fixed#3490. This was a bug
that plagued me during the investigation into this functionality. The
original #3490 PR, #4354, tried to fix this bug with some heavy conpty
changes. Turns out, that only made things worse, and far more
complicated. When I really got to thinking about it, I realized "conhost
can handle this right, why can't the Terminal?". Turns out, by adding
resize with reflow, I was also able to fix this at the same time.
Conhost does a little bit of math after reflowing to attempt to keep the
viewport in the same relative place after a reflow. By re-using that
logic in the Terminal, I was able to fix#3490.
I also included that big ole test from #3490, because everyone likes
adding 60 test cases in a PR.
## References
* #4200 - this scenario
* #405/#4415 - conpty emits wrapped lines, which was needed for this PR
* #4403 - delayed EOL wrapping via conpty, which was also needed for
this
* #4354 - we don't speak of this PR anymore
## PR Checklist
* [x] Closes#1465
* [x] Closes#3490
* [x] Closes#4771
* [x] Tests added/passed
## EDIT: Changes to this PR on 5 March 2020
I learned more since my original version of this PR. I wrote that in
January, and despite my notes that say it was totally working, it
_really_ wasn't.
Part of the hard problem, as mentioned in #3490, is that the Terminal
might request a resize to (W, H-1), and while conpty is preparing that
frame, or before the terminal has received that frame, the Terminal
resizes to (W, H-2). Now, there aren't enough lines in the terminal
buffer to catch all the lines that conpty is about to emit. When that
happens, lines get duplicated in the buffer. From a UX perspective, this
certainly looks a lot worse than a couple lost lines. It looks like
utter chaos.
So I've introduced a new mode to conpty to try and counteract this
behavior. This behavior I'm calling "quirky resize". The **TL;DR** of
quirky resize mode is that conpty won't emit the entire buffer on a
resize, and will trust that the terminal is prepared to reflow it's
buffer on it's own.
This will enable the quirky resize behavior for applications that are
prepared for it. The "quirky resize" is "don't `InvalidateAll` when the
terminal resizes". This is added as a quirk as to not regress other
terminal applications that aren't prepared for this behavior
(gnome-terminal, conhost in particular). For those kinds of terminals,
when the buffer is resized, it's just going to lose lines. That's what
currently happens for them.
When the quirk is enabled, conpty won't repaint the entire buffer. This
gets around the "duplicated lines" issue that requesting multiple
resizes in a row can cause. However, for these terminals that are
unprepared, the conpty cursor might end up in the wrong position after a
quirky resize.
The case in point is maximizing the terminal. For maximizing
(height->50) from a buffer that's 30 lines tall, with the cursor on
y=30, this is what happens:
* With the quirk disabled, conpty reprints the entire buffer. This is
60 lines that get printed. This ends up blowing away about 20 lines
of scrollback history, as the terminal app would have tried to keep
the text pinned to the bottom of the window. The term. app moved the
viewport up 20 lines, and then the 50 lines of conpty output (30
lines of text, and 20 blank lines at the bottom) overwrote the lines
from the scrollback. This is bad, but not immediately obvious, and
is **what currently happens**.
* With the quirk enabled, conpty doesn't emit any lines, but the
actual content of the window is still only in the top 30 lines.
However, the terminal app has still moved 20 lines down from the
scrollback back into the viewport. So the terminal's cursor is at
y=50 now, but conpty's is at 30. This means that the terminal and
conpty are out of sync, and there's not a good way of re-syncing
these. It's very possible (trivial in `powershell`) that the new
output will jump up to y=30 override the existing output in the
terminal buffer.
The Windows Terminal is already prepared for this quirky behavior, so it
doesn't keep the output at the bottom of the window. It shifts it's
viewport down to match what conpty things the buffer looks like.
What happens when we have passthrough mode and WT is like "I would like
quirky resize"? I guess things will just work fine, cause there won't be
a buffer behind the passthrough app that the terminal cares about. Sure,
in the passthrough case the Terminal could _not_ quirky resize, but the
quirky resize won't be wrong.
- When performing chunk selection, the expansion now occurs at the time
of the selection, not the rendering of the selection
- `GetSelectionRects()` was moved to the `TextBuffer` and is now shared
between ConHost and Windows Terminal
- Some of the selection variables were renamed for clarity
- Selection COORDs are now in the Text Buffer coordinate space
- Fixes an issue with Shift+Click after performing a Multi-Click
Selection
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection
anchors are an accurate representation of what is selected. We just need
to move `GetText` to the `TextBuffer`. Then we can have those three
issues just rely on code from the text buffer. This also means ConHost
gets some of this stuff for free 😀
### TextBuffer
- `GetTextRects` is the abstracted form of `GetSelectionRects`
- `_ExpandTextRow` is still needed to handle wide glyphs properly
### Terminal
- Rename...
- `_boxSelection` --> `_blockSelection` for consistency with ConHost
- `_selectionAnchor` --> `_selectionStart` for consistency with UIA
- `_endSelectionPosition` --> `_selectionEnd` for consistency with
UIA
- Selection anchors are in Text Buffer coordinates now
- Really rely on `SetSelectionEnd` to accomplish appropriate chunk
selection and shift+click actions
## Validation Steps Performed
- Shift+Click
- Multi-Click --> Shift+Click
- Chunk Selection at...
- top of buffer
- bottom of buffer
- random region in scrollback
Closes#4465Closes#4547
## Summary of the Pull Request
Changes how conpty emits text to preserve line-wrap state, and additionally adds rudimentary support to the Windows Terminal for wrapped lines.
## References
* Does _not_ fix (!) #3088, but that might be lower down in conhost. This makes wt behave like conhost, so at least there's that
* Still needs a proper deferred EOL wrap implementation in #780, which is left as a todo
* #4200 is the mega bucket with all this work
* MSFT:16485846 was the first attempt at this task, which caused the regression MSFT:18123777 so we backed it out.
* #4403 - I made sure this worked with that PR before I even sent #4403
## PR Checklist
* [x] Closes#405
* [x] Closes#3367
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I started with the following implementation:
When conpty is about to write the last column, note that we wrapped this line here. If the next character the vt renderer is told to paint get is supposed to be at the start of the following line, then we know that the previous line had wrapped, so we _won't_ emit the usual `\r\n` here, and we'll just continue emitting text.
However, this isn't _exactly_ right - if someone fills the row _exactly_ with text, the information that's available to the vt renderer isn't enough to know for sure if this line broke or not. It is possible for the client to write a full line of text, with a `\n` at the end, to manually break the line. So, I had to also add the `lineWrapped` param to the `IRenderEngine` interface, which is about half the files in this changelist.
## Validation Steps Performed
* Ran tests
* Checked how the Windows Terminal behaves with these changes
* Made sure that conhost/inception and gnome-terminal both act as you'd expect with wrapped lines from conpty
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
## Summary of the Pull Request
This PR removes all of the VT-specific functionality from the `WriteCharsLegacy` function that dealt with control characters, since those controls are now handled in the state machine when in VT mode. It also removes most of the control character handling from the `Terminal::_WriteBuffer` method for the same reason.
## References
This is a followup to PR #4171
## PR Checklist
* [x] Closes#3971
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: https://github.com/microsoft/terminal/issues/780#issuecomment-570287435
## Detailed Description of the Pull Request / Additional comments
There are four changes to the `WriteCharsLegacy` implementation:
1. The `TAB` character had special case handling in VT mode which is now no longer required. This fixes a bug in the Python REPL editor (when run from a cmd shell in Windows Terminal), which would prevent you tabbing past the end of the line. It also fixes#3971.
2. Following on from point 1, the `WC_NONDESTRUCTIVE_TAB` flag could also now be removed. It only ever applied in VT mode, in which case the `TAB` character isn't handled in `WriteCharsLegacy`, so there isn't a need for a non-destructive version.
3. There used to be special case handling for a `BS` character at the beginning of the line when in VT mode, and that is also no longer required. This fixes an edge-case bug which would prevent a glyph being output for code point 8 when `ENABLE_PROCESSED_OUTPUT` was disabled.
4. There was quite a lot of special case handling for control characters in the "end-of-line wrap" implementation, which is no longer required. This fixes a bug which would prevent "low ASCII" characters from wrapping when output at the end of a line.
Then in the `Terminal::_WriteBuffer` implementation, I've simply removed all control character handling, except for `LF`. The Terminal is always in VT mode, so the control characters are always handled by the state machine. The exception for the `LF` character is simply because it doesn't have a proper implementation yet, so it still passes the character through to `_WriteBuffer`. That will get cleaned up eventually, but I thought that could wait for a later PR.
Finally, with the removal of the VT mode handling in `WriteCharsLegacy`, there was no longer a need for the `SCREEN_INFORMATION::InVTMode` method to be publicly accessible. That has now been made private.
## Validation Steps Performed
I've only tested manually, making sure the conhost and Windows Terminal still basically work, and confirming that the above-mentioned bugs are fixed by these changes.
## Summary of the Pull Request
See [my code comment](https://github.com/microsoft/terminal/pull/4150#discussion_r364392640) below for technical details of the issue that caused #4145.
## PR Checklist
* [x] Closes#1360, Closes#4145.
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
TBH I kinda hope this project could migrate to an internal use of UTF-8 in the future. 😶
## Validation Steps Performed
Followed the "Steps to reproduce" in #4145 and ensured the "Expected behavior" happens.
## Summary of the Pull Request
- Enables auditing of some Terminal libraries (Connection, Core, Settings)
- Also audit WinConPTY.LIB since Connection depends on it
## PR Checklist
* [x] Rolls audit out to more things
* [x] I work here
* [x] Tests should still pass
* [x] Am core contributor
## Detailed Description of the Pull Request / Additional comments
This is turning on the auditing of these projects (as enabled by the heavier lifting in the other refactor) and then cleaning up the remaining warnings.
## Validation Steps Performed
- [x] Built it
- [x] Ran the tests
## Summary of the Pull Request
Refactors parsing/adapting libraries and consumers to use safer and/or more consistent mechanisms for passing information.
## PR Checklist
* [x] I work here
* [x] Tests still pass
* [x] Am a core contributor.
## Detailed Description of the Pull Request / Additional comments
This is in support of hopefully turning audit mode on to more projects. If I turned it on, it would immediately complain about certain classes of issues like pointer and size, pointer math, etc. The changes in this refactoring will eliminate those off the top.
Additionally, this has caught a bunch of comments all over the VT classes that weren't updated to match the parameters lists.
Additionally, this has caught a handful of member variables on classes that were completely unused (and now gone).
Additionally, I'm killing almost all hungarian and shortening variable names. I'm only really leaving 'p' for pointers.
Additionally, this is vaguely in support of a future where we can have "infinite scrollback" in that I'm moving things to size_t across the board. I know it's a bit of a memory cost, but all the casting and moving between types is error prone and unfun to save a couple bytes.
## Validation Steps Performed
- [x] build it
- [x] run all the tests
- [x] everyone looked real hard at it
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
This is the PR for feature Search: #605
This PR includes the newly introduced SearchBoxControl in TermControl dir, which is the search bar for the search experience. And the codes that enable Search in Windows Terminal.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
The PR that migrates the Conhost search module: https://github.com/microsoft/terminal/pull/3279
Spec (still actively updating): https://github.com/microsoft/terminal/pull/3299
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#605
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
These functionalities are included in the search experience.
1. Search in Terminal text buffer.
2. Automatic wrap-around.
3. Search up or down switch by clicking different buttons.
4. Search case sensitively/insensitively by clicking a button. S. Move the search box to the top/bottom by clicking a button.
6. Close by clicking 'X'.
7. Open search by ctrl + F.
When the searchbox is open, the user could still interact with the terminal by clicking the terminal input area.
While I already have the search functionalities, currently there are still some known to-do works and I will keep updating my PR:
1. Optimize the search box UI, this includes:
1) Theme adaptation. The search box background and font color
should change according to the theme,
2) Add background. Currently the elements in search box are all
transparent. However, we need a background.
3) Move button should be highlighted once clicked.
2. Accessibility: search process should be able to performed without mouse. Once the search box is focused, the user should be able to navigate between all interactive elements on the searchbox using keyboard.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
To test:
1. checkout this branch.
2. Build the project.
3. Start Windows Terminal and press Ctrl+F
4. The search box should appear on the top right corner.
* first take at suppressApplicationTitle rewrite
* Rebased tab title fixes
* updated settings doc
* incomplete - not suppressing where application title is changing
* added original startingTitle functionality back
* moved suppressApplicationTitle to ICoreSettings
* suppression is working, but tab navigation overrides it
* suppression works, but not with panes
* it works!
* code cleanup
* added suppressApplicationTitle to JSON schema
* more code cleanup
* changed starting title from wstring_view to wstring
* Formatting fix
## Summary of the Pull Request
This PR potentially fixes#3101.
## PR Checklist
* [x] Closes#3101.
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This PR fixes#3101 by setting flag 0 in `ToUnicodeEx()` even though the documentation says "If bit 0 is set, a menu is active.". I'm not 100% sure why it works, but it definitely does in this case.
I thought that bit 2, which claims that "keyboard state is not changed" would be sufficient to prevent this from happening, but it seems that's not the case.
I believe this PR should be verified by a developer at Microsoft who's familiar with the internal workings of `ToUnicodeEx()`.
We need this function (or something similar) to translate Alt+Key combinations to proper unicode.
But at the same time it should not send us any additional IBM-style Alt Codes to our character handler if that translation fails (and `ToUnicodeEx()` returns 0).
## Validation Steps Performed
See #3101 for more information. I ensured that Alt+Arrow-Key combinations do not print ◘☻♠♦ anymore.
This adds the WPF control to our project, courtesy of the Visual Studio team.
It re-hosts the Terminal Control components inside a reusable WPF adapter so it can be composed onto C# type surfaces like Visual Studio requires.
* Patch fix for #1360 until WriteStream (#780) can be implemented.
* Add a test that hangs in the broken state and passes in the success stat. Writes a bisecting character to the right most cell in the window.
* Code format! *shakes fist at sky*
* Update src/cascadia/TerminalCore/Terminal.cpp
This moves the detection of AltGr keypresses in front of the shortcut
handling. This allows one to have Ctrl+Alt shortcuts, while
simultaneously being able to use the AltGr key for special characters.
* Fixed a minor build warning
* Removed an unimplemented method declaration
* Added Microsoft::Terminal::Core::ControlKeyStates
// This class will act as a safe wrapper for the ControlKeyState enum,
// found in the NT console subsystem (<um/wincon.h>).
## Summary of the Pull Request
Currently, the program crashes with a window width or height greater than 32767 (accounting for window decorations). This can be caused when the `initialRows` and `initialColumns` settings are set too high (also depends on the font width and height). This fixes the issue by not allowing the window to expand beyond 32767x32767.
## References
#843 - relocated the ClampToShortMax helper for reuse elsewhere
* Support OSC to set default background and foreground colors
* Update the Terminal theme when the background changes
* Fix whitespace per code-review
* Add Documentation Comments
Also fix a few outdated comments and whitespace
* Update Telemetry codes per code review
* Add Unit Tests for OSC ForegroundColor and BackgroundColor
* Add a couple additional test cases
* Minor doc and whitespace change per PR review
* Update comment help per code review
* Add another OSC 10 & 11 test case, improve output
* Comments and syntax cleanup per code reviews
* fix for historySize=32767 hang (except for historySize=0 case); tests still in progress
* tests run and almost pass - failure is a real bug in my change
* fixed bug that caused tests to fail, but it seems another bug causes the app to crash with a zero row count
* fix the additional bug (at a higher layer) mentioned in previous commit description
* Fix chk build assertion failures in new tests
It seems C++/WinRT doesn't like it when you implement a Windows Runtime
interface but then create instances of the implementing class
with function-call lifetime (aka stack allocation). That makes sense
given that WinRT objects are COM objects, but in my defense I was following
this example where they are just fine instantiating the `App` object
on the stack:
https://docs.microsoft.com/en-us/windows/uwp/cpp-and-winrt-apis/author-apis#if-youre-not-authoring-a-runtime-class
* tabs to spaces
* CR feedback
* fix minor CR feedback (incorrect test log message)
