chore(TPS-4855): add patch note

tMicrosoftCrmInput

.gitignore

@@ -11,5 +11,4 @@ main/plugins/org.talend.designer.codegen/resources/sparkstreaming_header.javajet
 main/plugins/org.talend.designer.codegen/resources/sparkstreaming_subprocess_footer.javajet
 main/plugins/org.talend.designer.codegen/resources/sparkstreaming_subprocess_header.javajet
 main/plugins/org.talend.designer.codegen/resources/routelet.skeleton
-.DS_Store
-components.cache
+.DS_Store

CONTRIBUTORS.md

@@ -6,5 +6,4 @@ Huge thanks to these people who contributed in making Talend product better:
  - [mrizzato](https://github.com/mrizzato) (Massimiliano Rizzato)
  - [overpackaging](https://github.com/overpackaging) (Steeve Dreux)
  - [brazabr](https://github.com/brazabr) (Thiago Benvenuto)
- - [phoflack](https://jira.talendforge.org/secure/ViewProfile.jspa?name=phoflack) (Philip Hoflack)
- - [bgunics-talend](https://github.com/bgunics-talend) (Balasz Gunics)
+ - [phoflack](https://jira.talendforge.org/secure/ViewProfile.jspa?name=phoflack) (Philip Hoflack)

PATCH_RELEASE_NOTE.md

@@ -0,0 +1,63 @@
+---
+version: 7.3.1
+module: https://talend.poolparty.biz/coretaxonomy/42
+product:
+- https://talend.poolparty.biz/coretaxonomy/183
+---
+
+# TPS-4855
+
+| Info             | Value |
+| ---------------- | ---------------- |
+| Patch Name       | Patch\_20210622\_TPS-4855\_v1-7.3.1 |
+| Release date     | 2021-06-22 |
+| Target version   | 20200219\_1130-7.3.1 |
+| Product affected | Talend Studio |
+
+## Introduction
+This is a self-contained patch.
+
+
+**NOTE**: For information on how to obtain this patch, reach out to your Support contact at Talend.
+
+## Fixed issues
+
+This patch contains the following fixes:
+
+- [7.3.1] FCB 'EnableRegionalDisco' is disabled error when using tMicrosoftCrmInput (TDI-46297)
+
+## Prerequisites
+
+Consider the following requirements for your system:
+
+- Talend Studio 7.3.1 must be installed.
+
+- This patch is depend on monthly patch **R2020-12**. 
+
+## Installation
+
+**NOTE**: If the patch is deployed in the approach Installing the patch using Talend Studio, the folder configuration under this patch must be replaced manually.
+
+### Installing the patch using Software update
+
+1) Logon TAC and switch to Configuration->Software Update, then enter the correct values and save referring to the documentation: https://help.talend.com/reader/f7Em9WV_cPm2RRywucSN0Q/j9x5iXV~vyxMlUafnDejaQ
+
+2) Switch to Software update page, where the new patch will be listed. The patch can be downloaded from here into the nexus repository.
+
+3) On Studio Side: Logon Studio with remote mode, on the logon page the Update button is displayed: click this button to install the patch.
+
+### Installing the patch using Talend Studio
+
+1) Create a folder named "patches" under your studio installer directory and copy the patch .zip file to this folder.
+
+2) Restart your studio: a window pops up, then click OK to install the patch, or restart the commandline and the patch will be installed automatically.
+
+### Installing the patch using Commandline
+
+Execute the following commands:
+
+1. Talend-Studio-win-x86_64.exe -nosplash -application org.talend.commandline.CommandLine -consoleLog -data commandline-workspace startServer -p 8002 --talendDebug
+2. initRemote {tac_url} -ul {TAC login username} -up {TAC login password}
+3. checkAndUpdate -tu {TAC login username} -tup {TAC login password}
+
+

README.md

@@ -55,6 +55,6 @@ See the [CONTRIBUTORS.md](./CONTRIBUTORS.md) file for details.
 
 ## License
 
-Copyright (c) 2006-2021 Talend
+Copyright (c) 2006-2019 Talend
 
 Licensed under the Apache V2 License

i18n/plugins/org.talend.designer.abstractmap.nl/.classpath

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<classpath>
+	<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
+	<classpathentry kind="con" path="org.eclipse.pde.core.requiredPlugins"/>
+	<classpathentry kind="src" path="src/java/main"/>
+	<classpathentry kind="output" path="class"/>
+</classpath>

i18n/plugins/org.talend.designer.abstractmap.nl/.project

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>org.talend.designer.abstractmap.nl</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.jdt.core.javabuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.ManifestBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.SchemaBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.pde.PluginNature</nature>
+		<nature>org.eclipse.jdt.core.javanature</nature>
+	</natures>
+</projectDescription>

i18n/plugins/org.talend.designer.abstractmap.nl/META-INF/MANIFEST.MF

@@ -0,0 +1,6 @@
+Manifest-Version: 1.0
+Bundle-ManifestVersion: 2
+Bundle-Name: Nl Fragment
+Bundle-SymbolicName: org.talend.designer.abstractmap.nl
+Bundle-Version: 7.3.1.qualifier
+Fragment-Host: org.talend.designer.abstractmap

i18n/plugins/org.talend.designer.abstractmap.nl/build.properties

@@ -0,0 +1,4 @@
+source.. = src/java/main/
+output.. = class/
+bin.includes = META-INF/,\
+               .

i18n/plugins/org.talend.designer.abstractmap.nl/pom.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <parent>
+    <groupId>org.talend.studio</groupId>
+    <artifactId>tdi-studio-se</artifactId>
+    <version>7.3.1-PATCH</version>
+    <relativePath>../../../</relativePath>
+  </parent>
+  <artifactId>org.talend.designer.abstractmap.nl</artifactId>
+  <packaging>eclipse-plugin</packaging>
+</project>

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_el.properties

@@ -0,0 +1,6 @@
+prefs.configuration.LINK_STYLE.AUTO=\u0391\u03C5\u03C4\u03CC\u03BC\u03B1\u03C4\u03B1
+prefs.configuration.title=\u03A0\u03C1\u03BF\u03C4\u03B9\u03BC\u03AE\u03C3\u03B5\u03B9\u03C2 \u03C3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03CE\u03BD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD \u03C7\u03AC\u03C1\u03C4\u03B7 :
+prefs.configuration.LINK_STYLE.LINE=\u0393\u03C1\u03B1\u03BC\u03BC\u03AD\u03C2 (\u03B3\u03C1\u03AE\u03B3\u03BF\u03C1\u03B1)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u039A\u03B1\u03BC\u03C0\u03CD\u03BB\u03B5\u03C2
+prefs.configuration.LINK_STYLE=\u0395\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C0\u03C1\u03BF\u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03C9\u03BD \u03C7\u03B1\u03C1\u03C4\u03BF\u03B3\u03C1\u03B1\u03C6\u03B9\u03BA\u03CE\u03BD \u03C3\u03C5\u03BD\u03B4\u03AD\u03C3\u03BC\u03C9\u03BD \u03C9\u03C2:
+DraggingInfosPopup.draggingEntries=\u03A3\u03CD\u03C1\u03BF\u03BD\u03C4\u03B1\u03C2 {0} \u03BA\u03B1\u03C4\u03B1\u03C7\u03C9\u03C1\u03AE\u03C3\u03B5\u03B9\u03C2.

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_en.properties

@@ -0,0 +1,20 @@
+prefs.configuration.LINK_STYLE.AUTO=Auto
+prefs.configuration.title=Map components preferences :
+prefs.configuration.LINK_STYLE.LINE=Lines (fast)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=Curves
+prefs.configuration.LINK_STYLE=Default mapping links display as :
+DraggingInfosPopup.draggingEntry=Dragging {0} entry.
+DraggingInfosPopup.dropInvalid=\n<< Drop invalid >>\n
+DraggingInfosPopup.draggingEntries=Dragging {0} entries.
+DraggingInfosPopup.dropInvalidWithKey=\n<< Drop invalid >>\nPress both Shift and Ctrl keys to map one to one and overwrite
+DraggingInfosPopup.overwriteMode=\ > Overwrite mode
+DraggingInfosPopup.appendMode=\ > Append mode
+DraggingInfosPopup.appendModeToOverwrite=\ > Append mode (Ctrl key to overwrite)
+DraggingInfosPopup.insertAllSelectedEntries=\ > Insert all selected entries
+DraggingInfosPopup.insertRemainingEntries=\ > Insert remaining entries
+DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> Each source entry expression to each target expression
+DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> Each source entry to each target expression
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=> All source entries expression to a single one target expression (Shift key to change mapping)
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=> All source entries expression to a single one target expression
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=> All source entries to a single one target expression (Shift key to change mapping)
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=> All source entries to a single one target expression

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_fr.properties

@@ -0,0 +1,19 @@
+prefs.configuration.LINK_STYLE.AUTO=Auto
+prefs.configuration.title=Pr\u00E9f\u00E9rences des composants de mapping\:
+prefs.configuration.LINK_STYLE.LINE=Lignes (rapide)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=Courbes
+prefs.configuration.LINK_STYLE=Affichage par d\u00E9faut du lien de mapping \:
+DraggingInfosPopup.draggingEntry=Glissement de {0} entr\u00E9e.
+DraggingInfosPopup.dropInvalid=\n<< D\u00E9poser invalide >>\n
+DraggingInfosPopup.draggingEntries=Glissement de {0} entr\u00E9es.
+DraggingInfosPopup.overwriteMode=\ > Mode \u00E9crasement
+DraggingInfosPopup.appendMode=\ > Mode \u00E9crire apr\u00E8s
+DraggingInfosPopup.appendModeToOverwrite=> Mode \u00E9criture \u00E0 la suite (Ctrl pour \u00E9craser)
+DraggingInfosPopup.insertAllSelectedEntries=\ > Ins\u00E9rer toutes les entr\u00E9es s\u00E9lectionn\u00E9es
+DraggingInfosPopup.insertRemainingEntries=\ > Ins\u00E9rer les entr\u00E9es restantes
+DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> Chaque expression source vers chaque expression cible
+DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> Chaque expression source vers chaque expression cible
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=> Toutes les expressions source vers une seule expression cible (Maj pour modifier le mapping)
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=> Toutes les expressions source vers une seule expression cible
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=> Toutes les entr\u00E9es source vers une seule expression cible (Maj pour modifier le mapping)
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=> Toutes les entr\u00E9es source vers une seule expression cible

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_ja.properties

@@ -0,0 +1,20 @@
+prefs.configuration.LINK_STYLE.AUTO=\u81EA\u52D5
+prefs.configuration.title=\u30DE\u30C3\u30D7\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u57FA\u672C\u8A2D\u5B9A :
+prefs.configuration.LINK_STYLE.LINE=Lines (fast)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u66F2\u7DDA
+prefs.configuration.LINK_STYLE=\u30C7\u30D5\u30A9\u30EB\u30C8\u30DE\u30C3\u30D4\u30F3\u30B0\u30EA\u30F3\u30AF\u306E\u8868\u793A :
+DraggingInfosPopup.draggingEntry={0} \u30A8\u30F3\u30C8\u30EA\u3092\u30C9\u30E9\u30C3\u30B0\u3057\u3066\u3044\u307E\u3059\u3002
+DraggingInfosPopup.dropInvalid=\n<< \u7121\u52B9\u306A\u30C9\u30ED\u30C3\u30D7 >>\n
+DraggingInfosPopup.draggingEntries={0} \u30A8\u30F3\u30C8\u30EA\u3092\u30C9\u30E9\u30C3\u30B0
+DraggingInfosPopup.dropInvalidWithKey=\n<< \u7121\u52B9\u306A\u30C9\u30ED\u30C3\u30D7 >>\n\u4E00\u5BFE\u4E00\u3067\u30DE\u30C3\u30D4\u30F3\u30B0\u3057\u3001\u4E0A\u66F8\u304D\u3059\u308B\u5834\u5408\u306F\u3001Shift\u30AD\u30FC\u3068Ctrl\u30AD\u30FC\u3092\u540C\u6642\u306B\u62BC\u3057\u307E\u3059
+DraggingInfosPopup.overwriteMode=> \u4E0A\u66F8\u304D\u30E2\u30FC\u30C9
+DraggingInfosPopup.appendMode=> \u8FFD\u52A0\u30E2\u30FC\u30C9
+DraggingInfosPopup.appendModeToOverwrite=> \u8FFD\u52A0\u30E2\u30FC\u30C9(\u4E0A\u66F8\u304D\u3059\u308B\u306B\u306FCtrl\u30AD\u30FC)
+DraggingInfosPopup.insertAllSelectedEntries=> \u9078\u629E\u3057\u305F\u3059\u3079\u3066\u306E\u30A8\u30F3\u30C8\u30EA\u3092\u633F\u5165\u3057\u307E\u3059
+DraggingInfosPopup.insertRemainingEntries=> \u6B8B\u308A\u306E\u30A8\u30F3\u30C8\u30EA\u3092\u633F\u5165\u3057\u307E\u3059
+DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> \u5404\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u5404\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA\u5F0F
+DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> \u5404\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u5404\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=> 1\u3064\u306E\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u3059\u3079\u3066\u306E\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA\u5F0F (\u30DE\u30C3\u30D4\u30F3\u30B0\u3092\u5909\u66F4\u3059\u308B\u306B\u306FShift\u30AD\u30FC)
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=> 1\u3064\u306E\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u3059\u3079\u3066\u306E\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA\u5F0F
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=> 1\u3064\u306E\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u3059\u3079\u3066\u306E\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA (\u30DE\u30C3\u30D4\u30F3\u30B0\u3092\u5909\u66F4\u3059\u308B\u306B\u306FShift\u30AD\u30FC)
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=> 1\u3064\u306E\u30BF\u30FC\u30B2\u30C3\u30C8\u5F0F\u306B\u5BFE\u3059\u308B\u3059\u3079\u3066\u306E\u30BD\u30FC\u30B9\u30A8\u30F3\u30C8\u30EA

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_nl.properties

@@ -0,0 +1,3 @@
+prefs.configuration.LINK_STYLE.AUTO=Automatisch
+prefs.configuration.LINK_STYLE.LINE=Lijnen (snel)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=Rondingen

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_zh_CN.properties

@@ -0,0 +1,20 @@
+prefs.configuration.LINK_STYLE.AUTO=\u81EA\u52A8
+prefs.configuration.title=\u6620\u5C04\u7EC4\u4EF6\u9996\u9009\u9879:
+prefs.configuration.LINK_STYLE.LINE=\u76F4\u7EBF (\u5FEB)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u66F2\u7EBF
+prefs.configuration.LINK_STYLE=\u9ED8\u8BA4\u6620\u5C04\u8FDE\u63A5\u663E\u793A\u4E3A:
+DraggingInfosPopup.draggingEntry=\u62D6\u52A8 {0} \u6761\u76EE
+DraggingInfosPopup.dropInvalid=\\n<< \u65E0\u6548\u653E\u7F6E >>\\n
+DraggingInfosPopup.draggingEntries=\u62D6\u52A8 {0} \u4E2A\u6761\u76EE\u3002
+DraggingInfosPopup.dropInvalidWithKey=\\n<<\u65E0\u6548\u653E\u7F6E>>\\n\u6309\u4F4F Shift \u548C Ctrl \u952E\u4EE5\u8FDB\u884C\u4E00\u5BF9\u4E00\u6620\u5C04\u5E76\u6539\u5199
+DraggingInfosPopup.overwriteMode=\\ > \u6539\u5199\u6A21\u5F0F
+DraggingInfosPopup.appendMode=\\ > \u8FFD\u52A0\u6A21\u5F0F
+DraggingInfosPopup.appendModeToOverwrite=\\ > \u8FFD\u52A0\u6A21\u5F0F (Ctrl \u952E\u6765\u6539\u5199)
+DraggingInfosPopup.insertAllSelectedEntries=\\ > \u63D2\u5165\u6240\u6709\u9009\u5B9A\u6761\u76EE
+DraggingInfosPopup.insertRemainingEntries=\\ > \u63D2\u5165\u5269\u4F59\u6761\u76EE
+DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> \u6BCF\u4E2A\u6E90\u6761\u76EE\u8868\u8FBE\u5F0F\u5230\u6BCF\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
+DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> \u6BCF\u4E2A\u6E90\u6761\u76EE\u5230\u6BCF\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=\u6240\u6709\u6E90\u9879\u90FD\u8868\u793A\u4E3A\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F(Shift\u952E\u8F6C\u6362\u4E3A\u66F4\u6539\u6620\u5C04)
+DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=>\u6240\u6709\u6E90\u9879\u90FD\u8868\u793A\u4E3A\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=\u6240\u6709\u6E90\u9879\u5230\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F(Shift \u952E\u8F6C\u6362\u4E3A\u66F4\u6539\u6620\u5C04)
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=\u6240\u6709\u6E90\u9879\u5230\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F

i18n/plugins/org.talend.designer.alfrescooutput.nl/.classpath

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<classpath>
+	<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
+	<classpathentry kind="con" path="org.eclipse.pde.core.requiredPlugins"/>
+	<classpathentry kind="src" path="src/main/java"/>
+	<classpathentry kind="output" path="class"/>
+</classpath>

i18n/plugins/org.talend.designer.alfrescooutput.nl/.project

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>org.talend.designer.alfrescooutput.nl</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.jdt.core.javabuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.ManifestBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.SchemaBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.pde.PluginNature</nature>
+		<nature>org.eclipse.jdt.core.javanature</nature>
+	</natures>
+</projectDescription>

i18n/plugins/org.talend.designer.alfrescooutput.nl/META-INF/MANIFEST.MF

@@ -0,0 +1,6 @@
+Manifest-Version: 1.0
+Bundle-ManifestVersion: 2
+Bundle-Name: Nl Fragment
+Bundle-SymbolicName: org.talend.designer.alfrescooutput.nl
+Bundle-Version: 7.3.1.qualifier
+Fragment-Host: org.talend.designer.alfrescooutput

i18n/plugins/org.talend.designer.alfrescooutput.nl/build.properties

@@ -0,0 +1,4 @@
+source.. = src/main/java/
+output.. = class/
+bin.includes = META-INF/,\
+               .

i18n/plugins/org.talend.designer.alfrescooutput.nl/pom.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <parent>
+    <groupId>org.talend.studio</groupId>
+    <artifactId>tdi-studio-se</artifactId>
+    <version>7.3.1-PATCH</version>
+    <relativePath>../../../</relativePath>
+  </parent>
+  <artifactId>org.talend.designer.alfrescooutput.nl</artifactId>
+  <packaging>eclipse-plugin</packaging>
+</project>

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_ar.properties

@@ -0,0 +1,13 @@
+AlfrescoModelDialog.modelTable.title=\u0639\u0646\u0648\u0627\u0646
+AlfrescoModelDialog.availableAspects=\u0627\u0644\u062C\u0648\u0627\u0646\u0628 \u0627\u0644\u0645\u062A\u0627\u062D\u0629
+AlfrescoModelDialog.missingAspectDefinitions.title=\u062A\u0639\u0631\u064A\u0641\u0627\u062A \u0627\u0644\u062C\u0648\u0627\u0646\u0628 \u0645\u0641\u0642\u0648\u062F\u0629
+AlfrescoOutputManager.schemaError.title=\u062E\u0637\u0623 \u0641\u064A \u0627\u0644\u0645\u062E\u0637\u0637
+AlfrescoModelDialog.missingTypeDefinitions.title=\u0645\u0639\u0631\u0641\u0627\u062A \u0646\u0648\u0639 \u0645\u0641\u0642\u0648\u062F\u0629
+AlfrescoModelDialog.add=\u0625\u0636\u0627\u0641\u0629...
+AlfrescoModelDialog.aspects=\u0627\u0644\u062C\u0648\u0627\u0646\u0628
+AlfrescoOutputManager.schemaError.msg=\u064A\u0631\u062C\u0631\u0649 \u0645\u0632\u0627\u0645\u0646\u0629 \u0627\u0644\u062E\u0637\u0637 \u0623\u0648\u0644\u0627
+AlfrescoOutputModelManager.alreadyAdded=\u0647\u0630\u0627 \u0627\u0644\u0646\u0645\u0648\u0630\u062C \u0645\u0636\u0627\u0641 \u0645\u0633\u0628\u0642\u0627
+AlfrescoModelDialog.removeModelFailed=\u0641\u0634\u0644 \u0625\u0632\u0627\u0644\u0629 \u0646\u0645\u0648\u0630\u062C
+AlfrescoModelDialog.type=\u0646\u0648\u0639
+AlfrescoModelDialog.addModelFailed=\u0641\u0634\u0644 \u0625\u0636\u0627\u0641\u0629 \u0646\u0645\u0648\u0630\u062C
+AlfrescoModelDialog.modelTable.name=\u0627\u0644\u0627\u0633\u0645

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_el.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=\u039F\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03B1\u03BD\u03B1\u03C6\u03AD\u03C1\u03BF\u03BD\u03C4\u03B1\u03B9 \u03C3\u03B5 \u03AC\u03B3\u03BD\u03C9\u03C3\u03C4\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 Alfresco: ${0}.\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C0\u03B1\u03C1\u03AD\u03C7\u03B5\u03C4\u03B5 \u03C4\u03B1 \u03B1\u03C1\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 alfresco \u03C0\u03BF\u03C5 \u03C4\u03B9\u03C2 \u03BF\u03C1\u03AF\u03B6\u03BF\u03C5\u03BD.
+AlfrescoModelDialog.modelTable.title=\u03A4\u03AF\u03C4\u03BB\u03BF\u03C2
+AlfrescoModelDialog.availableAspects=\u0394\u03B9\u03B1\u03B8\u03AD\u03C3\u03B9\u03BC\u03B5\u03C2 \u03A0\u03C4\u03C5\u03C7\u03AD\u03C2
+AlfrescoModelDialog.missingAspectDefinitions.title=\u03A7\u03B1\u03BC\u03AD\u03BD\u03BF\u03B9 \u03BF\u03C1\u03B9\u03C3\u03BC\u03BF\u03AF \u03C0\u03C4\u03C5\u03C7\u03CE\u03BD
+AlfrescoOutputManager.schemaError.title=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03C3\u03C4\u03BF \u03C3\u03C7\u03AE\u03BC\u03B1
+AlfrescoModelDialog.missingTypeDefinitions.msg=\u039F\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03B1\u03BD\u03B1\u03C6\u03AD\u03C1\u03BF\u03BD\u03C4\u03B1\u03B9 \u03C3\u03B5 \u03AC\u03B3\u03BD\u03C9\u03C3\u03C4\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03AE \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03B1 Alfresco: ${0}.\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C0\u03B1\u03C1\u03AD\u03C7\u03B5\u03C4\u03B5 \u03C4\u03B1 \u03B1\u03C1\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 alfresco \u03C0\u03BF\u03C5 \u03C4\u03B9\u03C2 \u03BF\u03C1\u03AF\u03B6\u03BF\u03C5\u03BD.
+AlfrescoModelDialog.missingTypeDefinitions.title=\u03A7\u03B1\u03BC\u03AD\u03BD\u03BF\u03B9 \u03BF\u03C1\u03B9\u03C3\u03BC\u03BF\u03AF \u03C4\u03CD\u03C0\u03C9\u03BD
+AlfrescoModelDialog.add=\u03A0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7
+AlfrescoOutputModelManager.errorReadingModel=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03B1\u03BD\u03AC\u03B3\u03BD\u03C9\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 Alfresco \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoModelDialog.aspects=\u03A0\u03C4\u03C5\u03C7\u03AD\u03C2
+AlfrescoOutputManager.schemaError.msg=\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C3\u03C5\u03B3\u03C7\u03C1\u03BF\u03BD\u03AF\u03C3\u03C4\u03B5 \u03C0\u03C1\u03CE\u03C4\u03B1 \u03C4\u03BF \u03C3\u03C7\u03AE\u03BC\u03B1
+AlfrescoOutputModelManager.alreadyAdded=\u0391\u03C5\u03C4\u03CC \u03C4\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03AD\u03C7\u03B5\u03B9 \u03AE\u03B4\u03B7 \u03C0\u03C1\u03BF\u03C3\u03C4\u03B5\u03B8\u03B5\u03AF
+AlfrescoModelDialog.removeModelFailed=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03B1\u03C0\u03BF\u03BC\u03AC\u03BA\u03C1\u03C5\u03BD\u03C3\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoOutputModelManager.prefixConflict=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03C0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5, \u03C3\u03CD\u03B3\u03BA\u03C1\u03BF\u03C5\u03C3\u03B7 \u03C0\u03C1\u03BF\u03B8\u03AD\u03BC\u03B1\u03C4\u03BF\u03C2 \u03BC\u03B5 \u03C0\u03C1\u03BF\u03B7\u03B3\u03BF\u03CD\u03BC\u03B5\u03BD\u03B1 \u03C0\u03C1\u03BF\u03C3\u03B9\u03B8\u03AD\u03BC\u03B5\u03BD\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03B3\u03B9\u03B1
+AlfrescoOutputModelManager.notYetAdded=\u03A4\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03B1\u03C5\u03C4\u03CC \u03B4\u03B5\u03BD \u03AD\u03C7\u03B5\u03B9 \u03C0\u03C1\u03BF\u03C3\u03C4\u03B5\u03B8\u03B5\u03AF \u03B1\u03BA\u03CC\u03BC\u03B1
+AlfrescoModelDialog.type=\u03A4\u03CD\u03C0\u03BF\u03C2
+AlfrescoModelDialog.addModelFailed=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C3\u03C4\u03B7\u03BD \u03C0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoModelDialog.modelTable.name=\u038C\u03BD\u03BF\u03BC\u03B1
+AlfrescoModelDialog.remove=\u0391\u03C6\u03B1\u03AF\u03C1\u03B5\u03C3\u03B7
+AlfrescoOutputManager.failedLoadModel=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03B1\u03C0\u03CC \u03BC\u03B5\u03C4\u03B1\u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5, \u03B5\u03C0\u03B1\u03BD\u03B5\u03BA\u03BA\u03AF\u03BD\u03B7\u03C3\u03B7

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_en.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=The chosen aspects refer to unknown Alfresco aspect(s) : ${0}.\nPlease provide the alfresco model files that define them.
+AlfrescoModelDialog.modelTable.title=Title
+AlfrescoModelDialog.availableAspects=Available Aspects
+AlfrescoModelDialog.missingAspectDefinitions.title=Missing aspect definitions
+AlfrescoOutputManager.schemaError.title=Error in schema
+AlfrescoModelDialog.missingTypeDefinitions.msg=The chosen type refers to unknown Alfresco type(s) or aspect(s) : ${0}.\nPlease provide the alfresco model files that define them.
+AlfrescoModelDialog.missingTypeDefinitions.title=Missing type definitions
+AlfrescoModelDialog.add=Add...
+AlfrescoOutputModelManager.errorReadingModel=Error reading Alfresco model file
+AlfrescoModelDialog.aspects=Aspects
+AlfrescoOutputManager.schemaError.msg=Please synchronize schema first
+AlfrescoOutputModelManager.alreadyAdded=This model has already been added
+AlfrescoModelDialog.removeModelFailed=Failed to remove model
+AlfrescoOutputModelManager.prefixConflict=Unable to add the model, prefix conflict with previously added model for
+AlfrescoOutputModelManager.notYetAdded=This model has not yet been added
+AlfrescoModelDialog.type=Type
+AlfrescoModelDialog.addModelFailed=Failed to add model
+AlfrescoModelDialog.modelTable.name=Name
+AlfrescoModelDialog.remove=Remove
+AlfrescoOutputManager.failedLoadModel=Failed to load model from component metadata, reinitializing

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_fr.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=Les aspects s\u00E9lectionn\u00E9s se r\u00E9f\u00E8rent \u00E0 des aspects Alfresco inconnus : ${0}.\nVeuillez fournir les mod\u00E8les Alfresco qui les d\u00E9finissent.
+AlfrescoModelDialog.modelTable.title=Titre
+AlfrescoModelDialog.availableAspects=Aspects disponibles
+AlfrescoModelDialog.missingAspectDefinitions.title=D\u00E9finitions d'aspects manquantes
+AlfrescoOutputManager.schemaError.title=Erreur dans le sch\u00E9ma
+AlfrescoModelDialog.missingTypeDefinitions.msg=Le type s\u00E9lectionn\u00E9 se r\u00E9f\u00E8re \u00E0 des aspects ou types Alfresco inconnus : ${0}. Veuillez fournir les mod\u00E8les Alfresco qui les d\u00E9finissent.
+AlfrescoModelDialog.missingTypeDefinitions.title=D\u00E9finitions de type manquantes
+AlfrescoModelDialog.add=Ajouter...
+AlfrescoOutputModelManager.errorReadingModel=Erreur de lecture du fichier mod\u00E8le Alfresco
+AlfrescoModelDialog.aspects=Aspects
+AlfrescoOutputManager.schemaError.msg=Veuillez synchroniser le sch\u00E9ma d'abord
+AlfrescoOutputModelManager.alreadyAdded=Ce mod\u00E8le a d\u00E9j\u00E0 \u00E9t\u00E9 ajout\u00E9
+AlfrescoModelDialog.removeModelFailed=Echec de la suppression du mod\u00E8le
+AlfrescoOutputModelManager.prefixConflict=Impossible d'ajouter le mod\u00E8le, pr\u00E9fixe en conflit avec le mod\u00E8le ajout\u00E9 pr\u00E9c\u00E9demment pour
+AlfrescoOutputModelManager.notYetAdded=Ce mod\u00E8le n'a pas encore \u00E9t\u00E9 ajout\u00E9
+AlfrescoModelDialog.type=Type
+AlfrescoModelDialog.addModelFailed=Echec de l'ajout du mod\u00E8le
+AlfrescoModelDialog.modelTable.name=Nom
+AlfrescoModelDialog.remove=Supprimer
+AlfrescoOutputManager.failedLoadModel=\u00C9chec du chargement du mod\u00E8le depuis les m\u00E9tadonn\u00E9es du composant, r\u00E9initialisation.

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_hr.properties

@@ -0,0 +1,14 @@
+AlfrescoModelDialog.modelTable.title=Naslov
+AlfrescoOutputManager.schemaError.title=Gre\u0161ka u schemi
+AlfrescoModelDialog.missingTypeDefinitions.title=Nedostaju definicije tipa
+AlfrescoModelDialog.add=Dodaj...
+AlfrescoOutputModelManager.errorReadingModel=Gre\u0161ka prilikom \u010Ditanja datoteke s Alfresco modelom
+AlfrescoOutputManager.schemaError.msg=Najprije sinkronizirajte schemu, molim
+AlfrescoOutputModelManager.alreadyAdded=Taj model je ve\u0107 dodan
+AlfrescoModelDialog.removeModelFailed=Ne mogu ukloniti model
+AlfrescoOutputModelManager.prefixConflict=Ne mogu dodati model, prefix je u konfliktu sa prethodno dodanim modelom za
+AlfrescoOutputModelManager.notYetAdded=Taj model jo\u0161 nije dodan
+AlfrescoModelDialog.addModelFailed=Dodavanje modela nije uspjelo
+AlfrescoModelDialog.modelTable.name=Ime
+AlfrescoModelDialog.remove=Ukloni
+AlfrescoOutputManager.failedLoadModel=U\u010Ditavanje modela iz metapodataka komponente nije uspjelo, reinicijaliziram

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_ja.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=\u9078\u629E\u3055\u308C\u305F\u30A2\u30B9\u30DA\u30AF\u30C8\u306F\u4E0D\u660E\u306EAlfresco\u30A2\u30B9\u30DA\u30AF\u30C8:${0}\u3092\u53C2\u7167\u3057\u3066\u3044\u307E\u3059\u3002\u305D\u308C\u3089\u3092\u5B9A\u7FA9\u3057\u305FAlfresco\u30E2\u30C7\u30EB\u30D5\u30A1\u30A4\u30EB\u3092\u63D0\u4F9B\u3057\u3066\u304F\u3060\u3055\u3044\u3002
+AlfrescoModelDialog.modelTable.title=\u30BF\u30A4\u30C8\u30EB
+AlfrescoModelDialog.availableAspects=\u53EF\u80FD\u306A\u30A2\u30B9\u30DA\u30AF\u30C8
+AlfrescoModelDialog.missingAspectDefinitions.title=\u30A2\u30B9\u30DA\u30AF\u30C8\u5B9A\u7FA9\u304C\u3042\u308A\u307E\u305B\u3093\u3002
+AlfrescoOutputManager.schemaError.title=\u30B9\u30AD\u30FC\u30DE\u306E\u30A8\u30E9\u30FC
+AlfrescoModelDialog.missingTypeDefinitions.msg=\u9078\u629E\u3057\u305F\u65B9\u306F\u4E0D\u660E\u306EAlfresco\u578B\u3082\u3057\u304F\u306F\u30A2\u30B9\u30DA\u30AF\u30C8${0}\u3092\u53C2\u7167\u3057\u3066\u3044\u307E\u3059\u3002\u305D\u308C\u3089\u3092\u5B9A\u7FA9\u3057\u305FAlfresco\u30E2\u30C7\u30EB\u30D5\u30A1\u30A4\u30EB\u3092\u63D0\u4F9B\u3057\u3066\u304F\u3060\u3055\u3044\u3002
+AlfrescoModelDialog.missingTypeDefinitions.title=\u578B\u5B9A\u7FA9\u304C\u3042\u308A\u307E\u305B\u3093
+AlfrescoModelDialog.add=\u8FFD\u52A0...
+AlfrescoOutputModelManager.errorReadingModel=Alfresco\u30E2\u30C7\u30EB\u30D5\u30A1\u30A4\u30EB\u306E\u8AAD\u8FBC\u307F\u30A8\u30E9\u30FC
+AlfrescoModelDialog.aspects=\u30A2\u30B9\u30DA\u30AF\u30C8
+AlfrescoOutputManager.schemaError.msg=\u6700\u521D\u306B\u30B9\u30AD\u30FC\u30DE\u3092\u540C\u671F\u3057\u3066\u304F\u3060\u3055\u3044\u3002
+AlfrescoOutputModelManager.alreadyAdded=\u3053\u306E\u30E2\u30C7\u30EB\u306F\u65E2\u306B\u8FFD\u52A0\u6E08\u307F\u3067\u3059\u3002
+AlfrescoModelDialog.removeModelFailed=\u30E2\u30C7\u30EB\u306E\u524A\u9664\u306B\u5931\u6557\u3057\u307E\u3057\u305F
+AlfrescoOutputModelManager.prefixConflict=\u5148\u306B\u8FFD\u52A0\u3055\u308C\u305F\u30E2\u30C7\u30EB\u306E\u30D7\u30EC\u30D5\u30A3\u30C3\u30AF\u30B9\u306E\u885D\u7A81\u306E\u305F\u3081\u3001\u30E2\u30C7\u30EB\u306E\u8FFD\u52A0\u304C\u51FA\u6765\u307E\u305B\u3093\u3002
+AlfrescoOutputModelManager.notYetAdded=\u3053\u306E\u30E2\u30C7\u30EB\u306F\u307E\u3060\u8FFD\u52A0\u3055\u308C\u3066\u3044\u307E\u305B\u3093\u3002
+AlfrescoModelDialog.type=\u30BF\u30A4\u30D7
+AlfrescoModelDialog.addModelFailed=\u30E2\u30C7\u30EB\u8FFD\u52A0\u306B\u5931\u6557\u3057\u307E\u3057\u305F\u3002
+AlfrescoModelDialog.modelTable.name=\u540D\u524D
+AlfrescoModelDialog.remove=\u524A\u9664
+AlfrescoOutputManager.failedLoadModel=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u30E1\u30BF\u30C7\u30FC\u30BF\u304B\u3089\u30E2\u30C7\u30EB\u30ED\u30FC\u30C9\u306B\u5931\u6557\u3057\u307E\u3057\u305F\u3002\u518D\u521D\u671F\u5316\u4E2D

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_kr.properties

@@ -0,0 +1,5 @@
+AlfrescoModelDialog.modelTable.title=\uC81C\uBAA9
+AlfrescoOutputManager.schemaError.title=\uC2A4\uD0A4\uB9C8 \uC624\uB958
+AlfrescoOutputModelManager.alreadyAdded=\uC774 \uBAA8\uB378\uC740 \uC774\uBBF8 \uCD94\uAC00\uB418\uC5C8\uC2B5\uB2C8\uB2E4
+AlfrescoOutputModelManager.notYetAdded=\uC774 \uBAA8\uB378\uC740 \uC544\uC9C1 \uCD94\uAC00\uB418\uC9C0 \uC54A\uC558\uC2B5\uB2C8\uB2E4
+AlfrescoModelDialog.modelTable.name=\uC774\uB984

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_nl.properties

@@ -0,0 +1,5 @@
+AlfrescoModelDialog.modelTable.title=Titel
+AlfrescoOutputManager.schemaError.title=Fout in schema
+AlfrescoModelDialog.add=Toevoegen
+AlfrescoModelDialog.removeModelFailed=Fout bij verwijderen model
+AlfrescoModelDialog.modelTable.name=Naam

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_pl.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=Wybrane aspekty odwo\u0142uj\u0105 si\u0119 do nieznanych aspekt\u00F3w Alfresco: ${0}. Podaj pliki modelu Alfresco, w kt\u00F3ych s\u0105 zdefiniowane.
+AlfrescoModelDialog.modelTable.title=Tytu\u0142
+AlfrescoModelDialog.availableAspects=Dost\u0119pne aspekty
+AlfrescoModelDialog.missingAspectDefinitions.title=Brakuj\u0105ce definicje aspekt\u00F3w
+AlfrescoOutputManager.schemaError.title=B\u0142\u0105d w schemacie
+AlfrescoModelDialog.missingTypeDefinitions.msg=Wybrane typy odwo\u0142uj\u0105 si\u0119 do nieznanych typ\u00F3w lub aspekt\u00F3w Alfresco: ${0}. Podaj pliki modelu Alfresco, w kt\u00F3ych s\u0105 zdefiniowane.
+AlfrescoModelDialog.missingTypeDefinitions.title=Brakuj\u0105ce definicje typ\u00F3w
+AlfrescoModelDialog.add=Dodaj...
+AlfrescoOutputModelManager.errorReadingModel=B\u0142\u0105d podczas odczytu pliku modelu Alfresco
+AlfrescoModelDialog.aspects=Aspekty
+AlfrescoOutputManager.schemaError.msg=Najpierw zsynchronizuj schematy
+AlfrescoOutputModelManager.alreadyAdded=Ten model zosta\u0142 ju\u017C dodany
+AlfrescoModelDialog.removeModelFailed=Niepowodzenie przy usuwaniu modelu
+AlfrescoOutputModelManager.prefixConflict=Nie mo\u017Cna doda\u0107 modelu, prefix jest w konflikcie z poprzednio dodanym modelem dla
+AlfrescoOutputModelManager.notYetAdded=Ten model nie zosta\u0142 jeszcze dodany
+AlfrescoModelDialog.type=Typ
+AlfrescoModelDialog.addModelFailed=Niepowodzenie przy dodawaniu modelu
+AlfrescoModelDialog.modelTable.name=Nazwa
+AlfrescoModelDialog.remove=Usu\u0144
+AlfrescoOutputManager.failedLoadModel=\u0141adowanie modelu z komponentu metadanych zako\u0144czone niepowodzeniem, ponowna pr\u00F3ba

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_pt_BR.properties

@@ -0,0 +1,18 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=Os aspectos escolhidos referem-se a aspecto(s) Alfresco desconhecido(s): $ {0}. Forne\u00E7a os arquivos do modelo alfresco que os define.
+AlfrescoModelDialog.modelTable.title=T\u00EDtulo
+AlfrescoModelDialog.availableAspects=Aspectos Disponiveis
+AlfrescoOutputManager.schemaError.title=Erro no esquema
+AlfrescoModelDialog.missingTypeDefinitions.msg=O tipo escolhido refere-se ao tipo (s) ou elemento (s) Alfresco desconhecido : $ (0). Forne\u00E7a o arquivos do modelo alfresco que os define.
+AlfrescoModelDialog.missingTypeDefinitions.title=Defini\u00E7\u00F5es de tipos faltando
+AlfrescoModelDialog.add=Adicionar...
+AlfrescoOutputModelManager.errorReadingModel=Erro lendo arquivo do modelo Alfresco 
+AlfrescoModelDialog.aspects=Aspectos
+AlfrescoOutputManager.schemaError.msg=Sincronize o esquema primeiro
+AlfrescoOutputModelManager.alreadyAdded=Este modelo j\u00E1 foi adicionado
+AlfrescoModelDialog.removeModelFailed=Falha ao remover modelo
+AlfrescoOutputModelManager.prefixConflict=N\u00E3o \u00E9 poss\u00EDvel adicionar o modelo. O prefixo est\u00E1 em conflito com um modelo adicionado previamente para
+AlfrescoOutputModelManager.notYetAdded=Este modelo aind n\u00E3o foi adicionado
+AlfrescoModelDialog.addModelFailed=Falha ao adicionar modelo
+AlfrescoModelDialog.modelTable.name=Nome
+AlfrescoModelDialog.remove=Remover
+AlfrescoOutputManager.failedLoadModel=Falha ao carregar modelo do metadado do componente, reinicializando

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_ro.properties

@@ -0,0 +1,3 @@
+AlfrescoModelDialog.type=Tip
+AlfrescoModelDialog.modelTable.name=Nume
+AlfrescoModelDialog.remove=Sterge

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_tr.properties

@@ -0,0 +1,4 @@
+AlfrescoModelDialog.modelTable.title=Ba\u015Fl\u0131k
+AlfrescoModelDialog.add=Ekle...
+AlfrescoModelDialog.type=Tip
+AlfrescoModelDialog.modelTable.name=Ad\u0131

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_zh_CN.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=\u6240\u9009\u62E9\u7684\u65B9\u9762\u6D89\u53CA\u672A\u77E5\u7684Alfresco\u65B9\u9762: ${0}.\u8BF7\u63D0\u4F9Balfresco \u6A21\u578B\u6587\u4EF6\u5B9A\u4E49\u4ED6\u4EEC.
+AlfrescoModelDialog.modelTable.title=\u6807\u9898
+AlfrescoModelDialog.availableAspects=\u53EF\u7528\u56E0\u7D20
+AlfrescoModelDialog.missingAspectDefinitions.title=\u7F3A\u7701\u65B9\u9762\u5B9A\u4E49
+AlfrescoOutputManager.schemaError.title=Schema \u9519\u8BEF
+AlfrescoModelDialog.missingTypeDefinitions.msg=\u6240\u9009\u62E9\u7684\u7C7B\u578B\u6D89\u53CA\u672A\u77E5\u7684Alfresco\u7C7B\u578B\u6216\u65B9\u9762: ${0}.\uFF0C\u8BF7\u63D0\u4F9Balfresco \u6A21\u578B\u6587\u4EF6\u5B9A\u4E49\u4ED6\u4EEC.
+AlfrescoModelDialog.missingTypeDefinitions.title=\u7F3A\u7701\u7C7B\u578B\u5B9A\u4E49
+AlfrescoModelDialog.add=\u6DFB\u52A0...
+AlfrescoOutputModelManager.errorReadingModel=\u8BFB\u53D6Alfresco\u7684\u6A21\u578B\u6587\u4EF6\u9519\u8BEF
+AlfrescoModelDialog.aspects=\u65B9\u9762
+AlfrescoOutputManager.schemaError.msg=\u8BF7\u5148\u540C\u6B65 schema
+AlfrescoOutputModelManager.alreadyAdded=\u8BE5\u6A21\u578B\u5DF2\u6DFB\u52A0
+AlfrescoModelDialog.removeModelFailed=\u79FB\u9664\u6A21\u578B\u5931\u8D25
+AlfrescoOutputModelManager.prefixConflict=\u65E0\u6CD5\u6DFB\u52A0\u6A21\u578B\uFF0C\u524D\u7F00\u4E0E\u4EE5\u524D\u6DFB\u52A0\u6A21\u578B\u51B2\u7A81
+AlfrescoOutputModelManager.notYetAdded=\u8BE5\u6A21\u578B\u5C1A\u672A\u6DFB\u52A0
+AlfrescoModelDialog.type=\u7C7B\u578B
+AlfrescoModelDialog.addModelFailed=\u6DFB\u52A0\u6A21\u578B\u5931\u8D25
+AlfrescoModelDialog.modelTable.name=\u540D\u79F0
+AlfrescoModelDialog.remove=\u79FB\u9664
+AlfrescoOutputManager.failedLoadModel=\u65E0\u6CD5\u52A0\u8F7D\u7684\u7EC4\u4EF6\u5143\u6570\u636E\u6A21\u578B, \u91CD\u65B0\u521D\u59CB\u5316

i18n/plugins/org.talend.designer.business.diagram.nl/.classpath

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<classpath>
+	<classpathentry kind="src" path="src"/>
+	<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
+	<classpathentry kind="con" path="org.eclipse.pde.core.requiredPlugins"/>
+	<classpathentry kind="output" path="classes"/>
+</classpath>

i18n/plugins/org.talend.designer.business.diagram.nl/.project

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>org.talend.designer.business.diagram.nl</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.jdt.core.javabuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.ManifestBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.SchemaBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.pde.PluginNature</nature>
+		<nature>org.eclipse.jdt.core.javanature</nature>
+	</natures>
+</projectDescription>

i18n/plugins/org.talend.designer.business.diagram.nl/META-INF/MANIFEST.MF

@@ -0,0 +1,9 @@
+Manifest-Version: 1.0
+Bundle-ManifestVersion: 2
+Bundle-Name: Nl Fragment
+Bundle-SymbolicName: org.talend.designer.business.diagram.nl
+Bundle-Version: 7.3.1.qualifier
+Bundle-Vendor: .Talend SA.
+Fragment-Host: org.talend.designer.business.diagram
+Bundle-Localization: plugin
+Bundle-ClassPath: .

i18n/plugins/org.talend.designer.business.diagram.nl/build.properties

@@ -0,0 +1,13 @@
+source.. = src/
+output.. = classes/
+bin.includes = META-INF/,\
+               .,\
+               plugin_de.properties,\
+               plugin_en.properties,\
+               plugin_fr.properties,\
+               plugin_it.properties,\
+	       plugin_zh_CN.properties\
+	       ,plugin_ru.properties\
+	       ,plugin_el.properties\
+	       ,plugin_ja.properties\
+	       ,plugin_swtbot.properties

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_de.properties

@@ -0,0 +1,2 @@
+providerName=Talend SA.
+repository.businessProcess=Business Modell

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_el.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=\u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03C3\u03B9\u03B1\u03BA\u03CC \u03A0\u03C1\u03CC\u03C3\u03B8\u03B5\u03C4\u03BF
+repository.businessProcess=\u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03AC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03B1

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_en.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=Business Plugin
+repository.businessProcess=Business Models

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_fr.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=Plug-in m\u00E9tier
+repository.businessProcess=Business Models

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_it.properties

@@ -0,0 +1,2 @@
+providerName=.Talend SA.
+repository.businessProcess=Modelli Business

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_ja.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=\u30D3\u30B8\u30CD\u30B9 \u30D7\u30E9\u30B0\u30A4\u30F3
+repository.businessProcess=\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_jp.properties

@@ -0,0 +1,2 @@
+providerName=.Talend SA.
+pluginName=\u30D3\u30B8\u30CD\u30B9\u30D7\u30E9\u30B0\u30A4\u30F3

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_ru.properties

@@ -0,0 +1,2 @@
+providerName=.Talend SA.
+pluginName=\u0411\u0438\u0437\u043D\u0435\u0441-\u043C\u043E\u0434\u0443\u043B\u044C

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_swtbot.properties

@@ -0,0 +1,3 @@
+pluginName=Business Plugin
+providerName=.Talend SA.
+repository.businessProcess=Business Models

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_zh_CN.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=\u7EC4\u4EF6\u6A21\u5757
+repository.businessProcess=\u4E1A\u52A1\u6A21\u578B

i18n/plugins/org.talend.designer.business.diagram.nl/pom.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <parent>
+    <groupId>org.talend.studio</groupId>
+    <artifactId>tdi-studio-se</artifactId>
+    <version>7.3.1-PATCH</version>
+    <relativePath>../../../</relativePath>
+  </parent>
+  <artifactId>org.talend.designer.business.diagram.nl</artifactId>
+  <packaging>eclipse-plugin</packaging>
+</project>

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ar.properties

@@ -0,0 +1,56 @@
+BusinessInitDiagramFileAction.DiagramFile=\u0645\u0644\u0641 \u0627\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.ValueOfLongIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0637\u0648\u064A\u0644
+BusinessAbstractParser.ValueOfFloatIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0639\u0634\u0631\u064A
+BusinessPaletteFactory.DataComment=\u0625\u0646\u0634\u0627\u0621 \u0628\u064A\u0627\u0646\u0627\u062A \u062C\u062F\u064A\u062F\u0629
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u0625\u0646\u0634\u0627\u0621 \u0645\u062E\u0637\u0637 \u0623\u0639\u0645\u0627\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.StringIntegerConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0631\u0642\u0645\u064A\u0629
+BusinessAbstractParser.StringLongConverError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0637\u0648\u064A\u0644\u0629
+AssignmentPropertySection.DeleteAssignment=\u062D\u0630\u0641 \u062A\u0643\u0644\u064A\u0641
+AssignmentPropertySection.Type=\u0646\u0648\u0639
+BusinessPaletteFactory.BidirectionalRelationShip=\u0639\u0644\u0627\u0642\u0629 \u062B\u0646\u0627\u0626\u064A\u0629 \u0627\u0644\u0627\u062A\u062C\u0627\u0647
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u0627\u062A\u062C\u0627\u0647 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u062C\u062F\u064A\u062F\u0629 \u062B\u0646\u0627\u0626\u064A\u0629 \u0627\u0644\u0627\u062A\u062C\u0627\u0647
+AssignmentPropertySection.Name=\u0627\u0644\u0627\u0633\u0645
+BusinessNewDiagramFileWizard.DiagramRootElement=\u0639\u0646\u0635\u0631 \u0627\u0644\u0645\u062E\u0637\u0637 \u0627\u0644\u062C\u0630\u0631\u064A
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u0644\u0645 \u064A\u062A\u0645 \u0627\u062E\u062A\u064A\u0627\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0628\u0627\u064A\u062A
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u062D\u0631\u0641
+BusinessPaletteFactory.ActionComment=\u0625\u0646\u0634\u0627\u0621 \u0639\u0645\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0646\u0635
+BusinessInitDiagramFileAction.Error=\u062E\u0637\u0623
+BusinessNewDiagramFileWizard.SelectRootElement=\u0627\u062E\u062A\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessPaletteFactory.TerminalComment=\u0625\u0646\u0634\u0627\u0621 \u0645\u062D\u0637\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessAbstractParser.ValueOfShortIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0642\u0635\u064A\u0631
+BusinessPaletteFactory.DatabaseComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0627\u0639\u062F\u0629 \u0628\u064A\u0627\u0646\u0627\u062A \u062C\u062F\u064A\u062F\u0629
+AssignmentPropertySection.Comment=\u062A\u0639\u0644\u064A\u0642
+BusinessInitDiagramFileAction.IntialNew=\u062A\u0647\u064A\u0626\u0629 \u062C\u062F\u064A\u062F
+BusinessPaletteFactory.Terminal=\u0645\u062D\u0637\u0629
+BusinessAbstractParser.InvalidInputAt=\u062E\u0637\u0623 \u0625\u062F\u062E\u0627\u0644 \u0641\u064A
+BusinessPaletteFactory.InputComment=\u0625\u0646\u0634\u0627\u0621 \u0645\u062F\u062E\u0644 \u062C\u062F\u064A\u062F
+BusinessPaletteFactory.Data=\u0628\u064A\u0627\u0646\u0627\u062A
+BusinessPaletteFactory.Ellipse=\u0642\u0637\u0639 \u0646\u0627\u0642\u0635
+BusinessPaletteFactory.Input=\u0645\u062F\u062E\u0644
+BusinessPaletteFactory.Relationshop=\u0639\u0644\u0627\u0642\u0629
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0645\u0646\u0637\u0642\u064A
+BusinessPaletteFactory.decision=\u0642\u0631\u0627\u0631
+BusinessPaletteFactory.Document=\u0648\u062B\u064A\u0642\u0629
+BusinessPaletteFactory.CreateActor=\u0625\u0646\u0634\u0627\u0621 \u0645\u0645\u062B\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.StringDoubleConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0645\u0632\u062F\u0648\u062C\u0629
+BusinessPaletteFactory.Actor=\u0645\u0645\u062B\u0644
+BusinessCreationWizardPage.CreateBusinessDiagram=\u0625\u0646\u0634\u0627\u0621 \u0645\u062E\u0637\u0637 \u0623\u0639\u0645\u0627\u0644
+BusinessPaletteFactory.ListComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0627\u0626\u0645\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.DirectionalRelationShip=\u0639\u0644\u0627\u0642\u0629 \u0627\u062A\u062C\u0627\u0647
+BusinessPaletteFactory.Action=\u0627\u0644\u0639\u0645\u0644
+BusinessPaletteFactory.RelationshopComment=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.DecisionComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0631\u0627\u0631 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0645\u0632\u062F\u0648\u062C
+BusinessPaletteFactory.CreateEllipse=\u0625\u0646\u0634\u0627\u0621 \u0642\u0637\u0639 \u0646\u0627\u0642\u0635
+BusinessNewDiagramFileWizard.DiagramFile=\u0645\u0644\u0641 \u0627\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.StringShortConverError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0642\u0635\u064A\u0631\u0629
+BusinessPaletteFactory.DocuemntComment=\u0625\u0646\u0634\u0627\u0621 \u0648\u062B\u064A\u0642\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0631\u0642\u0645 \u0635\u062D\u064A\u062D
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u0627\u062E\u062A\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.StringFloatConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0639\u0634\u0631\u064A\u0629
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0628\u0627\u064A\u062A
+DeleteAssignmentAction.DeleteAssignment=\u062D\u0630\u0641 \u062A\u0643\u0644\u064A\u0641
+BusinessDiagramEditor.canNotSaveTitle=\u062A\u062D\u0630\u064A\u0631

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_de.properties

@@ -0,0 +1,82 @@
+BusinessInitDiagramFileAction.DiagramFile=Diagramm-Datei
+BusinessAbstractParser.ValueOfLongIsExpected=Wert vom Typ Long wird erwartet
+BusinessAbstractParser.ValueOfFloatIsExpected=Float-Wert wird erwartet
+BusinessPaletteFactory.DataComment=Daten hinzuf\u00FCgen
+CreateDiagramAction.CreateBusinessModel=Erstelle Business Model
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Neues Business-Diagramm erstellen
+BusinessAbstractParser.StringIntegerConvertError=String-Wert l\u00E4sst sich nicht in Integer-Wert umwandeln
+BusinessPaletteFactory.CreateGear=Zahnrad hinzuf\u00FCgen
+SimpleBusinessCreationWizardPage.Title=Neues Business Model
+BusinessNewDiagramFileWizard.CreateNewDiagram=Erstellt neues Diagramm auf Basis des {0} model Inhaltes
+BusinessAbstractParser.UnknownLiteral=Unbekanntes Zeichen:
+BusinessAbstractParser.StringLongConverError=String-Wert l\u00E4sst sich nicht in Long-Wert umwandeln
+AssignmentPropertySection.DeleteAssignment=Zuordnung l\u00F6schen
+AssignmentPropertySection.Type=Typ
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Verf\u00FCgbare Domain-Model Elemente:
+BusinessPaletteFactory.BidirectionalRelationShip=Bidirektionale Beziehung
+BusinessPaletteFactory.CreateDirectionalRelationShip=Direktionale Beziehung hinzuf\u00FCgen
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Bidirektionale Beziehung hinzuf\u00FCgen
+AssignmentPropertySection.Name=Name
+CreateAssignmentCommand.CannotAssign=Zuordnung nicht m\u00F6glich.
+BusinessNewDiagramFileWizard.DiagramRootElement=Diagramm root-Element
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Kein Diagram-Root Element ausgew\u00E4hlt
+BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number: 
+OpenDiagramAction.EditBusinessModel=Business-Modell bearbeiten
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Wert vom Typ Byte wird erwartet
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Character-Wert erwarted
+BusinessPaletteFactory.ActionComment=Neue Action erzeugen
+BusinessAbstractParser.ValueOfTypeStringIsExpected=String-Wert erwartet
+BusinessInitDiagramFileAction.Error=Fehler
+BusinessNewDiagramFileWizard.SelectRootElement=Diagram-Root Element w\u00E4hlen
+RepositoryFactoryProxyLabelProvider.Deleted= (gel\u00F6scht)
+BusinessPaletteFactory.TerminalComment=Terminal hinzuf\u00FCgen
+BusinessAbstractParser.ValueOfShortIsExpected=Wert vom Typ Short wird erwartet
+BusinessPaletteFactory.DatabaseComment=Neue Datenbank erstellen
+AssignmentPropertySection.Comment=Kommentar
+SimpleBusinessCreationWizard.NewBusinessModel=Neues Business Model
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Ung\u00FCltiges Diagram-Root Element ausgew\u00E4hlt
+BusinessInitDiagramFileAction.IntialNew=Neu initialisieren
+FindAssignmentAction.FindAssignments=Finde Zuordnungen
+RepositoryFactoryProxyLabelProvider.NotFound= (nicht gefunden)
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Ung\u00FCltige Eingabe bei
+BusinessPaletteFactory.Gear=Verzweigung
+BusinessPaletteFactory.InputComment=Neue Eingabe erstellen
+BusinessPaletteFactory.Data=Daten
+BusinessPaletteFactory.Ellipse=Ellipse
+BusinessPaletteFactory.Input=Eingabe
+BusinessPaletteFactory.List=Liste
+BusinessPaletteFactory.Relationshop=Beziehung
+BusinessAbstractParser.ValueOfBooleanIsExpected=Boolean-Wert erwartet
+BusinessPaletteFactory.decision=Entscheidung
+BusinessPaletteFactory.Document=Dokument
+BusinessModelingAssistantProvider.SelectDomainModelElement=W\u00E4hlen Sie ein domain model Element aus
+BusinessPaletteFactory.CreateActor=Akteur hinzuf\u00FCgen
+BusinessAbstractParser.StringDoubleConvertError=String-Wert l\u00E4sst sich nicht in Double-Wert umwandeln
+BusinessPaletteFactory.Actor=Akteur
+EditAction.Edit=Bearbeite
+BusinessCreationWizardPage.CreateBusinessDiagram=Business-Diagramm erstellen
+BusinessPaletteFactory.Database=Datenbank
+BusinessPaletteFactory.ListComment=Neue Liste erstellen
+BusinessPaletteFactory.DirectionalRelationShip=Gerichtete Beziehung
+BusinessPaletteFactory.Action=Action
+BusinessPaletteFactory.RelationshopComment=Neue Beziehung erstellen
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=Laden der Model-Datei fehlgeschlagen
+BusinessPaletteFactory.DecisionComment=Entscheidung hinzuf\u00FCgen
+BusinessAbstractParser.ValueOfDoubleIsExpected=Double-Wert wird erwartet
+OpenDiagramAction.ReadBusinessModel=Lese Business Model
+BusinessInitDiagramFileAction.UnableToLoadResource=Ressource kann nicht geladen werden:
+BusinessPaletteFactory.CreateEllipse=Ellipse hinzuf\u00FCgen
+BusinessNewDiagramFileWizard.DiagramFile=Diagramm Datei
+BusinessAbstractParser.StringShortConverError=String-Wert l\u00E4sst sich nicht in Short-Wert umwandeln
+BusinessPaletteFactory.DocuemntComment=Dokument hinzuf\u00FCgen
+BusinessAbstractParser.ValueOfIntegerIsExpected=Integer-Wert erwartet
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Diagram-Root Element w\u00E4hlen:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=W\u00E4hlen Sie das semantische Modell-Element aus zur Darstellung im Diagramm
+BusinessAbstractParser.StringFloatConvertError=String-Wert l\u00E4sst sich nicht in Float-Wert umwandeln
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String-Wert l\u00E4sst sich nicht in Byte-Wert umwandeln
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Neue Ecore-Diagramm-Datei initialisieren
+BusinessTooltipFigure.assignedMeta={0} zugewiesene Metadaten
+DeleteAssignmentAction.DeleteAssignment=Zuordnung l\u00F6schen
+BusinessDiagramEditor.canNotSaveTitle=Warnung

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_el.properties

@@ -0,0 +1,78 @@
+BusinessInitDiagramFileAction.DiagramFile=\u03B1\u03C1\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessAbstractParser.ValueOfLongIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Long \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessAbstractParser.ValueOfFloatIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Float \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.DataComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03BF\u03C5
+CreateDiagramAction.CreateBusinessModel=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03B5\u03BD\u03CC\u03C2 \u03BD\u03AD\u03BF\u03C5 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2.
+BusinessAbstractParser.StringIntegerConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Integer
+SimpleBusinessCreationWizardPage.Title=\u039D\u03AD\u03BF \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF
+BusinessNewDiagramFileWizard.CreateNewDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2 \u03B2\u03B1\u03C3\u03B9\u03C3\u03BC\u03AD\u03BD\u03BF \u03C3\u03C4\u03BF \u03C0\u03B5\u03C1\u03B9\u03B5\u03C7\u03CC\u03BC\u03B5\u03BD\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 {0}
+BusinessAbstractParser.StringLongConverError=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Long
+AssignmentPropertySection.DeleteAssignment=\u0394\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2
+AssignmentPropertySection.Type=\u03A4\u03CD\u03C0\u03BF\u03C2
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u0394\u03B9\u03B1\u03B8\u03AD\u03C3\u03B9\u03BC\u03B1 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03C4\u03BF\u03BC\u03AD\u03B1:
+BusinessPaletteFactory.BidirectionalRelationShip=\u0391\u03BC\u03C6\u03AF\u03B4\u03C1\u03BF\u03BC\u03B7 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u039A\u03B1\u03C4\u03B5\u03C5\u03B8\u03C5\u03BD\u03CC\u03BC\u03B5\u03BD\u03B7\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0391\u03BC\u03C6\u03AF\u03B4\u03C1\u03BF\u03BC\u03B7\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+AssignmentPropertySection.Name=\u038C\u03BD\u03BF\u03BC\u03B1
+CreateAssignmentCommand.CannotAssign=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2.
+BusinessNewDiagramFileWizard.DiagramRootElement=\u0392\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u0394\u03B5\u03BD \u03AD\u03C7\u03B5\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03B5\u03AF \u03B2\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessVisualIDRegistry.ParseError=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03B1\u03BD\u03AC\u03BB\u03C5\u03C3\u03B7\u03C2 \u03C4\u03CD\u03C0\u03BF\u03C5 \u03C0\u03C1\u03BF\u03B2\u03BF\u03BB\u03AE\u03C2 \u03C9\u03C2 \u03AD\u03BD\u03B1\u03BD \u03BF\u03C0\u03C4\u03B9\u03BA\u03CC \u03B1\u03C1\u03B9\u03B8\u03BC\u03CC \u03C4\u03B1\u03C5\u03C4\u03CC\u03C4\u03B7\u03C4\u03B1\u03C2:
+OpenDiagramAction.EditBusinessModel=\u0395\u03C0\u03B5\u03BE\u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Byte \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Character \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.ActionComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0394\u03C1\u03AC\u03C3\u03B7\u03C2
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 String \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessInitDiagramFileAction.Error=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1
+BusinessNewDiagramFileWizard.SelectRootElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03B2\u03B1\u03C3\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03B1\u03C4\u03BF\u03C2
+RepositoryFactoryProxyLabelProvider.Deleted=(\u0394\u03B9\u03B1\u03B3\u03C1\u03AC\u03C6\u03C4\u03B7\u03BA\u03B5)
+BusinessPaletteFactory.TerminalComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u03A4\u03B5\u03C1\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD
+BusinessAbstractParser.ValueOfShortIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Short \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.DatabaseComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0392\u03AC\u03C3\u03B7\u03C2 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+AssignmentPropertySection.Comment=\u03A3\u03C7\u03CC\u03BB\u03B9\u03BF
+SimpleBusinessCreationWizard.NewBusinessModel=\u039D\u03AD\u03BF \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u0395\u03C0\u03B9\u03BB\u03AD\u03C7\u03B8\u03B7\u03BA\u03B5 \u03BC\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03BF \u03B2\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessInitDiagramFileAction.IntialNew=\u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u03BD\u03AD\u03BF\u03C5
+FindAssignmentAction.FindAssignments=\u0395\u03CD\u03C1\u03B5\u03C3\u03B7 \u0391\u03BD\u03B1\u03B8\u03AD\u03C3\u03B5\u03C9\u03BD
+RepositoryFactoryProxyLabelProvider.NotFound=(\u0394\u03B5 \u0392\u03C1\u03AD\u03B8\u03B7\u03BA\u03B5)
+BusinessPaletteFactory.Terminal=\u03A4\u03B5\u03C1\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC
+BusinessAbstractParser.InvalidInputAt=\u039C\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03B7 \u03B5\u03AF\u03C3\u03BF\u03B4\u03BF\u03C2 \u03C3\u03B5
+BusinessPaletteFactory.InputComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0395\u03B9\u03C3\u03CC\u03B4\u03BF\u03C5
+BusinessPaletteFactory.Data=\u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1
+BusinessPaletteFactory.Ellipse=\u0388\u03BB\u03BB\u03B5\u03B9\u03C8\u03B7
+BusinessPaletteFactory.Input=\u0395\u03AF\u03C3\u03BF\u03B4\u03BF\u03C2
+BusinessPaletteFactory.List=\u039B\u03AF\u03C3\u03C4\u03B1
+BusinessPaletteFactory.Relationshop=\u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Boolean \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.decision=\u0391\u03C0\u03CC\u03C6\u03B1\u03C3\u03B7
+BusinessPaletteFactory.Document=\u0388\u03B3\u03B3\u03C1\u03B1\u03C6\u03BF
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03C4\u03BF\u03BC\u03AD\u03B1
+BusinessPaletteFactory.CreateActor=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0394\u03C1\u03AC\u03C3\u03C4\u03B7
+BusinessAbstractParser.StringDoubleConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Double
+BusinessPaletteFactory.Actor=\u0394\u03C1\u03AC\u03C3\u03C4\u03B7\u03C2
+EditAction.Edit=\u03B5\u03C0\u03B5\u03BE\u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1
+BusinessCreationWizardPage.CreateBusinessDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03B5\u03BD\u03CC\u03C2 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03BA\u03BF\u03CD \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessPaletteFactory.Database=\u03A0\u03B7\u03B3\u03AE \u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+BusinessPaletteFactory.ListComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u039B\u03AF\u03C3\u03C4\u03B1\u03C2
+BusinessPaletteFactory.DirectionalRelationShip=\u039A\u03B1\u03C4\u03B5\u03C5\u03B8\u03C5\u03BD\u03CC\u03BC\u03B5\u03BD\u03B7 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessPaletteFactory.Action=\u0394\u03C1\u03AC\u03C3\u03B7
+BusinessPaletteFactory.RelationshopComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+BusinessInitDiagramFileAction.LoadFaild=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessPaletteFactory.DecisionComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0391\u03C0\u03CC\u03C6\u03B1\u03C3\u03B7\u03C2
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Double \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+OpenDiagramAction.ReadBusinessModel=\u0391\u03BD\u03AC\u03B3\u03BD\u03C9\u03C3\u03B7 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessInitDiagramFileAction.UnableToLoadResource=\u0391\u03B4\u03CD\u03BD\u03B1\u03C4\u03BF \u03BD\u03B1 \u03C6\u03BF\u03C1\u03C4\u03C9\u03B8\u03B5\u03AF \u03BF \u03C0\u03CC\u03C1\u03BF\u03C2:
+BusinessPaletteFactory.CreateEllipse=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0388\u03BB\u03BB\u03B5\u03B9\u03C8\u03B7\u03C2
+BusinessNewDiagramFileWizard.DiagramFile=\u0391\u03C1\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessAbstractParser.StringShortConverError=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Short
+BusinessPaletteFactory.DocuemntComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0395\u03B3\u03B3\u03C1\u03AC\u03C6\u03BF\u03C5
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Integer \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03B2\u03B1\u03C3\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03B1\u03C4\u03BF\u03C2:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03C3\u03B7\u03BC\u03B1\u03C3\u03B9\u03BF\u03BB\u03BF\u03B3\u03B9\u03BA\u03BF\u03CD \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03B3\u03B9\u03B1 \u03B5\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C3\u03C4\u03BF \u03B4\u03B9\u03AC\u03B3\u03C1\u03B1\u03BC\u03BC\u03B1
+BusinessAbstractParser.StringFloatConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u03BD\u03AD\u03BF\u03C5 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2 Ecore
+BusinessTooltipFigure.assignedMeta={0} \u03BA\u03B1\u03B8\u03BF\u03C1\u03B9\u03C3\u03BC\u03AD\u03BD\u03B1 \u039C\u03B5\u03C4\u03B1\u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1
+DeleteAssignmentAction.DeleteAssignment=\u0394\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2
+BusinessDiagramEditor.canNotSaveTitle=\u03A0\u03C1\u03BF\u03B5\u03B9\u03B4\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_en.properties

@@ -0,0 +1,105 @@
+BusinessInitDiagramFileAction.DiagramFile= diagram file
+BusinessAbstractParser.ValueOfLongIsExpected=Value of type Long is expected
+BusinessAbstractParser.ValueOfFloatIsExpected=Value of type Float is expected
+BusinessPaletteFactory.DataComment=Create new Data
+CreateDiagramAction.CreateBusinessModel=Create Business Model
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Create a new Business diagram.
+BusinessAbstractParser.StringIntegerConvertError=String value cannot be converted to Integer value
+BusinessPaletteFactory.CreateGear=Create new Gear
+SimpleBusinessCreationWizardPage.Title=New Business Model
+BusinessNewDiagramFileWizard.CreateNewDiagram=Create new diagram based on {0}  model content
+BusinessAbstractParser.UnknownLiteral=Unknown literal: 
+BusinessAbstractParser.StringLongConverError=String value cannot be converted to Long value
+AssignmentPropertySection.DeleteAssignment=Delete Assignment
+AssignmentPropertySection.Type=Type
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Available domain model elements:
+BusinessPaletteFactory.BidirectionalRelationShip=Bidirectional Relationship
+BusinessPaletteFactory.CreateDirectionalRelationShip=Create new Directional Relationship
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Create new Bidirectional Relationship
+AssignmentPropertySection.Name=Name
+CreateAssignmentCommand.CannotAssign=Cannot Assign.
+BusinessNewDiagramFileWizard.DiagramRootElement=Diagram root element
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=No diagram root element selected
+BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number: 
+OpenDiagramAction.EditBusinessModel=Edit Business Model
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Value of type Byte is expected
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Value of type Character is expected
+BusinessPaletteFactory.ActionComment=Create new Action
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Value of type String is expected
+BusinessInitDiagramFileAction.Error=Error
+BusinessNewDiagramFileWizard.SelectRootElement=Select diagram root element
+RepositoryFactoryProxyLabelProvider.Deleted= (Deleted)
+BusinessPaletteFactory.TerminalComment=Create new Terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Value of type Short is expected
+BusinessPaletteFactory.DatabaseComment=Create new Database
+AssignmentPropertySection.Comment=Comment
+SimpleBusinessCreationWizard.NewBusinessModel=New Business Model
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Invalid diagram root element was selected
+BusinessInitDiagramFileAction.IntialNew=Initialize new 
+FindAssignmentAction.FindAssignments=Find Assignments
+RepositoryFactoryProxyLabelProvider.NotFound= (Not Found)
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Invalid input at 
+BusinessPaletteFactory.Gear=Gear
+BusinessPaletteFactory.InputComment=Create new Input
+BusinessPaletteFactory.Data=Data
+BusinessPaletteFactory.Ellipse=Ellipse
+BusinessPaletteFactory.Input=Input
+BusinessPaletteFactory.List=List
+BusinessPaletteFactory.Relationshop=Relationship
+BusinessAbstractParser.ValueOfBooleanIsExpected=Value of type Boolean is expected
+BusinessPaletteFactory.decision=Decision
+BusinessPaletteFactory.Document=Document
+BusinessModelingAssistantProvider.SelectDomainModelElement=Select domain model element
+BusinessPaletteFactory.CreateActor=Create new Actor
+BusinessAbstractParser.StringDoubleConvertError=String value cannot be converted to Double value
+BusinessPaletteFactory.Actor=Actor
+EditAction.Edit=Edit 
+BusinessCreationWizardPage.CreateBusinessDiagram=Create a Business diagram
+BusinessPaletteFactory.Database=Datasource
+BusinessPaletteFactory.ListComment=Create new List
+BusinessPaletteFactory.DirectionalRelationShip=Directional Relationship
+BusinessPaletteFactory.Action=Action
+BusinessPaletteFactory.RelationshopComment=Create new Relationship
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=Model file loading failed
+BusinessPaletteFactory.DecisionComment=Create new Decision
+BusinessAbstractParser.ValueOfDoubleIsExpected=Value of type Double is expected
+OpenDiagramAction.ReadBusinessModel=Read Business Model
+BusinessInitDiagramFileAction.UnableToLoadResource=Unable to load resource: 
+BusinessPaletteFactory.CreateEllipse=Create new Ellipse
+BusinessNewDiagramFileWizard.DiagramFile=Diagram file
+BusinessAbstractParser.StringShortConverError=String value cannot be converted to Short value
+BusinessPaletteFactory.DocuemntComment=Create new Document
+BusinessAbstractParser.ValueOfIntegerIsExpected=Value of type Integer is expected
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Select diagram root element:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Select semantic model element to be depicted on diagram
+BusinessAbstractParser.StringFloatConvertError=String value cannot be converted to Float value
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String value cannot be converted to Byte value
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Initialize new Ecore diagram file
+BusinessTooltipFigure.assignedMeta={0} assigned Metadata
+DeleteAssignmentAction.DeleteAssignment=Delete Assignment
+BusinessDiagramEditor.canNotSaveTitle=Warning
+BusinessDiagramEditor.canNotSaveMessage=Business Model is not locked by user, can not save.
+BusinessRulersAndGridComposite.Grid_On_Label_Text=Show Grid
+BusinessRulersAndGridComposite.Grid_Level_Label_Text=Grid In Front
+BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=Snap To Grid
+BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=Snap To Shapes
+BusinessRulersAndGridComposite.Ruler_On_Label_Text=Show Ruler
+BusinessRulersAndGridComposite.Ruler_Units_Label_Text=Ruler Units
+BusinessRulersAndGridComposite.Grid_Spacing_Label_Text=Grid Spacing
+BusinessRulersAndGridComposite.Display_Group_Label_Text=Display
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=Measurement
+BusinessRulersAndGridComposite.Gridline_Group_Label_Text=Grid Line
+BusinessRulersAndGridComposite.Line_Color_Label_Text=Color
+BusinessRulersAndGridComposite.Line_Style_Label_Text=Style
+BusinessRulersAndGridComposite.Restore_Defaults_Label_Text=Restore Defaults
+BusinessRulersAndGridComposite.Inches_Label_Text=Inches
+BusinessRulersAndGridComposite.Centimeters_Label_Text=Centimeters
+BusinessRulersAndGridComposite.Pixel_Label_Text=Pixels
+BusinessRulersAndGridComposite.Solid_Label_Text=Solid
+BusinessRulersAndGridComposite.Dash_Label_Text=Dash
+BusinessRulersAndGridComposite.Dot_Label_Text=Dot
+BusinessRulersAndGridComposite.Dash_Dot_Label_Text=Dash Dot
+BusinessRulersAndGridComposite.Dash_Dot_Dot_Label_Text=Dash Dot Dot
+BusinessRulersAndGridComposite.Spaced_Dot_Label_Text=Spaced Dot

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_es.properties

@@ -0,0 +1,49 @@
+BusinessAbstractParser.ValueOfLongIsExpected=Se esperaba un valor de tipo Long
+BusinessAbstractParser.ValueOfFloatIsExpected=Se esperaba un valor de tipo Float
+BusinessAbstractParser.StringIntegerConvertError=Valor del String no puede ser convertido a Entero
+BusinessAbstractParser.UnknownLiteral=Literal desconocido
+BusinessAbstractParser.StringLongConverError=Valor del String no puede ser convertido a Long
+AssignmentPropertySection.Type=Tipo
+BusinessPaletteFactory.BidirectionalRelationShip=Relaci\u00F3n bidireccional
+BusinessPaletteFactory.CreateDirectionalRelationShip=Crear nueva relaci\u00F3n direccional
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Crear nueva relaci\u00F3n bidireccional
+AssignmentPropertySection.Name=Nombre
+BusinessNewDiagramFileWizard.DiagramRootElement=Elemento de diagrama principal
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=No se ha seleccionado elemento del diagrama principal
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Se esperaba un valor de tipo Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Se esperaba un valor de tipo Character
+BusinessPaletteFactory.ActionComment=Crear nueva acci\u00F3n
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Se esperaba un valor de tipo String
+BusinessInitDiagramFileAction.Error=Error
+BusinessNewDiagramFileWizard.SelectRootElement=Seleccione un elemento del diagrama principal
+BusinessAbstractParser.ValueOfShortIsExpected=Se esperaba un valor de tipo Short
+BusinessPaletteFactory.DatabaseComment=Crear nueva Database
+AssignmentPropertySection.Comment=Comentario
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Se ha seleccionado un elemento del diagrama principal invalido
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Entrada no valida en
+BusinessPaletteFactory.InputComment=Crear nueva Entrada
+BusinessPaletteFactory.Data=Fecha
+BusinessPaletteFactory.Input=Entrada
+BusinessPaletteFactory.List=Lista
+BusinessPaletteFactory.Relationshop=Relaci\u00F3n
+BusinessAbstractParser.ValueOfBooleanIsExpected=Se esperaba un valor de tipo Boolean
+BusinessPaletteFactory.decision=Decision
+BusinessPaletteFactory.Document=Documento
+BusinessPaletteFactory.CreateActor=Crear nuevo actor
+BusinessAbstractParser.StringDoubleConvertError=Valor del String no puede ser convertido a Double
+BusinessPaletteFactory.Actor=Actor
+BusinessPaletteFactory.Database=Base de Datos
+BusinessPaletteFactory.ListComment=Crear nueva Lista
+BusinessPaletteFactory.Action=Acci\u00F3n
+BusinessPaletteFactory.RelationshopComment=Crear nueva relaci\u00F3n
+BusinessAbstractParser.ValueOfDoubleIsExpected=Se esperaba un valor de tipo Double
+BusinessPaletteFactory.CreateEllipse=Crear nueva Elipse
+BusinessNewDiagramFileWizard.DiagramFile=Archivo de diagrama
+BusinessAbstractParser.StringShortConverError=Valor del String no puede ser convertido a Short
+BusinessPaletteFactory.DocuemntComment=Crear nuevo documento
+BusinessAbstractParser.ValueOfIntegerIsExpected=Se esperaba un valor de tipo Integer
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Seleccione un elemento del diagrama principal:
+BusinessAbstractParser.StringFloatConvertError=Valor del String no puede ser convertido a Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Valor del String no puede ser convertido a Byte
+BusinessDiagramEditor.canNotSaveTitle=Advertencia

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_fr.properties

@@ -0,0 +1,103 @@
+BusinessInitDiagramFileAction.DiagramFile=Fichier diagramme
+BusinessAbstractParser.ValueOfLongIsExpected=Une valeur de type Long est attendue
+BusinessAbstractParser.ValueOfFloatIsExpected=Une valeur de type Float est attendue
+BusinessPaletteFactory.DataComment=Cr\u00E9er des nouvelles donn\u00E9es
+CreateDiagramAction.CreateBusinessModel=Cr\u00E9er un Business Model
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Cr\u00E9er un nouveau sch\u00E9ma m\u00E9tier
+BusinessAbstractParser.StringIntegerConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Integer
+SimpleBusinessCreationWizardPage.Title=Nouveau Business Model
+BusinessNewDiagramFileWizard.CreateNewDiagram=Cr\u00E9er un nouveau diagramme bas\u00E9 sur le contenu du mod\u00E8le {0}
+BusinessAbstractParser.UnknownLiteral=Litt\u00E9rale inconnue :
+BusinessAbstractParser.StringLongConverError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Long
+AssignmentPropertySection.DeleteAssignment=Effacer l'affectation.
+AssignmentPropertySection.Type=Type
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u00C9l\u00E9ments de mod\u00E8le de domaine disponibles :
+BusinessPaletteFactory.BidirectionalRelationShip=Relation Bidirectionnelle
+BusinessPaletteFactory.CreateDirectionalRelationShip=Cr\u00E9er une nouvelle relation directionnelle
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Cr\u00E9er une nouvelle relation bidirectionnelle
+AssignmentPropertySection.Name=Nom
+CreateAssignmentCommand.CannotAssign=Impossible d'assigner.
+BusinessNewDiagramFileWizard.DiagramRootElement=\u00C9l\u00E9ment racine du diagramme
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Aucun \u00E9l\u00E9ment racine de diagramme s\u00E9lectionn\u00E9.
+BusinessVisualIDRegistry.ParseError=Impossible d'analyser le type de vue en tant que num\u00E9ro idVisuel 
+OpenDiagramAction.EditBusinessModel=Editer le Business mod\u00E8le
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Une valeur de type Byte est attendue
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Une valeur de type Character est attendue
+BusinessPaletteFactory.ActionComment=Cr\u00E9er une nouvelle action
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Une valeur de type String est attendue
+BusinessInitDiagramFileAction.Error=ERROR
+BusinessNewDiagramFileWizard.SelectRootElement=S\u00E9lectionnez un \u00E9l\u00E9ment racine de diagramme
+RepositoryFactoryProxyLabelProvider.Deleted=(Supprim\u00E9)
+BusinessPaletteFactory.TerminalComment=Cr\u00E9er un nouveau Terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Une valeur de type Short est attendue
+BusinessPaletteFactory.DatabaseComment=Cr\u00E9er une nouvelle base de donn\u00E9es
+AssignmentPropertySection.Comment=Commentaire
+SimpleBusinessCreationWizard.NewBusinessModel=Nouveau Business Model
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Un \u00E9l\u00E9ment racine de diagramme non valide a \u00E9t\u00E9 s\u00E9lectionn\u00E9.
+BusinessInitDiagramFileAction.IntialNew=Initialiser nouveau
+FindAssignmentAction.FindAssignments=Rechercher des affectations
+RepositoryFactoryProxyLabelProvider.NotFound=(Non trouv\u00E9)
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Entr\u00E9e invalide \u00E0
+BusinessPaletteFactory.Gear=Transformation
+BusinessPaletteFactory.InputComment=Cr\u00E9er une nouvelle entr\u00E9e
+BusinessPaletteFactory.Data=Donn\u00E9es
+BusinessPaletteFactory.Ellipse=Ellipse
+BusinessPaletteFactory.Input=Lecture
+BusinessPaletteFactory.List=liste
+BusinessPaletteFactory.Relationshop=Relation
+BusinessAbstractParser.ValueOfBooleanIsExpected=Une valeur de type Boolean est attendue
+BusinessPaletteFactory.decision=D\u00E9cision
+BusinessPaletteFactory.Document=Document
+BusinessModelingAssistantProvider.SelectDomainModelElement=S\u00E9lectionner l'\u00E9l\u00E9ment domaine du mod\u00E8le
+BusinessPaletteFactory.CreateActor=Cr\u00E9er un nouvel acteur
+BusinessAbstractParser.StringDoubleConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Double
+BusinessPaletteFactory.Actor=Acteur
+EditAction.Edit=Modifier
+BusinessCreationWizardPage.CreateBusinessDiagram=Cr\u00E9er un sch\u00E9ma m\u00E9tier
+BusinessPaletteFactory.Database=Source des donn\u00E9es
+BusinessPaletteFactory.ListComment=Cr\u00E9er une nouvelle liste
+BusinessPaletteFactory.DirectionalRelationShip=Relation
+BusinessPaletteFactory.Action=Action
+BusinessPaletteFactory.RelationshopComment=Cr\u00E9er une nouvelle relation
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=Echec de chargement du fichier Model :
+BusinessPaletteFactory.DecisionComment=Cr\u00E9er une nouvelle D\u00E9cision
+BusinessAbstractParser.ValueOfDoubleIsExpected=Une valeur de type Double est attendue
+OpenDiagramAction.ReadBusinessModel=Lire le Business mod\u00E8le
+BusinessInitDiagramFileAction.UnableToLoadResource=Impossible de charger la ressource :
+BusinessPaletteFactory.CreateEllipse=Cr\u00E9er une nouvelle ellipse
+BusinessNewDiagramFileWizard.DiagramFile=Fichier du diagramme
+BusinessAbstractParser.StringShortConverError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Short
+BusinessPaletteFactory.DocuemntComment=Cr\u00E9er un nouveau document
+BusinessAbstractParser.ValueOfIntegerIsExpected=Une valeur de type Integer est attendue
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=S\u00E9lectionner un \u00E9l\u00E9ment racine de diagramme :
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=S\u00E9lectionnez un \u00E9l\u00E9ment mod\u00E8le s\u00E9mantique \u00E0 repr\u00E9senter dans le diagramme
+BusinessAbstractParser.StringFloatConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Initialiser un nouveau fichier diagramme Ecore
+BusinessTooltipFigure.assignedMeta={0} M\u00E9tadonn\u00E9e affect\u00E9e
+DeleteAssignmentAction.DeleteAssignment=Effacer l'affectation
+BusinessDiagramEditor.canNotSaveTitle=Avertissement
+BusinessRulersAndGridComposite.Grid_On_Label_Text=Show Grid
+BusinessRulersAndGridComposite.Grid_Level_Label_Text=Grid In Front
+BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=Snap To Grid
+BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=Snap To Shapes
+BusinessRulersAndGridComposite.Ruler_On_Label_Text=Show Ruler
+BusinessRulersAndGridComposite.Ruler_Units_Label_Text=Ruler Units
+BusinessRulersAndGridComposite.Grid_Spacing_Label_Text=Grid Spacing
+BusinessRulersAndGridComposite.Display_Group_Label_Text=Display
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=Mesure
+BusinessRulersAndGridComposite.Gridline_Group_Label_Text=Grid Line
+BusinessRulersAndGridComposite.Line_Color_Label_Text=Color
+BusinessRulersAndGridComposite.Line_Style_Label_Text=Style
+BusinessRulersAndGridComposite.Restore_Defaults_Label_Text=Restore Defaults
+BusinessRulersAndGridComposite.Inches_Label_Text=Inches
+BusinessRulersAndGridComposite.Centimeters_Label_Text=Centimeters
+BusinessRulersAndGridComposite.Pixel_Label_Text=Pixels
+BusinessRulersAndGridComposite.Solid_Label_Text=Solid
+BusinessRulersAndGridComposite.Dash_Label_Text=Tiret
+BusinessRulersAndGridComposite.Dot_Label_Text=Dot
+BusinessRulersAndGridComposite.Dash_Dot_Label_Text=Dash Dot
+BusinessRulersAndGridComposite.Dash_Dot_Dot_Label_Text=Dash Dot Dot
+BusinessRulersAndGridComposite.Spaced_Dot_Label_Text=Spaced Dot

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_hr.properties

@@ -0,0 +1,67 @@
+BusinessInitDiagramFileAction.DiagramFile=datoteka s dijagramom
+BusinessAbstractParser.ValueOfLongIsExpected=O\u010Dekuje se vrijednost tipa Long
+BusinessAbstractParser.ValueOfFloatIsExpected=O\u010Dekuje se vrijednost tipa Float
+BusinessPaletteFactory.DataComment=Kreiraj nove podatke
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Kreiraj novi poslovni dijagram.
+BusinessAbstractParser.StringIntegerConvertError=String nije mogu\u0107e konvertirati u Integer
+BusinessPaletteFactory.CreateGear=Kreiraj novi Gear
+BusinessNewDiagramFileWizard.CreateNewDiagram=Kreiraj novi dijagram na temelju sadr\u017Eaja modela {0}
+BusinessAbstractParser.UnknownLiteral=Nepoznat navod:
+BusinessAbstractParser.StringLongConverError=String nije mogu\u0107e konvertirati u Long
+AssignmentPropertySection.DeleteAssignment=Izbri\u0161i pridru\u017Eivanje
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Raspolo\u017Eivi elementi domenskog modela:
+BusinessPaletteFactory.BidirectionalRelationShip=Bidirekcijska veza
+BusinessPaletteFactory.CreateDirectionalRelationShip=Kreiraj novu direkcijsku vezu
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Kreiraj novu bidirekcijsku vezu
+AssignmentPropertySection.Name=Ime
+CreateAssignmentCommand.CannotAssign=Ne mogu pridru\u017Eiti.
+BusinessNewDiagramFileWizard.DiagramRootElement=Korjenski element dijagrama
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Nije odabran korjenski element dijagrama
+BusinessAbstractParser.ValueOfTypeByteIsExpected=O\u010Dekuje se vrijednost tipa Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=O\u010Dekuje se vrijednost tipa Character
+BusinessPaletteFactory.ActionComment=Kreiraj novu aktivnost
+BusinessAbstractParser.ValueOfTypeStringIsExpected=O\u010Dekuje se vrijednost tipa String
+BusinessInitDiagramFileAction.Error=Gre\u0161ka
+BusinessNewDiagramFileWizard.SelectRootElement=Odaberi korjenski element dijagrama
+BusinessPaletteFactory.TerminalComment=Kreiraj novi terminal
+BusinessAbstractParser.ValueOfShortIsExpected=O\u010Dekuje se vrijednost tipa Short
+BusinessPaletteFactory.DatabaseComment=Kreiraj novu bazu podataka
+AssignmentPropertySection.Comment=Komentar
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Odabra je neispravan korjenski element dijagrama
+BusinessInitDiagramFileAction.IntialNew=Inicijaliziraj novi
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Pogre\u0161an unos na
+BusinessPaletteFactory.Gear=Gear
+BusinessPaletteFactory.InputComment=Kreiraj novi unos
+BusinessPaletteFactory.Data=Podaci
+BusinessPaletteFactory.Input=Unos
+BusinessPaletteFactory.Relationshop=Veza
+BusinessAbstractParser.ValueOfBooleanIsExpected=O\u010Dekuje se vrijednost tipa Boolean
+BusinessPaletteFactory.decision=Odluka
+BusinessPaletteFactory.Document=Dokument
+BusinessModelingAssistantProvider.SelectDomainModelElement=Odaberi element domenskog modela
+BusinessPaletteFactory.CreateActor=Kreiraj novog aktera
+BusinessAbstractParser.StringDoubleConvertError=String nije mogu\u0107e konvertirati u Double
+BusinessPaletteFactory.Actor=Akter
+BusinessCreationWizardPage.CreateBusinessDiagram=Kreiraj poslovni dijagram
+BusinessPaletteFactory.Database=Izvor podataka
+BusinessPaletteFactory.ListComment=Kreiraj novu listu
+BusinessPaletteFactory.DirectionalRelationShip=Direkcijska veza
+BusinessPaletteFactory.Action=Aktivnost
+BusinessPaletteFactory.RelationshopComment=Kreiraj novu vezu
+BusinessInitDiagramFileAction.LoadFaild=U\u010Ditavanje datoteke za Model nije uspjelo
+BusinessPaletteFactory.DecisionComment=Kreiraj novu odluku
+BusinessAbstractParser.ValueOfDoubleIsExpected=O\u010Dekuje se vrijednost tipa Double
+BusinessInitDiagramFileAction.UnableToLoadResource=Ne mogu u\u010Ditati resurse:
+BusinessPaletteFactory.CreateEllipse=Kreiraj novi Ellipse
+BusinessNewDiagramFileWizard.DiagramFile=Datoteka dijagrama
+BusinessAbstractParser.StringShortConverError=String nije mogu\u0107e konvertirati u Short
+BusinessPaletteFactory.DocuemntComment=Kreiraj novi dokument
+BusinessAbstractParser.ValueOfIntegerIsExpected=O\u010Dekuje se vrijednost tipa integer
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Odaberi korjenski element dijagrama:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Prikazati ozna\u010Deni element semanti\u010Dkog modela na dijagramu
+BusinessAbstractParser.StringFloatConvertError=String nije mogu\u0107e konvertirati u Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String nije mogu\u0107e konvertirati u Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Inicijaliziranje nove datoteke za  Ecore dijagram
+DeleteAssignmentAction.DeleteAssignment=Izbri\u0161i pridru\u017Eivanje
+BusinessDiagramEditor.canNotSaveTitle=Upozorenje

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_it.properties

@@ -0,0 +1,79 @@
+BusinessInitDiagramFileAction.DiagramFile=File diagramma
+BusinessAbstractParser.ValueOfLongIsExpected=Previsto valore di tipo Long
+BusinessAbstractParser.ValueOfFloatIsExpected=E atteso un valore di tipo Float
+BusinessPaletteFactory.DataComment=Creare nuovo Dato
+CreateDiagramAction.CreateBusinessModel=Creare modello Business
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Crea diagramma Business
+BusinessAbstractParser.StringIntegerConvertError=Valore String non convertito in valore Integer
+BusinessPaletteFactory.CreateGear=Creare nuova trasformazione
+SimpleBusinessCreationWizardPage.Title=Nuovo modello Business
+BusinessNewDiagramFileWizard.CreateNewDiagram=Creare un nuovo diagramma basato sul contenuto del modello {0}
+BusinessAbstractParser.UnknownLiteral=Letterale sconosciuto:
+BusinessAbstractParser.StringLongConverError=Valore String non convertito in valore Long
+AssignmentPropertySection.DeleteAssignment=Elimina Assegnazione
+AssignmentPropertySection.Type=Tipo
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Elementi disponibili di modello dominio:
+BusinessPaletteFactory.BidirectionalRelationShip=Relazione bidirezionale
+BusinessPaletteFactory.CreateDirectionalRelationShip=Creare uno nuova relazione
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Crea una nuova relazione bidirezionale
+AssignmentPropertySection.Name=Nome
+CreateAssignmentCommand.CannotAssign=Non pu\u00F2 essere assegnato.
+BusinessNewDiagramFileWizard.DiagramRootElement=Elemento radice del diagramma
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Nessun elemento base di diagramma selezionato
+BusinessVisualIDRegistry.ParseError=Impossibile analizzare la vista come un tipo numero visualID:
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Previsto valore di tipo Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Previsto valore di tipo Carattere
+BusinessPaletteFactory.ActionComment=Creare nuova Azione
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Previsto valore di tipo Stringa
+BusinessInitDiagramFileAction.Error=Errore
+BusinessNewDiagramFileWizard.SelectRootElement=Selezionare elemento principale diagramma
+RepositoryFactoryProxyLabelProvider.Deleted=(Cancellato)
+BusinessPaletteFactory.TerminalComment=Crea un nuovo terminale
+BusinessAbstractParser.ValueOfShortIsExpected=Previsto valore di tipo Short
+BusinessPaletteFactory.DatabaseComment=Crea una nuova banca dati
+AssignmentPropertySection.Comment=Commento
+SimpleBusinessCreationWizard.NewBusinessModel=Nuovo modello Business
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u00C8 stato selezionato un elemento principale non valido.
+BusinessInitDiagramFileAction.IntialNew=Nuova inizializzazione
+RepositoryFactoryProxyLabelProvider.NotFound=(Non trovato)
+BusinessPaletteFactory.Terminal=Terminale
+BusinessAbstractParser.InvalidInputAt=Input non valido
+BusinessPaletteFactory.Gear=Transformazione
+BusinessPaletteFactory.InputComment=Crea un nouvo Input
+BusinessPaletteFactory.Data=Dato
+BusinessPaletteFactory.Ellipse=Ellisse
+BusinessPaletteFactory.Input=Input
+BusinessPaletteFactory.List=Lista
+BusinessPaletteFactory.Relationshop=Relazione
+BusinessAbstractParser.ValueOfBooleanIsExpected=Valore atteso di tipo Boolean
+BusinessPaletteFactory.decision=Decisione
+BusinessPaletteFactory.Document=Documento
+BusinessModelingAssistantProvider.SelectDomainModelElement=Selezionare il modello di dominio elemento
+BusinessPaletteFactory.CreateActor=Crea un nuovo attore
+BusinessAbstractParser.StringDoubleConvertError=Valore String non convertito in valore Double
+BusinessPaletteFactory.Actor=Attore
+EditAction.Edit=Modificare
+BusinessCreationWizardPage.CreateBusinessDiagram=Crea diagramma Business.
+BusinessPaletteFactory.Database=Database
+BusinessPaletteFactory.ListComment=Crea una nuova lista
+BusinessPaletteFactory.DirectionalRelationShip=Relazione Direzionale
+BusinessPaletteFactory.Action=Azione
+BusinessPaletteFactory.RelationshopComment=Crea una nuova relazione
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=Impossibile di caricare la risorsa:
+BusinessPaletteFactory.DecisionComment=Creare nuova Decisione
+BusinessAbstractParser.ValueOfDoubleIsExpected=E atteso un valore di tipo Double
+BusinessInitDiagramFileAction.UnableToLoadResource=Impossibile di caricare la risorsa:
+BusinessPaletteFactory.CreateEllipse=Crea un nuovo ellisse
+BusinessNewDiagramFileWizard.DiagramFile=File diagramma
+BusinessAbstractParser.StringShortConverError=Valore String non convertito in valore Short
+BusinessPaletteFactory.DocuemntComment=Creare un nuovo documento
+BusinessAbstractParser.ValueOfIntegerIsExpected=Previsto valore di tipo Intero
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Selezionare elemento principale diagramma:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\r\nSeleziona l'elemento modello semantico da raffigurare nel diagramma
+BusinessAbstractParser.StringFloatConvertError=Valore String non convertito in valore Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Valore String non convertito in valore Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Inizializzare un nuovo file di diagramma Ecore
+BusinessTooltipFigure.assignedMeta={0} Metadati assegnati
+DeleteAssignmentAction.DeleteAssignment=Elimina Assegnazione
+BusinessDiagramEditor.canNotSaveTitle=Avvertimento

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ja.properties

@@ -0,0 +1,105 @@
+BusinessInitDiagramFileAction.DiagramFile=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0 \u30D5\u30A1\u30A4\u30EB
+BusinessAbstractParser.ValueOfLongIsExpected=Long \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessAbstractParser.ValueOfFloatIsExpected=Float \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.DataComment=\u65B0\u898F\u30C7\u30FC\u30BF\u306E\u4F5C\u6210
+CreateDiagramAction.CreateBusinessModel=\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3\u306E\u4F5C\u6210
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9 \u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u306E\u4F5C\u6210
+BusinessAbstractParser.StringIntegerConvertError=String \u5024\u3092 Integer \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.CreateGear=\u65B0\u898F\u6B6F\u8ECA\u306E\u4F5C\u6210
+SimpleBusinessCreationWizardPage.Title=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3
+BusinessNewDiagramFileWizard.CreateNewDiagram={0} \u30E2\u30C7\u30EB\u30B3\u30F3\u30C6\u30F3\u30C4\u306B\u57FA\u3065\u3044\u305F\u65B0\u898F\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u3092\u4F5C\u6210
+BusinessAbstractParser.UnknownLiteral=\u4E0D\u660E\u306A\u30EA\u30C6\u30E9\u30EB :
+BusinessAbstractParser.StringLongConverError=String \u5024\u3092 Long \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+AssignmentPropertySection.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664
+AssignmentPropertySection.Type=\u30BF\u30A4\u30D7
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u4F7F\u7528\u53EF\u80FD\u306A\u30C9\u30E1\u30A4\u30F3\u30E2\u30C7\u30EB\u30A8\u30EC\u30E1\u30F3\u30C8:
+BusinessPaletteFactory.BidirectionalRelationShip=\u53CC\u65B9\u5411\u95A2\u4FC2
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u65B0\u898F\u578B\u65B9\u5411\u95A2\u4FC2\u306E\u4F5C\u6210
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u65B0\u898F\u53CC\u65B9\u5411\u95A2\u4FC2\u306E\u4F5C\u6210
+AssignmentPropertySection.Name=\u540D\u524D
+CreateAssignmentCommand.CannotAssign=\u5272\u308A\u5F53\u3066\u3089\u308C\u307E\u305B\u3093\u3002
+BusinessNewDiagramFileWizard.DiagramRootElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30EB\u30FC\u30C8\u30A8\u30EC\u30E1\u30F3\u30C8
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0 \u30EB\u30FC\u30C8 \u8981\u7D20\u304C\u9078\u629E\u3055\u308C\u3066\u3044\u307E\u305B\u3093
+BusinessVisualIDRegistry.ParseError=visualID \u756A\u53F7\u3068\u3057\u3066\u30D3\u30E5\u30FC\u30BF\u30A4\u30D7\u3092\u89E3\u6790\u3067\u304D\u307E\u305B\u3093\u3067\u3057\u305F :
+OpenDiagramAction.EditBusinessModel=\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3\u306E\u7DE8\u96C6
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Byte \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Character \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.ActionComment=\u65B0\u898F\u30A2\u30AF\u30B7\u30E7\u30F3\u306E\u4F5C\u6210
+BusinessAbstractParser.ValueOfTypeStringIsExpected=String \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessInitDiagramFileAction.Error=\u30A8\u30E9\u30FC
+BusinessNewDiagramFileWizard.SelectRootElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30EB\u30FC\u30C8\u30A8\u30EC\u30E1\u30F3\u30C8\u306E\u9078\u629E
+RepositoryFactoryProxyLabelProvider.Deleted=(\u524A\u9664\u6E08)
+BusinessPaletteFactory.TerminalComment=\u65B0\u898F\u7AEF\u672B\u306E\u4F5C\u6210
+BusinessAbstractParser.ValueOfShortIsExpected=Short \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.DatabaseComment=\u65B0\u898F\u30C7\u30FC\u30BF\u30D9\u30FC\u30B9\u306E\u4F5C\u6210
+AssignmentPropertySection.Comment=\u30B3\u30E1\u30F3\u30C8
+SimpleBusinessCreationWizard.NewBusinessModel=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u7121\u52B9\u306A\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0 \u30EB\u30FC\u30C8\u8981\u7D20\u304C\u9078\u629E\u3055\u308C\u307E\u3057\u305F
+BusinessInitDiagramFileAction.IntialNew=\u521D\u671F\u5316
+FindAssignmentAction.FindAssignments=\u5272\u308A\u5F53\u3066\u306E\u691C\u7D22
+RepositoryFactoryProxyLabelProvider.NotFound=(\u898B\u3064\u304B\u308A\u307E\u305B\u3093)
+BusinessPaletteFactory.Terminal=\u7AEF\u672B
+BusinessAbstractParser.InvalidInputAt=\u7121\u52B9\u306A\u5165\u529B :
+BusinessPaletteFactory.Gear=\u6B6F\u8ECA
+BusinessPaletteFactory.InputComment=\u65B0\u898F\u5165\u529B\u306E\u4F5C\u6210
+BusinessPaletteFactory.Data=\u30C7\u30FC\u30BF
+BusinessPaletteFactory.Ellipse=\u6955\u5186
+BusinessPaletteFactory.Input=Input (\u5165\u529B)
+BusinessPaletteFactory.List=\u30EA\u30B9\u30C8
+BusinessPaletteFactory.Relationshop=\u95A2\u4FC2
+BusinessAbstractParser.ValueOfBooleanIsExpected=Boolean \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.decision=\u5224\u5B9A
+BusinessPaletteFactory.Document=Document (\u30C9\u30AD\u30E5\u30E1\u30F3\u30C8)
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u30C9\u30E1\u30A4\u30F3\u30E2\u30C7\u30EB\u30A8\u30EC\u30E1\u30F3\u30C8\u306E\u9078\u629E
+BusinessPaletteFactory.CreateActor=\u65B0\u898F\u64CD\u4F5C\u8005\u306E\u4F5C\u6210
+BusinessAbstractParser.StringDoubleConvertError=String \u5024\u3092 Double \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.Actor=\u64CD\u4F5C\u8005
+EditAction.Edit=\u7DE8\u96C6
+BusinessCreationWizardPage.CreateBusinessDiagram=\u30D3\u30B8\u30CD\u30B9 \u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u306E\u4F5C\u6210
+BusinessPaletteFactory.Database=\u30C7\u30FC\u30BF\u30BD\u30FC\u30B9
+BusinessPaletteFactory.ListComment=\u65B0\u898F\u30EA\u30B9\u30C8\u306E\u4F5C\u6210
+BusinessPaletteFactory.DirectionalRelationShip=\u7247\u65B9\u5411\u95A2\u4FC2
+BusinessPaletteFactory.Action=\u30A2\u30AF\u30B7\u30E7\u30F3
+BusinessPaletteFactory.RelationshopComment=\u65B0\u898F\u95A2\u4FC2\u306E\u4F5C\u6210
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=\u30E2\u30C7\u30EB\u30D5\u30A1\u30A4\u30EB\u306E\u30ED\u30FC\u30C7\u30A3\u30F3\u30B0\u306B\u5931\u6557\u3057\u307E\u3057\u305F
+BusinessPaletteFactory.DecisionComment=\u65B0\u898F\u5224\u5B9A\u306E\u4F5C\u6210
+BusinessAbstractParser.ValueOfDoubleIsExpected=Double \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+OpenDiagramAction.ReadBusinessModel=\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u56F3\u306E\u8AAD\u8FBC\u307F
+BusinessInitDiagramFileAction.UnableToLoadResource=\u30EA\u30BD\u30FC\u30B9\u3092\u30ED\u30FC\u30C9\u3067\u304D\u307E\u305B\u3093 :
+BusinessPaletteFactory.CreateEllipse=\u65B0\u898F\u6955\u5186\u306E\u4F5C\u6210
+BusinessNewDiagramFileWizard.DiagramFile=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30D5\u30A1\u30A4\u30EB
+BusinessAbstractParser.StringShortConverError=String\u5024\u3092Short\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.DocuemntComment=\u65B0\u898F\u30C9\u30AD\u30E5\u30E1\u30F3\u30C8\u306E\u4F5C\u6210
+BusinessAbstractParser.ValueOfIntegerIsExpected=Integer \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30EB\u30FC\u30C8\u30A8\u30EC\u30E1\u30F3\u30C8\u306E\u9078\u629E:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u306B\u8868\u3059\u30BB\u30DE\u30F3\u30C6\u30A3\u30C3\u30AF\u30E2\u30C7\u30EB\u30A8\u30EC\u30E1\u30F3\u30C8\u3092\u9078\u629E
+BusinessAbstractParser.StringFloatConvertError=String\u5024\u3092Float\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String\u5024\u3092Byte\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u65B0\u898F Ecore \u30C0\u30A4\u30A2\u30B0\u30E9\u30E0 \u30D5\u30A1\u30A4\u30EB\u306E\u521D\u671F\u5316
+BusinessTooltipFigure.assignedMeta=\u5272\u308A\u5F53\u3066\u3089\u308C\u305F\u30E1\u30BF\u30C7\u30FC\u30BF {0}
+DeleteAssignmentAction.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664
+BusinessDiagramEditor.canNotSaveTitle=\u8B66\u544A
+BusinessDiagramEditor.canNotSaveMessage=\u4ED6\u306E\u30E6\u30FC\u30B6\u304C\u64CD\u4F5C\u4E2D\u306E\u305F\u3081\u3001\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u3092\u4FDD\u5B58\u3067\u304D\u307E\u305B\u3093\u3002
+BusinessRulersAndGridComposite.Grid_On_Label_Text=\u30B0\u30EA\u30C3\u30C9\u306E\u8868\u793A
+BusinessRulersAndGridComposite.Grid_Level_Label_Text=\u30B0\u30EA\u30C3\u30C9\u3092\u524D\u3078
+BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=\u30B0\u30EA\u30C3\u30C9\u306B\u30B9\u30CA\u30C3\u30D7
+BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=\u30B7\u30A7\u30A4\u30D7\u306B\u30B9\u30CA\u30C3\u30D7
+BusinessRulersAndGridComposite.Ruler_On_Label_Text=\u30EB\u30FC\u30E9\u30FC\u3092\u8868\u793A
+BusinessRulersAndGridComposite.Ruler_Units_Label_Text=\u30EB\u30FC\u30E9\u30FC\u30E6\u30CB\u30C3\u30C8
+BusinessRulersAndGridComposite.Grid_Spacing_Label_Text=\u30B0\u30EA\u30C3\u30C9\u306E\u9593\u9694
+BusinessRulersAndGridComposite.Display_Group_Label_Text=\u30C7\u30A3\u30B9\u30D7\u30EC\u30A4
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=\u5358\u4F4D
+BusinessRulersAndGridComposite.Gridline_Group_Label_Text=\u30B0\u30EA\u30C3\u30C9\u7DDA
+BusinessRulersAndGridComposite.Line_Color_Label_Text=\u8272
+BusinessRulersAndGridComposite.Line_Style_Label_Text=\u30B9\u30BF\u30A4\u30EB
+BusinessRulersAndGridComposite.Restore_Defaults_Label_Text=\u30C7\u30D5\u30A9\u30EB\u30C8\u306E\u5FA9\u5143
+BusinessRulersAndGridComposite.Inches_Label_Text=\u30A4\u30F3\u30C1
+BusinessRulersAndGridComposite.Centimeters_Label_Text=\u30BB\u30F3\u30C1\u30E1\u30FC\u30C8\u30EB
+BusinessRulersAndGridComposite.Pixel_Label_Text=\u30D4\u30AF\u30BB\u30EB
+BusinessRulersAndGridComposite.Solid_Label_Text=\u30BD\u30EA\u30C3\u30C9
+BusinessRulersAndGridComposite.Dash_Label_Text=Dash
+BusinessRulersAndGridComposite.Dot_Label_Text=Dot
+BusinessRulersAndGridComposite.Dash_Dot_Label_Text=Dash Dot
+BusinessRulersAndGridComposite.Dash_Dot_Dot_Label_Text=Dash Dot Dot
+BusinessRulersAndGridComposite.Spaced_Dot_Label_Text=Spaced Dot

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_jp.properties

@@ -0,0 +1,85 @@
+BusinessInitDiagramFileAction.DiagramFile=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30D5\u30A1\u30A4\u30EB
+BusinessAbstractParser.ValueOfLongIsExpected=Long \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessAbstractParser.ValueOfFloatIsExpected=Float \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.DataComment=\u65B0\u3057\u3044\u30C7\u30FC\u30BF\u4F5C\u6210
+CreateDiagramAction.CreateBusinessModel=\u30d3\u30b8\u30cd\u30b9\u30e2\u30c7\u30eb\u306e\u4f5c\u6210
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0
+BusinessAbstractParser.StringIntegerConvertError=String \u5024\u3092 Integer \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.CreateGear=\u65B0\u3057\u3044\u6B6F\u8ECA\u4F5C\u6210
+SimpleBusinessCreationWizardPage.Title=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB
+BusinessNewDiagramFileWizard.CreateNewDiagram={0}\u30E2\u30C7\u30EB\u30B3\u30F3\u30C6\u30F3\u30C4\u306B\u57FA\u3065\u3044\u305F\u65B0\u898F\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u3092\u4F5C\u6210
+BusinessAbstractParser.UnknownLiteral=\u4E0D\u660E\u306A\u30EA\u30C6\u30E9\u30EB:
+BusinessAbstractParser.StringLongConverError=String \u5024\u3092 Long \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+AssignmentPropertySection.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664
+AssignmentPropertySection.Type=\u30BF\u30A4\u30D7
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u5229\u7528\u53ef\u80fd\u306a\u30c9\u30e1\u30a4\u30f3\u30e2\u30c7\u30eb\u30a8\u30ec\u30e1\u30f3\u30c8:
+BusinessPaletteFactory.BidirectionalRelationShip=\u53CC\u65B9\u5411\u95A2\u4FC2
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u65B0\u3057\u3044\u7247\u65B9\u5411\u95A2\u4FC2\u4F5C\u6210
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u65B0\u3057\u3044\u53CC\u65B9\u5411\u95A2\u4FC2\u4F5C\u6210
+AssignmentPropertySection.Name=\u540D\u524D
+CreateAssignmentCommand.CannotAssign=\u5272\u308A\u5F53\u3066\u3089\u308C\u307E\u305B\u3093\u3002
+BusinessNewDiagramFileWizard.DiagramRootElement=\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u30eb\u30fc\u30c8\u30a8\u30ec\u30e1\u30f3\u30c8
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u30eb\u30fc\u30c8\u30a8\u30ec\u30e1\u30f3\u30c8\u304c\u9078\u629e\u3055\u308c\u3066\u3044\u307e\u305b\u3093
+BusinessVisualIDRegistry.ParseError=visualID\u756A\u53F7\u3068\u3057\u3066\u30D3\u30E5\u30FC\u30BF\u30A4\u30D7\u3092\u89E3\u91C8\u51FA\u6765\u307E\u305B\u3093
+OpenDiagramAction.EditBusinessModel=\u30d3\u30b8\u30cd\u30b9\u30e2\u30c7\u30eb\u306e\u7de8\u96c6
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Byte \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Character \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.ActionComment=\u65B0\u3057\u3044\u30A2\u30AF\u30B7\u30E7\u30F3\u4F5C\u6210
+BusinessAbstractParser.ValueOfTypeStringIsExpected=String \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessInitDiagramFileAction.Error=\u30A8\u30E9\u30FC
+BusinessNewDiagramFileWizard.SelectRootElement=\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u30eb\u30fc\u30c8\u30a8\u30ec\u30e1\u30f3\u30c8\u3092\u9078\u629e
+RepositoryFactoryProxyLabelProvider.Deleted=\uFF08\u524A\u9664\u6E08\uFF09
+BusinessPaletteFactory.TerminalComment=\u65B0\u3057\u3044\u30BF\u30FC\u30DF\u30CA\u30EB\u3092\u4F5C\u6210
+BusinessAbstractParser.ValueOfShortIsExpected=Short \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.DatabaseComment=\u65B0\u3057\u3044\u30C7\u30FC\u30BF\u30D9\u30FC\u30B9\u4F5C\u6210
+AssignmentPropertySection.Comment=\u30B3\u30E1\u30F3\u30C8
+SimpleBusinessCreationWizard.NewBusinessModel=\u65B0\u898F\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u7121\u52b9\u306a\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u30eb\u30fc\u30c8\u30a8\u30ec\u30e1\u30f3\u30c8\u304c\u9078\u629e\u3055\u308c\u307e\u3057\u305f
+BusinessInitDiagramFileAction.IntialNew=\u521D\u671F\u5316
+FindAssignmentAction.FindAssignments=\u5272\u308A\u5F53\u3066\u3092\u63A2\u3059
+AssignmentPropertySection.Edit=\u7DE8\u96C6\uFF08&E\uFF09
+RepositoryFactoryProxyLabelProvider.NotFound=\uFF08\u898B\u3064\u304B\u3089\u306A\u3044\uFF09
+BusinessPaletteFactory.Terminal=\u30BF\u30FC\u30DF\u30CA\u30EB
+BusinessAbstractParser.InvalidInputAt=\u7121\u52B9\u306A\u5165\u529B
+BusinessPaletteFactory.Gear=\u6B6F\u8ECA
+BusinessPaletteFactory.InputComment=\u65B0\u3057\u3044\u5165\u529B\u4F5C\u6210
+BusinessPaletteFactory.Data=\u30C7\u30FC\u30BF
+BusinessPaletteFactory.Ellipse=\u6955\u5186
+BusinessPaletteFactory.Input=\u5165\u529B
+BusinessPaletteFactory.List=\u30EA\u30B9\u30C8
+BusinessPaletteFactory.Relationshop=\u30EA\u30EC\u30FC\u30B7\u30E7\u30F3
+BusinessAbstractParser.ValueOfBooleanIsExpected=Boolean \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessPaletteFactory.Business=\u30D3\u30B8\u30CD\u30B9
+BusinessPaletteFactory.decision=\u30C7\u30B7\u30B8\u30E7\u30F3
+BusinessPaletteFactory.Document=\u30C9\u30AD\u30E5\u30E1\u30F3\u30C8
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u30c9\u30e1\u30a4\u30f3\u30e2\u30c7\u30eb\u30a8\u30ec\u30e1\u30f3\u30c8\u306e\u9078\u629e
+BusinessPaletteFactory.CreateActor=\u65b0\u3057\u3044\u30a2\u30af\u30bf\u4f5c\u6210
+BusinessAbstractParser.StringDoubleConvertError=String \u5024\u3092 Double \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.Actor=\u30a2\u30af\u30bf
+EditAction.Edit=\u7DE8\u96C6
+BusinessCreationWizardPage.CreateBusinessDiagram=\u30D3\u30B8\u30CD\u30B9\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u4F5C\u6210
+BusinessPaletteFactory.Database=\u30C7\u30FC\u30BF\u30BD\u30FC\u30B9
+BusinessPaletteFactory.ListComment=\u65B0\u3057\u3044\u30EA\u30B9\u30C8\u4F5C\u6210
+BusinessPaletteFactory.DirectionalRelationShip=\u5358\u65B9\u5411\u95A2\u4FC2
+BusinessPaletteFactory.Action=\u30A2\u30AF\u30B7\u30E7\u30F3
+BusinessPaletteFactory.RelationshopComment=\u65B0\u3057\u3044\u30EA\u30EC\u30FC\u30B7\u30E7\u30F3\u3092\u4F5C\u6210
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=\u30E2\u30C7\u30EB\u30D5\u30A1\u30A4\u30EB\u306E\u30ED\u30FC\u30C9\u5931\u6557
+BusinessPaletteFactory.DecisionComment=\u65B0\u3057\u3044\u30C7\u30B7\u30B8\u30E7\u30F3\u4F5C\u6210
+BusinessAbstractParser.ValueOfDoubleIsExpected=Double \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+OpenDiagramAction.ReadBusinessModel=\u30d3\u30b8\u30cd\u30b9\u30e2\u30c7\u30eb\u306e\u8aad\u8fbc\u307f
+BusinessInitDiagramFileAction.UnableToLoadResource=\u30EA\u30BD\u30FC\u30B9\u3092\u30ED\u30FC\u30C9\u3067\u304D\u307E\u305B\u3093:
+BusinessPaletteFactory.CreateEllipse=\u65B0\u3057\u3044\u6955\u5186\u4F5C\u6210
+BusinessNewDiagramFileWizard.DiagramFile=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30D5\u30A1\u30A4\u30EB
+BusinessAbstractParser.StringShortConverError=String \u5024\u3092 Short \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessPaletteFactory.DocuemntComment=\u65B0\u3057\u3044\u30C9\u30AD\u30E5\u30E1\u30F3\u30C8\u4F5C\u6210
+BusinessAbstractParser.ValueOfIntegerIsExpected=Integer \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u30eb\u30fc\u30c8\u30a8\u30ec\u30e1\u30f3\u30c8\u3092\u9078\u629e:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u30c0\u30a4\u30a2\u30b0\u30e9\u30e0\u4e0a\u3067\u63cf\u304b\u308c\u308b\u30bb\u30de\u30f3\u30c6\u30c3\u30af\u30e2\u30c7\u30eb\u30a8\u30ec\u30e1\u30f3\u30c8\u306e\u9078\u629e
+BusinessAbstractParser.StringFloatConvertError=String \u5024\u3092 Float \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String \u5024\u3092 Byte \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u65B0\u898FEcore\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30D5\u30A1\u30A4\u30EB\u3092\u521D\u671F\u5316
+BusinessTooltipFigure.assignedMeta=\u30a2\u30b5\u30a4\u30f3\u3055\u308c\u305f\u30e1\u30bf\u30c7\u30fc\u30bf({0})
+DeleteAssignmentAction.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664
+CreateAssignmentCommand.CreateAssignment=\u5272\u5F53\u3092\u4F5C\u6210
+CreateAssignmentCommand.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_kr.properties

@@ -0,0 +1,6 @@
+AssignmentPropertySection.Name=\uC774\uB984
+AssignmentPropertySection.Comment=1rdrhdh
+BusinessPaletteFactory.Data=\uC790\uB8CC
+BusinessPaletteFactory.Input=\uC785\uB825
+BusinessModelingAssistantProvider.SelectDomainModelElement={0}\uBAA8\uB378 \uB0B4\uC6A9\uC5D0 \uAE30\uCD08\uD558\uC5EC \uC0C8\uB85C\uC6B4 \uB2E4\uC774\uC5B4\uADF8\uB7A8 \uC0DD\uC131
+BusinessNewDiagramFileWizard.DiagramFile=\uB2E4\uC774\uC5B4\uADF8\uB7A8 \uD30C\uC77C

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_nl.properties

@@ -0,0 +1,9 @@
+AssignmentPropertySection.Name=Naam
+BusinessPaletteFactory.ActionComment=Nieuwe Aktie
+BusinessInitDiagramFileAction.Error=Fout
+AssignmentPropertySection.Comment=Opmerking
+BusinessPaletteFactory.Data=Data
+BusinessPaletteFactory.Ellipse=Elips
+BusinessPaletteFactory.Document=Document
+BusinessPaletteFactory.Action=Aktie
+BusinessPaletteFactory.DocuemntComment=Nieuw Document

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_pl.properties

@@ -0,0 +1,60 @@
+BusinessInitDiagramFileAction.DiagramFile=plik diagramu
+BusinessAbstractParser.ValueOfLongIsExpected=Spodziewany typ Long
+BusinessAbstractParser.ValueOfFloatIsExpected=Spodziewany typ Float
+BusinessPaletteFactory.DataComment=Utw\u00F3rz nowe dane
+CreateDiagramAction.CreateBusinessModel=Utw\u00F3rz model biznesowy
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Utw\u00F3rz nowy diagram biznesowy
+BusinessAbstractParser.StringIntegerConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Integer
+BusinessNewDiagramFileWizard.CreateNewDiagram=Stw\u00F3rz nowy diagram na podst. {0} zawarto\u015Bci modelu
+BusinessAbstractParser.UnknownLiteral=Nieznany litera\u0142:
+BusinessAbstractParser.StringLongConverError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Long
+AssignmentPropertySection.DeleteAssignment=Skasuj przypisanie
+AssignmentPropertySection.Type=Typ
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Dost\u0119pne elementy modelu domeny:
+AssignmentPropertySection.Name=Nazwa
+CreateAssignmentCommand.CannotAssign=Nie mo\u017Cna przypisa\u0107
+BusinessNewDiagramFileWizard.DiagramRootElement=Element root diagramu
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Spodziewany typ Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Spodziewany typ znakowy
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Spodziewany typ ci\u0105gu znakowego
+BusinessInitDiagramFileAction.Error=B\u0142\u0105d
+BusinessPaletteFactory.TerminalComment=Utw\u00F3rz nowy terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Spodziewany typ Short
+BusinessPaletteFactory.DatabaseComment=Utw\u00F3rz now\u0105 baz\u0119 danych
+AssignmentPropertySection.Comment=Komentarz
+BusinessInitDiagramFileAction.IntialNew=Inicjalizuj nowy
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Niepoprawne wej\u015Bcie w
+BusinessPaletteFactory.Gear=Tryb
+BusinessPaletteFactory.InputComment=Utw\u00F3rz nowe wej\u015Bcie
+BusinessPaletteFactory.Data=Dane
+BusinessPaletteFactory.Ellipse=Elipsa
+BusinessPaletteFactory.Input=Wej\u015Bcie
+BusinessPaletteFactory.Relationshop=Relacja
+BusinessAbstractParser.ValueOfBooleanIsExpected=Spodziewana warto\u015B\u0107 typu logicznego
+BusinessPaletteFactory.decision=Decyzja
+BusinessPaletteFactory.Document=Dokument
+BusinessModelingAssistantProvider.SelectDomainModelElement=Wybierz element modelu domeny
+BusinessPaletteFactory.CreateActor=Utw\u00F3rz aktora
+BusinessAbstractParser.StringDoubleConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Double
+EditAction.Edit=Edycja
+BusinessCreationWizardPage.CreateBusinessDiagram=Utw\u00F3rz diagram biznesowy
+BusinessPaletteFactory.Database=\u0179r\u00F3d\u0142o danych
+BusinessPaletteFactory.ListComment=Utw\u00F3rz now\u0105 list\u0119
+BusinessPaletteFactory.DirectionalRelationShip=Relacja jednokierunkowa
+BusinessPaletteFactory.Action=Akcja
+BusinessPaletteFactory.RelationshopComment=Ustw\u00F3rz now\u0105 relacj\u0119
+BusinessInitDiagramFileAction.LoadFaild=Nie uda\u0142o si\u0119 za\u0142adowa\u0107 pliku modelu
+BusinessPaletteFactory.DecisionComment=Utw\u00F3rz now\u0105 decyzj\u0119
+BusinessAbstractParser.ValueOfDoubleIsExpected=Spodziewana warto\u015B\u0107 typu Double
+BusinessInitDiagramFileAction.UnableToLoadResource=Nie uda\u0142o si\u0119 za\u0142adowa\u0107 zasobu:
+BusinessPaletteFactory.CreateEllipse=Utw\u00F3rz now\u0105 elips\u0119
+BusinessNewDiagramFileWizard.DiagramFile=Plik diagramu
+BusinessAbstractParser.StringShortConverError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Short
+BusinessPaletteFactory.DocuemntComment=Utw\u00F3rz nowy Dokument
+BusinessAbstractParser.ValueOfIntegerIsExpected=Spodziewany typ Integer
+BusinessAbstractParser.StringFloatConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Inicjalizuj nowy plik diagramu Ecore
+DeleteAssignmentAction.DeleteAssignment=Skasuj przypisanie
+BusinessDiagramEditor.canNotSaveTitle=Ostrze\u017Cenie

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_pt_BR.properties

@@ -0,0 +1,67 @@
+BusinessInitDiagramFileAction.DiagramFile=Arquivo de Diagrama
+BusinessAbstractParser.ValueOfLongIsExpected=Valor de tipo Long esperado
+BusinessAbstractParser.ValueOfFloatIsExpected=Valor de tipo Float esperado
+BusinessPaletteFactory.DataComment=Criar novo Dado
+CreateDiagramAction.CreateBusinessModel=Criar modelo de neg\u00F3cio
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Criar um novo diagrama de neg\u00F3cio
+BusinessPaletteFactory.CreateGear=Criar nova Engrenagem
+BusinessNewDiagramFileWizard.CreateNewDiagram=Criar novo diagrama baseado no conte\u00FAdo do modelo {0}
+BusinessAbstractParser.UnknownLiteral=Literal desconhecido:
+AssignmentPropertySection.DeleteAssignment=Apagar Cess\u00E3o
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Elementos do modelo de dom\u00EDnio dispon\u00EDveis
+BusinessPaletteFactory.BidirectionalRelationShip=Relacionamento Bidirecional
+BusinessPaletteFactory.CreateDirectionalRelationShip=Criar novo relacionamento direcional
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Criar novo Relacionamento Bidirecional
+AssignmentPropertySection.Name=Nome
+CreateAssignmentCommand.CannotAssign=N\u00E3o \u00E9 poss\u00EDvel atribuir.
+BusinessNewDiagramFileWizard.DiagramRootElement=Elemento Raiz do Diagrama
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=N\u00E3o ha um Elemento Raiz de Diagrama selecionado
+BusinessVisualIDRegistry.ParseError=Imposs\u00EDvel fazer o parse do 'view type' como um n\u00FAmero visualID:
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Valor do tipo Byte esperado
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Valor do tipo Character esperado
+BusinessPaletteFactory.ActionComment=Criar nova a\u00E7\u00E3o
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Valor do tipo String esperado
+BusinessInitDiagramFileAction.Error=Erro
+BusinessNewDiagramFileWizard.SelectRootElement=Selecione elemento raiz do diagrama
+RepositoryFactoryProxyLabelProvider.Deleted=(Apagado)
+BusinessPaletteFactory.TerminalComment=Criar novo Terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Valor de tipo Short esperado
+BusinessPaletteFactory.DatabaseComment=Criar um novo Banco
+AssignmentPropertySection.Comment=Coment\u00E1rio
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Elemento Raiz inv\u00E1lido do Diagrama foi selecionado
+BusinessInitDiagramFileAction.IntialNew=Iniciar Novo
+RepositoryFactoryProxyLabelProvider.NotFound=(N\u00E3o encontrado)
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Entrada inv\u00E1lida em
+BusinessPaletteFactory.Gear=Engrenagem
+BusinessPaletteFactory.InputComment=Criar nova Entrada
+BusinessPaletteFactory.Data=Dado
+BusinessPaletteFactory.Ellipse=Elipse
+BusinessPaletteFactory.Input=Entrada
+BusinessPaletteFactory.Relationshop=Relacionamento
+BusinessAbstractParser.ValueOfBooleanIsExpected=Valor de tipo Boolean esperado
+BusinessPaletteFactory.decision=Decis\u00E3o
+BusinessPaletteFactory.Document=Documento
+BusinessModelingAssistantProvider.SelectDomainModelElement=Selecione o elemento de modelo de dom\u00EDnio
+BusinessPaletteFactory.CreateActor=Criar novo Ator
+BusinessPaletteFactory.Actor=Ator
+EditAction.Edit=Editar
+BusinessPaletteFactory.Database=Fonte de dados
+BusinessPaletteFactory.ListComment=Criar nova Lista
+BusinessPaletteFactory.DirectionalRelationShip=Relacionamento Direcional
+BusinessPaletteFactory.Action=A\u00E7\u00E3o
+BusinessPaletteFactory.RelationshopComment=Criar novo Relacionamento
+BusinessInitDiagramFileAction.LoadFaild=Falha na carga do arquivo de modelo
+BusinessPaletteFactory.DecisionComment=Criar nova Decis\u00E3o
+BusinessAbstractParser.ValueOfDoubleIsExpected=Valor de tipo Double esperado
+BusinessInitDiagramFileAction.UnableToLoadResource=Imposs\u00EDvel carregar recursos:
+BusinessPaletteFactory.CreateEllipse=Criar nova Elipse
+BusinessNewDiagramFileWizard.DiagramFile=Arquivo de Diagrama
+BusinessPaletteFactory.DocuemntComment=Criar novo Documento
+BusinessAbstractParser.ValueOfIntegerIsExpected=Valor de tipo Inteiro esperado
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Selecione um Elemento Raiz do Diagrama:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Selecione o elemento de modelo de sem\u00E2ntica a ser analisado no diagrama
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Iniciar novo arquivo de Diagrama Ecore
+BusinessTooltipFigure.assignedMeta=Metadados atribuidos \u00E0 {0}
+DeleteAssignmentAction.DeleteAssignment=Apagar Cess\u00E3o
+BusinessDiagramEditor.canNotSaveTitle=Advert\u00EAncia

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ro.properties

@@ -0,0 +1,3 @@
+AssignmentPropertySection.Type=Tip
+AssignmentPropertySection.Name=Nume
+AssignmentPropertySection.Comment=Comentarii

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ru.properties

@@ -0,0 +1,76 @@
+BusinessInitDiagramFileAction.DiagramFile=\u0424\u0430\u0439\u043B \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessAbstractParser.ValueOfLongIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Long
+BusinessAbstractParser.ValueOfFloatIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Float
+BusinessPaletteFactory.DataComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0435 \u0434\u0430\u043D\u043D\u044B\u0435
+CreateDiagramAction.CreateBusinessModel=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u0431\u0438\u0437\u043D\u0435\u0441-\u043C\u043E\u0434\u0435\u043B\u044C
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u0443\u044E \u0431\u0438\u0437\u043D\u0435\u0441 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u0443
+BusinessAbstractParser.StringIntegerConvertError=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u043F\u0440\u0435\u043E\u0431\u0440\u0430\u0437\u043E\u0432\u0430\u043D\u0430 \u0432 Integer
+BusinessPaletteFactory.CreateGear=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 Gear
+SimpleBusinessCreationWizardPage.Title=\u041D\u043E\u0432\u0430\u044F \u0431\u0438\u0437\u043D\u0435\u0441 \u043C\u043E\u0434\u0435\u043B\u044C
+BusinessNewDiagramFileWizard.CreateNewDiagram=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u0443\u044E \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u0443 \u043E\u0441\u043D\u043E\u0432\u044B\u0432\u0430\u044F\u0441\u044C \u043D\u0430 \u0441\u043E\u0434\u0435\u0440\u0436\u0430\u043D\u0438\u0438 \u043C\u043E\u0434\u0435\u043B\u0438 {0}
+BusinessAbstractParser.UnknownLiteral=\u043D\u0435\u0438\u0437\u0432\u0435\u0441\u0442\u043D\u044B\u0439 \u043B\u0438\u0442\u0435\u0440\u0430\u043B
+BusinessAbstractParser.StringLongConverError=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u043F\u0440\u0435\u043E\u0431\u0440\u0430\u0437\u043E\u0432\u0430\u043D\u0430 \u0432 Long
+AssignmentPropertySection.DeleteAssignment=\u0423\u0434\u0430\u043B\u0438\u0442\u044C \u043D\u0430\u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435
+AssignmentPropertySection.Type=\u0422\u0438\u043F
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u0414\u043E\u0441\u0442\u0443\u043F\u043D\u044B\u0435 \u044D\u043B\u0435\u043C\u0435\u043D\u0442\u044B \u043C\u043E\u0434\u0435\u043B\u0438 \u0434\u043E\u043C\u0435\u043D\u0430:
+BusinessPaletteFactory.BidirectionalRelationShip=\u0414\u0432\u0443\u043D\u0430\u043F\u0440\u0430\u0432\u043B\u0435\u043D\u043D\u043E\u0435 \u041E\u0442\u043D\u043E\u0448\u0435\u043D\u0438\u0435
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u0443\u044E \u043E\u0434\u043D\u043E\u043D\u0430\u043F\u0440\u0430\u0432\u043B\u0435\u043D\u043D\u0443\u044E \u0441\u0432\u044F\u0437\u044C
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u0443\u044E \u0434\u0432\u0443\u043D\u0430\u043F\u0440\u0430\u0432\u043B\u0435\u043D\u043D\u0443\u044E \u0441\u0432\u044F\u0437\u044C
+AssignmentPropertySection.Name=\u0418\u043C\u044F
+CreateAssignmentCommand.CannotAssign=\u041D\u0435\u0432\u043E\u0437\u043C\u043E\u0436\u043D\u043E \u043F\u0440\u0438\u0441\u0432\u043E\u0438\u0442\u044C.
+BusinessNewDiagramFileWizard.DiagramRootElement=\u041A\u043E\u0440\u043D\u0435\u0432\u043E\u0439 \u044D\u043B\u0435\u043C\u0435\u043D\u0442 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u041A\u043E\u0440\u043D\u0435\u0432\u043E\u0439 \u044D\u043B\u0435\u043C\u0435\u043D\u0442 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B \u043D\u0435 \u0432\u044B\u0431\u0440\u0430\u043D
+BusinessVisualIDRegistry.ParseError=\u041D\u0435 \u043C\u043E\u0433\u0443 \u0440\u0430\u0437\u043E\u0431\u0440\u0430\u0442\u044C \u0442\u0438\u043F \u0432\u0438\u0434\u0430 \u043A\u0430\u043A \u043D\u043E\u043C\u0435\u0440 VisualID
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Character
+BusinessPaletteFactory.ActionComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u043E\u0435 \u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0435
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u041E\u0436\u0438\u0434\u0430\u043B\u043E\u0441\u044C \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 string
+BusinessInitDiagramFileAction.Error=\u041E\u0448\u0438\u0431\u043A\u0430
+BusinessNewDiagramFileWizard.SelectRootElement=\u0412\u044B\u0431\u0435\u0440\u0438\u0442\u0435 \u043A\u043E\u0440\u043D\u0435\u0432\u043E\u0439 \u044D\u043B\u0435\u043C\u0435\u043D\u0442 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessPaletteFactory.TerminalComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u0442\u0435\u0440\u043C\u0438\u043D\u0430\u043B
+BusinessAbstractParser.ValueOfShortIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Short
+BusinessPaletteFactory.DatabaseComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u0443\u044E \u0411\u0430\u0437\u0443 \u0414\u0430\u043D\u043D\u044B\u0445
+AssignmentPropertySection.Comment=\u041F\u0440\u0438\u043C\u0435\u0447.
+SimpleBusinessCreationWizard.NewBusinessModel=\u041D\u043E\u0432\u0430\u044F \u0431\u0438\u0437\u043D\u0435\u0441 \u043C\u043E\u0434\u0435\u043B\u044C
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u0412\u044B\u0431\u0440\u0430\u043D \u043D\u0435\u0434\u043E\u043F\u0443\u0441\u0442\u0438\u043C\u044B\u0439 \u043A\u043E\u0440\u043D\u0435\u0432\u043E\u0439 \u044D\u043B\u0435\u043C\u0435\u043D\u0442 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessInitDiagramFileAction.IntialNew=\u0418\u043D\u0438\u0446\u0438\u0430\u043B\u0438\u0437\u0438\u0440\u043E\u0432\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439
+BusinessPaletteFactory.Terminal=\u0422\u0435\u0440\u043C\u0438\u043D\u0430\u043B
+BusinessAbstractParser.InvalidInputAt=\u041D\u0435\u0434\u043E\u043F\u0443\u0441\u0442\u0438\u043C\u044B\u0439 \u0432\u0432\u043E\u0434:
+BusinessPaletteFactory.Gear=Gear
+BusinessPaletteFactory.InputComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u0432\u0445\u043E\u0434
+BusinessPaletteFactory.Data=\u0414\u0430\u043D\u043D\u044B\u0435
+BusinessPaletteFactory.Ellipse=\u042D\u043B\u043B\u0438\u043F\u0441
+BusinessPaletteFactory.Input=\u0412\u0445\u043E\u0434
+BusinessPaletteFactory.List=List
+BusinessPaletteFactory.Relationshop=\u041E\u0442\u043D\u043E\u0448\u0435\u043D\u0438\u0435
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Boolean
+BusinessPaletteFactory.decision=\u0420\u0435\u0448\u0435\u043D\u0438\u0435
+BusinessPaletteFactory.Document=\u0414\u043E\u043A\u0443\u043C\u0435\u043D\u0442
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u0412\u044B\u0431\u0435\u0440\u0438\u0442\u0435 \u044D\u043B\u0435\u043C\u0435\u043D\u0442\u044B \u043C\u043E\u0434\u0435\u043B\u0438 \u0434\u043E\u043C\u0435\u043D\u0430
+BusinessPaletteFactory.CreateActor=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 Actor
+BusinessAbstractParser.StringDoubleConvertError=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u0441\u043A\u043E\u043D\u0432\u0435\u0440\u0442\u0438\u0440\u043E\u0432\u0430\u043D\u0430 \u0432 Double
+BusinessPaletteFactory.Actor=\u0410\u043A\u0442\u0435\u0440
+EditAction.Edit=\u0420\u0435\u0434\u0430\u043A\u0442\u0438\u0440\u043E\u0432\u0430\u0442\u044C
+BusinessCreationWizardPage.CreateBusinessDiagram=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u0411\u0438\u0437\u043D\u0435\u0441 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u0443
+BusinessPaletteFactory.Database=\u0418\u0441\u0442\u043E\u0447\u043D\u0438\u043A \u0434\u0430\u043D\u043D\u044B\u0445
+BusinessPaletteFactory.ListComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u0441\u043F\u0438\u0441\u043E\u043A
+BusinessPaletteFactory.DirectionalRelationShip=\u041D\u0430\u043F\u0440\u0430\u0432\u043B\u0435\u043D\u043D\u043E\u0435 \u041E\u0442\u043D\u043E\u0448\u0435\u043D\u0438\u0435
+BusinessPaletteFactory.Action=\u0414\u0435\u0439\u0441\u0442\u0432\u0438\u0435
+BusinessPaletteFactory.RelationshopComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u043E\u0435 \u043E\u0442\u043D\u043E\u0448\u0435\u043D\u0438\u0435
+BusinessInitDiagramFileAction.LoadFaild=\u041E\u0448\u0438\u0431\u043A\u0430 \u043F\u0440\u0438 \u0437\u0430\u0433\u0440\u0443\u0437\u043A\u0435 \u0444\u0430\u0439\u043B\u0430 \u043C\u043E\u0434\u0435\u043B\u0438
+BusinessPaletteFactory.DecisionComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u043E\u0435 \u0440\u0435\u0448\u0435\u043D\u0438\u0435
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Double
+BusinessInitDiagramFileAction.UnableToLoadResource=\u041D\u0435\u0432\u043E\u0437\u043C\u043E\u0436\u043D\u043E \u0437\u0430\u0433\u0440\u0443\u0437\u0438\u0442\u044C \u0440\u0435\u0441\u0443\u0440\u0441:
+BusinessPaletteFactory.CreateEllipse=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u042D\u043B\u043B\u0438\u043F\u0441
+BusinessNewDiagramFileWizard.DiagramFile=\u0424\u0430\u0439\u043B \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessAbstractParser.StringShortConverError=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u043F\u0440\u0435\u043E\u0431\u0440\u0430\u0437\u043E\u0432\u0430\u043D\u0430 \u0432 Short
+BusinessPaletteFactory.DocuemntComment=\u0421\u043E\u0437\u0434\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u0434\u043E\u043A\u0443\u043C\u0435\u043D\u0442
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u041E\u0436\u0438\u0434\u0430\u0435\u0442\u0441\u044F \u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435 \u0442\u0438\u043F\u0430 Integer
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u0412\u044B\u0431\u0435\u0440\u0438\u0442\u0435 \u043A\u043E\u0440\u043D\u0435\u0432\u043E\u0439 \u044D\u043B\u0435\u043C\u0435\u043D\u0442 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u0412\u044B\u0431\u0435\u0440\u0438\u0442\u0435 \u0441\u0435\u043C\u0430\u043D\u0442\u0438\u0447\u0435\u0441\u043A\u0438\u0435 \u044D\u043B\u0435\u043C\u0435\u043D\u0442\u044B \u043C\u043E\u0434\u0435\u043B\u0438 \u0434\u043B\u044F \u0438\u0437\u043E\u0431\u0440\u0430\u0436\u0435\u043D\u0438\u044F \u043D\u0430 \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u0435
+BusinessAbstractParser.StringFloatConvertError=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u0441\u043A\u043E\u043D\u0432\u0435\u0440\u0442\u0438\u0440\u043E\u0432\u0430\u043D\u0430 \u0432 Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=\u0421\u0442\u0440\u043E\u043A\u0430 \u043D\u0435 \u043C\u043E\u0436\u0435\u0442 \u0431\u044B\u0442\u044C \u0441\u043A\u043E\u043D\u0432\u0435\u0440\u0442\u0438\u0440\u043E\u0432\u0430\u043D\u0430 \u0432 Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u0418\u043D\u0438\u0446\u0438\u0430\u043B\u0438\u0437\u0438\u0440\u043E\u0432\u0430\u0442\u044C \u043D\u043E\u0432\u044B\u0439 \u0444\u0430\u0439\u043B \u0434\u0438\u0430\u0433\u0440\u0430\u043C\u043C\u044B Ecore
+BusinessTooltipFigure.assignedMeta={0} \u043F\u0440\u0438\u0441\u0432\u043E\u0435\u043D\u044B \u043C\u0435\u0442\u0430-\u0434\u0430\u043D\u043D\u044B\u0435
+DeleteAssignmentAction.DeleteAssignment=\u0423\u0434\u0430\u043B\u0438\u0442\u044C \u043D\u0430\u0437\u043D\u0430\u0447\u0435\u043D\u0438\u0435
+BusinessDiagramEditor.canNotSaveTitle=\u041F\u0440\u0435\u0434\u0443\u043F\u0440\u0435\u0436\u0434\u0435\u043D\u0438\u0435

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_sk.properties

@@ -0,0 +1,14 @@
+AssignmentPropertySection.Type=Typ
+AssignmentPropertySection.Name=Meno
+BusinessInitDiagramFileAction.Error=CHYBA
+AssignmentPropertySection.Comment=Koment\u00E1r
+BusinessPaletteFactory.Data=D\u00E1ta
+BusinessPaletteFactory.Input=VSTUP
+BusinessPaletteFactory.Relationshop=Vz\u0165ah
+BusinessPaletteFactory.decision=Rozhodnutie
+BusinessPaletteFactory.Document=Dokument
+BusinessPaletteFactory.Database=D\u00E1tov\u00FD zdroj
+BusinessPaletteFactory.Action=Akcia
+BusinessDiagramEditor.canNotSaveTitle=Varovanie
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=Meranie
+BusinessRulersAndGridComposite.Line_Style_Label_Text=\u0160t\u00FDl

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_slk.properties

@@ -0,0 +1,14 @@
+AssignmentPropertySection.Type=Typ
+AssignmentPropertySection.Name=Meno
+BusinessInitDiagramFileAction.Error=CHYBA
+AssignmentPropertySection.Comment=Komentár
+BusinessPaletteFactory.Data=Dáta
+BusinessPaletteFactory.Input=VSTUP
+BusinessPaletteFactory.Relationshop=Vz\u0165ah
+BusinessPaletteFactory.decision=Rozhodnutie
+BusinessPaletteFactory.Document=Dokument
+BusinessPaletteFactory.Database=Dátový zdroj
+BusinessPaletteFactory.Action=Akcia
+BusinessDiagramEditor.canNotSaveTitle=Varovanie
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=Meranie
+BusinessRulersAndGridComposite.Line_Style_Label_Text=\u0160týl

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_sr.properties

@@ -0,0 +1,2 @@
+BusinessInitDiagramFileAction.Error=Gre\u0161ka
+BusinessInitDiagramFileAction.LoadFaild=_

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_swtbot.properties

@@ -0,0 +1,83 @@
+CreateDiagramAction.CreateBusinessModel=Create Business Model
+CreateAssignmentCommand.CannotAssign=Cannot Assign.
+FindAssignmentAction.FindAssignments=Find Assignments
+EditAction.Edit=Edit 
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+SimpleBusinessCreationWizardPage.Title=New Business Model
+SimpleBusinessCreationWizard.NewBusinessModel=New Business Model
+OpenDiagramAction.EditBusinessModel=Edit Business Model
+OpenDiagramAction.ReadBusinessModel=Read Business Model
+DeleteAssignmentAction.DeleteAssignment =Delete Assignment
+AssignmentPropertySection.Type=Type
+AssignmentPropertySection.Name=Name
+AssignmentPropertySection.Comment=Comment
+AssignmentPropertySection.DeleteAssignment=Delete Assignment
+BusinessPaletteFactory.DecisionComment=Create new Decision
+BusinessPaletteFactory.TerminalComment=Create new Terminal
+BusinessPaletteFactory.DocuemntComment=Create new Document
+BusinessPaletteFactory.DatabaseComment=Create new Database
+BusinessInitDiagramFileAction.Error=Error
+BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number: 
+BusinessPaletteFactory.decision=Decision
+BusinessPaletteFactory.Action=Action
+BusinessPaletteFactory.Actor=Actor
+BusinessPaletteFactory.ActionComment=Create new Action
+BusinessPaletteFactory.CreateEllipse=Create new Ellipse
+BusinessAbstractParser.InvalidInputAt=Invalid input at 
+BusinessAbstractParser.UnknownLiteral=Unknown literal: 
+BusinessPaletteFactory.Terminal=Terminal
+BusinessPaletteFactory.DataComment=Create new Data
+BusinessPaletteFactory.Document=Document
+BusinessPaletteFactory.InputComment=Create new Input
+BusinessPaletteFactory.ListComment=Create new List
+BusinessPaletteFactory.CreateActor=Create new Actor
+BusinessPaletteFactory.CreateGear=Create new Gear
+BusinessPaletteFactory.Database=Database
+BusinessPaletteFactory.Ellipse=Ellipse
+BusinessPaletteFactory.Relationshop=Relationship
+BusinessInitDiagramFileAction.LoadFaild=Model file loading failed
+BusinessInitDiagramFileAction.IntialNew=Initialize new 
+BusinessInitDiagramFileAction.DiagramFile=\ diagram file
+BusinessPaletteFactory.RelationshopComment=Create new Relationship
+BusinessPaletteFactory.DirectionalRelationShip=Directional Relationship
+BusinessPaletteFactory.CreateDirectionalRelationShip=Create new Directional Relationship
+BusinessPaletteFactory.BidirectionalRelationShip=Bidirectional Relationship
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Create new Bidirectional Relationship
+BusinessNewDiagramFileWizard.DiagramFile=Diagram file
+BusinessInitDiagramFileAction.UnableToLoadResource=Unable to load resource: 
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Value of type String is expected
+BusinessCreationWizardPage.CreateBusinessDiagram=Create Business Diagram
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Value of type Byte is expected
+BusinessAbstractParser.StringIntegerConvertError=String value does not convert to Integer value
+BusinessNewDiagramFileWizard.CreateNewDiagram=Create new diagram based on {0}  model content
+BusinessAbstractParser.StringShortConverError=String value does not convert to Short value
+BusinessAbstractParser.ValueOfShortIsExpected=Value of type Short is expected
+BusinessAbstractParser.StringLongConverError=String value does not convert to Long value
+BusinessAbstractParser.ValueOfLongIsExpected=Value of type Long is expected
+BusinessAbstractParser.ValueOfFloatIsExpected=Value of type Float is expected
+BusinessNewDiagramFileWizard.SelectRootElement=Select diagram root element
+BusinessAbstractParser.StringFloatConvertError=String value does not convert to Float value
+BusinessAbstractParser.ValueOfDoubleIsExpected=Value of type Double is expected
+BusinessNewDiagramFileWizard.DiagramRootElement=Diagram root element
+BusinessAbstractParser.ValueOfBooleanIsExpected=Value of type Boolean is expected
+BusinessAbstractParser.ValueOfIntegerIsExpected=Value of type Integer is expected
+BusinessAbstractParser.StringDoubleConvertError=String value does not convert to Double value
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Create a new Business diagram.
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Initialize new Ecore diagram file
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Select semantic model element to be depicted on diagram
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Select diagram root element:
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Value of type Character is expected
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=No diagram root element selected
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Invalid diagram root element was selected
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Available domain model elements:
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String value does not convert to Byte value
+BusinessModelingAssistantProvider.SelectDomainModelElement=Select domain model element
+BusinessPaletteFactory.Data=Data
+BusinessPaletteFactory.Input=Input
+BusinessPaletteFactory.List=List
+BusinessPaletteFactory.Gear=Gear
+BusinessTooltipFigure.assignedMeta={0} assigned Metadata
+RepositoryFactoryProxyLabelProvider.NotFound=\ (Not Found)
+RepositoryFactoryProxyLabelProvider.Deleted=\ (Deleted)
+BusinessDiagramEditor.canNotSaveTitle=Warning
+BusinessDiagramEditor.canNotSaveMessage=Business Model is not locked by user, can not save.

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_tr.properties

@@ -0,0 +1,12 @@
+AssignmentPropertySection.Type=Tip
+AssignmentPropertySection.Name=Ad\u0131
+BusinessInitDiagramFileAction.Error=Hata
+BusinessPaletteFactory.InputComment=Yeni giri\u015F olu\u015Ftur
+BusinessPaletteFactory.Input=Giri\u015F
+BusinessPaletteFactory.decision=Karar
+BusinessPaletteFactory.Document=D\u00F6k\u00FCman
+BusinessPaletteFactory.CreateActor=Yeni Akt\u00F6r olu\u015Ftur
+BusinessPaletteFactory.Actor=Akt\u00F6r
+BusinessPaletteFactory.Database=Verikayna\u011F\u0131
+BusinessPaletteFactory.ListComment=Yeni liste olu\u015Ftur
+BusinessPaletteFactory.DocuemntComment=Yeni d\u00F6k\u00FCman olu\u015Ftur

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_zh_CN.properties

@@ -0,0 +1,105 @@
+BusinessInitDiagramFileAction.DiagramFile=\u56FE\u8868\u6587\u4EF6
+BusinessAbstractParser.ValueOfLongIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ALong
+BusinessAbstractParser.ValueOfFloatIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AFloat
+BusinessPaletteFactory.DataComment=\u521B\u5EFA\u65B0\u7684\u6570\u636E
+CreateDiagramAction.CreateBusinessModel=\u521B\u5EFA\u4E1A\u52A1\u6A21\u578B
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u521B\u5EFA\u65B0\u7684\u903B\u8F91\u56FE\u3002
+BusinessAbstractParser.StringIntegerConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AInteger\u7C7B\u578B
+BusinessPaletteFactory.CreateGear=\u521B\u5EFA\u9F7F\u8F6E
+SimpleBusinessCreationWizardPage.Title=\u65B0\u7684\u4E1A\u52A1\u6A21\u578B
+BusinessNewDiagramFileWizard.CreateNewDiagram=\u57FA\u4E8E {0} \u6A21\u578B\u5185\u5BB9\u521B\u5EFA\u65B0\u56FE
+BusinessAbstractParser.UnknownLiteral=\u65E0\u6548\u7684\u6587\u5B57
+BusinessAbstractParser.StringLongConverError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3ALong\u7C7B\u578B
+AssignmentPropertySection.DeleteAssignment=\u5220\u9664\u5206\u914D
+AssignmentPropertySection.Type=\u7C7B\u578B
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u53EF\u7528\u7684\u57DF\u6A21\u578B\u5143\u7D20:
+BusinessPaletteFactory.BidirectionalRelationShip=\u53CC\u5411\u5173\u8054
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u521B\u5EFA\u65B9\u5411\u5173\u8054
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u521B\u5EFA\u53CC\u5411\u5173\u8054
+AssignmentPropertySection.Name=\u540D\u79F0
+CreateAssignmentCommand.CannotAssign=\u4E0D\u80FD\u5206\u914D\u3002
+BusinessNewDiagramFileWizard.DiagramRootElement=\u56FE\u8868\u6839\u5143\u7D20
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u6CA1\u6709\u56FE\u8868\u6839\u5143\u7D20\u88AB\u9009\u4E2D
+BusinessVisualIDRegistry.ParseError=\u4E0D\u80FD\u628A\u89C6\u56FE\u7C7B\u578B\u5F53\u4F5C visualID \u6570\u5B57\u6765\u8F6C\u6362
+OpenDiagramAction.EditBusinessModel=\u7F16\u8F91\u4E1A\u52A1\u6A21\u578B
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AByte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ACharacter
+BusinessPaletteFactory.ActionComment=\u521B\u5EFA\u65B0\u7684\u52A8\u4F5C
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AString
+BusinessInitDiagramFileAction.Error=\u9519\u8BEF
+BusinessNewDiagramFileWizard.SelectRootElement=\u9009\u62E9\u56FE\u6839\u5143\u7D20
+RepositoryFactoryProxyLabelProvider.Deleted=\uFF08\u5220\u9664\uFF09
+BusinessPaletteFactory.TerminalComment=\u521B\u5EFA\u65B0\u7684\u4E2D\u65AD\u70B9
+BusinessAbstractParser.ValueOfShortIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AShort
+BusinessPaletteFactory.DatabaseComment=\u521B\u5EFA\u65B0\u7684\u6570\u636E\u5E93
+AssignmentPropertySection.Comment=\u6CE8\u91CA
+SimpleBusinessCreationWizard.NewBusinessModel=\u65B0\u7684\u4E1A\u52A1\u6A21\u578B
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u9009\u4E2D\u4E86\u65E0\u6548\u7684\u56FE\u8868\u6839\u5143\u7D20
+BusinessInitDiagramFileAction.IntialNew=\u521D\u59CB\u5316\u65B0\u7684
+FindAssignmentAction.FindAssignments=\u67E5\u627E\u5206\u914D\u4EFB\u52A1
+RepositoryFactoryProxyLabelProvider.NotFound=\uFF08\u672A\u53D1\u73B0\uFF09
+BusinessPaletteFactory.Terminal=\u4E2D\u65AD\u70B9
+BusinessAbstractParser.InvalidInputAt=\u65E0\u6548\u7684\u8F93\u5165\u5728
+BusinessPaletteFactory.Gear=\u9F7F\u8F6E
+BusinessPaletteFactory.InputComment=\u521B\u5EFA\u65B0\u7684\u8F93\u5165
+BusinessPaletteFactory.Data=\u6570\u636E
+BusinessPaletteFactory.Ellipse=\u692D\u5706
+BusinessPaletteFactory.Input=\u8F93\u5165
+BusinessPaletteFactory.List=\u5217\u8868
+BusinessPaletteFactory.Relationshop=\u5173\u7CFB
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u4E3A Boolean
+BusinessPaletteFactory.decision=\u51B3\u7B56
+BusinessPaletteFactory.Document=\u6587\u6863
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u9009\u62E9\u57DF\u6A21\u578B\u5143\u7D20
+BusinessPaletteFactory.CreateActor=\u521B\u5EFA\u89D2\u8272
+BusinessAbstractParser.StringDoubleConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3ADoule\u7C7B\u578B
+BusinessPaletteFactory.Actor=\u89D2\u8272
+EditAction.Edit=\u7F16\u8F91
+BusinessCreationWizardPage.CreateBusinessDiagram=\u521B\u5EFA\u903B\u8F91\u56FE
+BusinessPaletteFactory.Database=\u6570\u636E\u6E90
+BusinessPaletteFactory.ListComment=\u521B\u5EFA\u65B0\u7684\u5217\u8868
+BusinessPaletteFactory.DirectionalRelationShip=\u65B9\u5411\u5173\u8054
+BusinessPaletteFactory.Action=\u64CD\u4F5C
+BusinessPaletteFactory.RelationshopComment=\u521B\u5EFA\u65B0\u7684\u5173\u7CFB
+SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
+BusinessInitDiagramFileAction.LoadFaild=\u6A21\u578B\u6587\u4EF6\u52A0\u8F7D\u5931\u8D25
+BusinessPaletteFactory.DecisionComment=\u521B\u5EFA\u65B0\u7684\u51B3\u7B56
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ADouble
+OpenDiagramAction.ReadBusinessModel=\u8BFB\u53D6\u4E1A\u52A1\u6A21\u578B
+BusinessInitDiagramFileAction.UnableToLoadResource=\u4E0D\u80FD\u53BB\u88C5\u8F7D\u8D44\u6E90:
+BusinessPaletteFactory.CreateEllipse=\u521B\u5EFA\u692D\u5706
+BusinessNewDiagramFileWizard.DiagramFile=\u56FE\u8868\u6587\u4EF6
+BusinessAbstractParser.StringShortConverError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AShort\u7C7B\u578B
+BusinessPaletteFactory.DocuemntComment=\u521B\u5EFA\u65B0\u7684\u6587\u6863
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AInteger
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u9009\u62E9\u56FE\u6839\u5143\u7D20:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u9009\u62E9\u8981\u5728\u56FE\u4E0A\u63CF\u8FF0\u7684\u8BED\u4E49\u6A21\u578B\u5143\u7D20
+BusinessAbstractParser.StringFloatConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AFloat\u7C7B\u578B
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AByte\u7C7B\u578B
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u521D\u59CB\u5316\u65B0\u7684Ecore\u56FE\u8868\u6587\u4EF6
+BusinessTooltipFigure.assignedMeta={0}\u5206\u914D\u5143\u6570\u636E
+DeleteAssignmentAction.DeleteAssignment=\u5220\u9664\u5206\u914D
+BusinessDiagramEditor.canNotSaveTitle=\u8B66\u544A
+BusinessDiagramEditor.canNotSaveMessage=\u4E1A\u52A1\u6A21\u578B\u672A\u88AB\u7528\u6237\u9501\u5B9A\uFF0C\u65E0\u6CD5\u4FDD\u5B58\u3002
+BusinessRulersAndGridComposite.Grid_On_Label_Text=\u663E\u793A\u7F51\u683C
+BusinessRulersAndGridComposite.Grid_Level_Label_Text=\u7F51\u683C\u5728\u524D\u9762
+BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=\u4E0E\u7F51\u683C\u5BF9\u9F50
+BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=\u4E0E\u56FE\u5F62\u5BF9\u9F50
+BusinessRulersAndGridComposite.Ruler_On_Label_Text=\u663E\u793A\u6807\u5C3A
+BusinessRulersAndGridComposite.Ruler_Units_Label_Text=\u6807\u5C3A\u5355\u4F4D
+BusinessRulersAndGridComposite.Grid_Spacing_Label_Text=\u7F51\u683C\u95F4\u8DDD
+BusinessRulersAndGridComposite.Display_Group_Label_Text=\u663E\u793A
+BusinessRulersAndGridComposite.Measurement_Group_Label_Text=\u5EA6\u91CF
+BusinessRulersAndGridComposite.Gridline_Group_Label_Text=\u7F51\u683C\u7EBF
+BusinessRulersAndGridComposite.Line_Color_Label_Text=\u989C\u8272
+BusinessRulersAndGridComposite.Line_Style_Label_Text=\u6837\u5F0F
+BusinessRulersAndGridComposite.Restore_Defaults_Label_Text=\u6062\u590D\u9ED8\u8BA4\u503C
+BusinessRulersAndGridComposite.Inches_Label_Text=\u82F1\u5BF8
+BusinessRulersAndGridComposite.Centimeters_Label_Text=\u5398\u7C73
+BusinessRulersAndGridComposite.Pixel_Label_Text=\u50CF\u7D20
+BusinessRulersAndGridComposite.Solid_Label_Text=\u5B9E\u7EBF
+BusinessRulersAndGridComposite.Dash_Label_Text=\u7834\u6298\u53F7
+BusinessRulersAndGridComposite.Dot_Label_Text=\u70B9
+BusinessRulersAndGridComposite.Dash_Dot_Label_Text=\u70B9\u5212\u7EBF
+BusinessRulersAndGridComposite.Dash_Dot_Dot_Label_Text=\u53CC\u70B9\u5212\u7EBF
+BusinessRulersAndGridComposite.Spaced_Dot_Label_Text=\u95F4\u9694\u70B9

i18n/plugins/org.talend.designer.codegen.nl/.classpath

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<classpath>
+	<classpathentry kind="src" path="src/main/java"/>
+	<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
+	<classpathentry kind="con" path="org.eclipse.pde.core.requiredPlugins"/>
+	<classpathentry kind="output" path="class"/>
+</classpath>

i18n/plugins/org.talend.designer.codegen.nl/.project

@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>org.talend.designer.codegen.nl</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.jdt.core.javabuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.ManifestBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.pde.SchemaBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.pde.PluginNature</nature>
+		<nature>org.eclipse.jdt.core.javanature</nature>
+	</natures>
+</projectDescription>

i18n/plugins/org.talend.designer.codegen.nl/META-INF/MANIFEST.MF

@@ -0,0 +1,8 @@
+Manifest-Version: 1.0
+Bundle-ManifestVersion: 2
+Bundle-Name: org.talend.designer.codegen Nl Fragment
+Bundle-SymbolicName: org.talend.designer.codegen.nl
+Bundle-Version: 7.3.1.qualifier
+Fragment-Host: org.talend.designer.codegen
+Bundle-Localization: plugin
+Bundle-Vendor: .Talend SA.

i18n/plugins/org.talend.designer.codegen.nl/build.properties

@@ -0,0 +1,16 @@
+source.. = src/main/java/
+output.. = class/
+bin.includes = META-INF/,\
+               .,\
+               plugin_en.properties,\
+	       plugin_zh_CN.properties\
+	       ,plugin_ru.properties\
+	       ,plugin_hr.properties\
+	       ,plugin_fr.properties\
+	       ,plugin_el.properties\
+	       ,plugin_ja.properties\
+	       ,plugin_it.properties\
+	       ,plugin_es.properties\
+	       ,plugin_pl.properties\
+	       ,plugin_de.properties\
+	       ,plugin_swtbot.properties

i18n/plugins/org.talend.designer.codegen.nl/plugin_el.properties

@@ -0,0 +1,5 @@
+providerName=www.example.org
+pluginName=\u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF EmittersPool
+components=\u03A3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03AC \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03B1
+trunjob=tRunJob
+format=\u039C\u03BF\u03C1\u03C6\u03AE

i18n/plugins/org.talend.designer.codegen.nl/plugin_en.properties

@@ -0,0 +1,5 @@
+providerName=www.example.org
+pluginName=EmittersPool Model
+components=Components
+trunjob=tRunJob
+format=Format

i18n/plugins/org.talend.designer.codegen.nl/plugin_fr.properties

@@ -0,0 +1,5 @@
+providerName=www.example.org
+pluginName=Mod\u00E8le EmittersPool
+components=Composants
+trunjob=tRunJob
+format=Format

i18n/plugins/org.talend.designer.codegen.nl/plugin_hr.properties

@@ -0,0 +1 @@
+providerName=www.primjer.com

i18n/plugins/org.talend.designer.codegen.nl/plugin_ja.properties

@@ -0,0 +1,5 @@
+providerName=www.example.org
+pluginName=EmittersPool \u30E2\u30C7\u30EB
+components=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8
+trunjob=tRunJob
+format=\u5F62\u5F0F