fix(TPS-3404):An error occurs on tFileOutputExcel after Iterate when /tmp/profiles folder does not exist

* fix(TDI-42092)

.gitignore

@@ -11,4 +11,3 @@ main/plugins/org.talend.designer.codegen/resources/sparkstreaming_header.javajet
 main/plugins/org.talend.designer.codegen/resources/sparkstreaming_subprocess_footer.javajet
 main/plugins/org.talend.designer.codegen/resources/sparkstreaming_subprocess_header.javajet
 main/plugins/org.talend.designer.codegen/resources/routelet.skeleton
-.DS_Store

CONTRIBUTORS.md

@@ -4,7 +4,4 @@ Huge thanks to these people who contributed in making Talend product better:
  - [jlolling](https://github.com/jlolling) (Jan -and Miss- Lolling)
  - [kirkalicious](https://github.com/kirkalicious) (Kirk Tarou)
  - [mrizzato](https://github.com/mrizzato) (Massimiliano Rizzato)
- - [overpackaging](https://github.com/overpackaging) (Steeve Dreux)
- - [brazabr](https://github.com/brazabr) (Thiago Benvenuto)
- - [phoflack](https://jira.talendforge.org/secure/ViewProfile.jspa?name=phoflack) (Philip Hoflack)
- - [bgunics-talend](https://github.com/bgunics-talend) (Balasz Gunics)
+ - [brazabr](https://github.com/brazabr) (Thiago Benvenuto)

PATCH_RELEASE_NOTE.md

@@ -0,0 +1,68 @@
+---
+version: 7.0.1
+module: https://talend.poolparty.biz/coretaxonomy/42
+product:
+- https://talend.poolparty.biz/coretaxonomy/23
+---
+
+# TPS-3404
+
+| Info             | Value |
+| ---------------- | ---------------- |
+| Patch Name       | Patch\_20190920\_TPS-3404\_v1-7.0.1 |
+| Release Date     | 2019-10-11 |
+| Target Version   | 7.0.1.20190226\_1146-patch |
+| Product affected | Talend Studio |
+
+## Introduction
+
+This is a self-contained patch.
+
+**NOTE**: For information on how to obtain this patch, reach out to your Support contact at Talend.
+
+## Fixed issues
+
+This patch contains the following fixes:
+
+- TPS-3404 [7.0.1] An error occurs on tFileOutputExcel after Iterate when /tmp/profiles folder does not exist (TDI-42092)
+
+## Prerequisites
+
+Consider the following requirements for your system:
+
+- Talend Studio 7.0.1 must be installed.
+- Patch TPS-2956 must be installed.
+
+
+## Installation
+
+### Installing the patch using Software update
+
+1) Logon TAC and switch to Configuration->Software Update, then enter the correct values and save referring to the documentation: https://help.talend.com/reader/f7Em9WV_cPm2RRywucSN0Q/j9x5iXV~vyxMlUafnDejaQ
+
+2) Switch to Software update page, where the new patch will be listed. The patch can be downloaded from here into the nexus repository.
+
+3) On Studio Side: Logon Studio with remote mode, on the logon page the Update button is displayed: click this button to install the patch.
+
+### Installing the patch using Talend Studio
+
+1) Create a folder named "patches" under your studio installer directory and copy the patch .zip file to this folder.
+
+2) Restart your studio: a window pops up, then click OK to install the patch, or restart the commandline and the patch will be installed automatically.
+
+### Installing the patch using Commandline
+
+Execute the following commands:
+
+1. Talend-Studio-win-x86_64.exe -nosplash -application org.talend.commandline.CommandLine -consoleLog -data commandline-workspace startServer -p 8002 --talendDebug
+2. initRemote {tac_url} -ul {TAC login username} -up {TAC login password}
+3. checkAndUpdate -tu {TAC login username} -tup {TAC login password}
+
+## Uninstallation
+Backup the Affected files list below. Uninstall the patch by restore the backup files.
+
+## Affected files for this patch
+
+The following files are installed by this patch:
+
+- {Talend\_Studio\_path}/plugins/org.talend.designer.components.localprovider\_7.0.1.20190226\_1146-patch/components/tFileOutputExcel/tFileOutputExcel/_begin.javajet

README.md

@@ -17,7 +17,7 @@ All Talend Studio repositories follow the same file structure:
   |_ main           Main Eclipse plugins and features
     |_ features
     |_ plugins
-  |_ test           Eclipse plugins and features for unit tests.
+  |_ test           Eclipse plugins and features for unit tests. 
       |_ features
       |_ plugins
   |_ i18n           Internationalization plugins and features.
@@ -36,7 +36,7 @@ Documentation is available on [Talend Help Center](http://help.talend.com/).
 
 
 
-## Support
+## Support 
 
 You can ask for help on our [Forum](http://www.talend.com/services/global-technical-support).
 
@@ -55,6 +55,6 @@ See the [CONTRIBUTORS.md](./CONTRIBUTORS.md) file for details.
 
 ## License
 
-Copyright (c) 2006-2019 Talend
+Copyright (c) 2006-2016 Talend
 
 Licensed under the Apache V2 License

i18n/plugins/org.talend.designer.abstractmap.nl/META-INF/MANIFEST.MF

@@ -2,5 +2,5 @@ Manifest-Version: 1.0
 Bundle-ManifestVersion: 2
 Bundle-Name: Nl Fragment
 Bundle-SymbolicName: org.talend.designer.abstractmap.nl
-Bundle-Version: 7.4.1.qualifier
+Bundle-Version: 7.0.2.qualifier
 Fragment-Host: org.talend.designer.abstractmap

i18n/plugins/org.talend.designer.abstractmap.nl/pom.xml

@@ -4,7 +4,7 @@
   <parent>
     <groupId>org.talend.studio</groupId>
     <artifactId>tdi-studio-se</artifactId>
-    <version>7.4.1-SNAPSHOT</version>
+    <version>7.0.2-SNAPSHOT</version>
     <relativePath>../../../</relativePath>
   </parent>
   <artifactId>org.talend.designer.abstractmap.nl</artifactId>

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_de.properties

@@ -3,4 +3,4 @@ prefs.configuration.title=Map Komponenten Einstellungen:
 prefs.configuration.LINK_STYLE.LINE=Linien (schnell)
 prefs.configuration.LINK_STYLE.BEZIER_CURVE=Kurven
 prefs.configuration.LINK_STYLE=Standard Mapping-Verbindungen anzeigen als:
-DraggingInfosPopup.draggingEntries=Dragging {0} Eintr\u00E4ge.
+DraggingInfosPopup.draggingEntries=Dragging {0} Einträge.

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_el.properties

@@ -0,0 +1,6 @@
+prefs.configuration.LINK_STYLE.AUTO=\u0391\u03C5\u03C4\u03CC\u03BC\u03B1\u03C4\u03B1
+prefs.configuration.title=\u03A0\u03C1\u03BF\u03C4\u03B9\u03BC\u03AE\u03C3\u03B5\u03B9\u03C2 \u03C3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03CE\u03BD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD \u03C7\u03AC\u03C1\u03C4\u03B7 :
+prefs.configuration.LINK_STYLE.LINE=\u0393\u03C1\u03B1\u03BC\u03BC\u03AD\u03C2 (\u03B3\u03C1\u03AE\u03B3\u03BF\u03C1\u03B1)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u039A\u03B1\u03BC\u03C0\u03CD\u03BB\u03B5\u03C2
+prefs.configuration.LINK_STYLE=\u0395\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C0\u03C1\u03BF\u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03C9\u03BD \u03C7\u03B1\u03C1\u03C4\u03BF\u03B3\u03C1\u03B1\u03C6\u03B9\u03BA\u03CE\u03BD \u03C3\u03C5\u03BD\u03B4\u03AD\u03C3\u03BC\u03C9\u03BD \u03C9\u03C2:
+DraggingInfosPopup.draggingEntries=\u03A3\u03CD\u03C1\u03BF\u03BD\u03C4\u03B1\u03C2 {0} \u03BA\u03B1\u03C4\u03B1\u03C7\u03C9\u03C1\u03AE\u03C3\u03B5\u03B9\u03C2.

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_fr.properties

@@ -1,19 +1,19 @@
 prefs.configuration.LINK_STYLE.AUTO=Auto
-prefs.configuration.title=Pr\u00E9f\u00E9rences des composants de mapping\:
+prefs.configuration.title=Préférences des composants de mapping\:
 prefs.configuration.LINK_STYLE.LINE=Lignes (rapide)
 prefs.configuration.LINK_STYLE.BEZIER_CURVE=Courbes
-prefs.configuration.LINK_STYLE=Affichage par d\u00E9faut du lien de mapping \:
-DraggingInfosPopup.draggingEntry=Glissement de {0} entr\u00E9e.
-DraggingInfosPopup.dropInvalid=\n<< D\u00E9poser invalide >>\n
-DraggingInfosPopup.draggingEntries=Glissement de {0} entr\u00E9es.
-DraggingInfosPopup.overwriteMode=\ > Mode \u00E9crasement
-DraggingInfosPopup.appendMode=\ > Mode \u00E9crire apr\u00E8s
-DraggingInfosPopup.appendModeToOverwrite=> Mode \u00E9criture \u00E0 la suite (Ctrl pour \u00E9craser)
-DraggingInfosPopup.insertAllSelectedEntries=\ > Ins\u00E9rer toutes les entr\u00E9es s\u00E9lectionn\u00E9es
-DraggingInfosPopup.insertRemainingEntries=\ > Ins\u00E9rer les entr\u00E9es restantes
+prefs.configuration.LINK_STYLE=Affichage par défaut du lien de mapping \:
+DraggingInfosPopup.draggingEntry=Glissement de {0} entrée.
+DraggingInfosPopup.dropInvalid=\n<< Déposer invalide >>\n
+DraggingInfosPopup.draggingEntries=Glissement de {0} entrées.
+DraggingInfosPopup.overwriteMode=\ > Mode écrasement
+DraggingInfosPopup.appendMode=\ > Mode écrire après
+DraggingInfosPopup.appendModeToOverwrite=> Mode écriture à la suite (Ctrl pour écraser)
+DraggingInfosPopup.insertAllSelectedEntries=\ > Insérer toutes les entrées sélectionnées
+DraggingInfosPopup.insertRemainingEntries=\ > Insérer les entrées restantes
 DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> Chaque expression source vers chaque expression cible
 DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> Chaque expression source vers chaque expression cible
 DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=> Toutes les expressions source vers une seule expression cible (Maj pour modifier le mapping)
 DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=> Toutes les expressions source vers une seule expression cible
-DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=> Toutes les entr\u00E9es source vers une seule expression cible (Maj pour modifier le mapping)
-DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=> Toutes les entr\u00E9es source vers une seule expression cible
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=> Toutes les entrées source vers une seule expression cible (Maj pour modifier le mapping)
+DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpression=> Toutes les entrées source vers une seule expression cible

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_nl.properties

@@ -0,0 +1,3 @@
+prefs.configuration.LINK_STYLE.AUTO=Automatisch
+prefs.configuration.LINK_STYLE.LINE=Lijnen (snel)
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=Rondingen

i18n/plugins/org.talend.designer.abstractmap.nl/src/java/main/messages_zh_CN.properties

@@ -1,19 +1,13 @@
 prefs.configuration.LINK_STYLE.AUTO=\u81EA\u52A8
-prefs.configuration.title=\u6620\u5C04\u7EC4\u4EF6\u9996\u9009\u9879:
-prefs.configuration.LINK_STYLE.LINE=\u76F4\u7EBF (\u5FEB)
-prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u66F2\u7EBF
-prefs.configuration.LINK_STYLE=\u9ED8\u8BA4\u6620\u5C04\u8FDE\u63A5\u663E\u793A\u4E3A:
+prefs.configuration.title=\u8fd0\u884c\u6b65\u9aa4\u914d\u7f6e
+prefs.configuration.LINK_STYLE=\u9ED8\u8BA4\u94FE\u63A5\u663E\u793A\u4E3A\uFF1A
 DraggingInfosPopup.draggingEntry=\u62D6\u52A8 {0} \u6761\u76EE
-DraggingInfosPopup.dropInvalid=\\n<< \u65E0\u6548\u653E\u7F6E >>\\n
-DraggingInfosPopup.draggingEntries=\u62D6\u52A8 {0} \u4E2A\u6761\u76EE\u3002
-DraggingInfosPopup.dropInvalidWithKey=\\n<<\u65E0\u6548\u653E\u7F6E>>\\n\u6309\u4F4F Shift \u548C Ctrl \u952E\u4EE5\u8FDB\u884C\u4E00\u5BF9\u4E00\u6620\u5C04\u5E76\u6539\u5199
-DraggingInfosPopup.overwriteMode=\\ > \u6539\u5199\u6A21\u5F0F
-DraggingInfosPopup.appendMode=\\ > \u8FFD\u52A0\u6A21\u5F0F
-DraggingInfosPopup.appendModeToOverwrite=\\ > \u8FFD\u52A0\u6A21\u5F0F (Ctrl \u952E\u6765\u6539\u5199)
-DraggingInfosPopup.insertAllSelectedEntries=\\ > \u63D2\u5165\u6240\u6709\u9009\u5B9A\u6761\u76EE
-DraggingInfosPopup.insertRemainingEntries=\\ > \u63D2\u5165\u5269\u4F59\u6761\u76EE
-DraggingInfosPopup.eachSourceEntryExpressionToEachTargetExpression=> \u6BCF\u4E2A\u6E90\u6761\u76EE\u8868\u8FBE\u5F0F\u5230\u6BCF\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
-DraggingInfosPopup.eachSourceEntryToEachTargetExpression=> \u6BCF\u4E2A\u6E90\u6761\u76EE\u5230\u6BCF\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
+DraggingInfosPopup.draggingEntries=\u62D6\u52A8 {0} \u6761\u76EE
+DraggingInfosPopup.overwriteMode=\ > \u8986\u76D6\u6A21\u5F0F
+DraggingInfosPopup.appendMode=>\u9644\u52A0\u6A21\u5F0F
+DraggingInfosPopup.appendModeToOverwrite=\u9644\u52A0\u6A21\u5F0F(\u6309Ctrl\u952E\u7528\u6765\u8986\u76D6)
+DraggingInfosPopup.insertAllSelectedEntries=> \u63D2\u5165\u6240\u6709\u9009\u62E9\u9879
+DraggingInfosPopup.insertRemainingEntries=\ > \u63D2\u5165\u5269\u4F59\u9879
 DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpressionShiftKey=\u6240\u6709\u6E90\u9879\u90FD\u8868\u793A\u4E3A\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F(Shift\u952E\u8F6C\u6362\u4E3A\u66F4\u6539\u6620\u5C04)
 DraggingInfosPopup.allSourceEntriesExpressionToASingleOneTargetExpression=>\u6240\u6709\u6E90\u9879\u90FD\u8868\u793A\u4E3A\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F
 DraggingInfosPopup.allSourceEntriesToASingleOneTargetExpressionShiftKey=\u6240\u6709\u6E90\u9879\u5230\u5355\u4E2A\u76EE\u6807\u8868\u8FBE\u5F0F(Shift \u952E\u8F6C\u6362\u4E3A\u66F4\u6539\u6620\u5C04)

i18n/plugins/org.talend.designer.alfrescooutput.nl/META-INF/MANIFEST.MF

@@ -2,5 +2,5 @@ Manifest-Version: 1.0
 Bundle-ManifestVersion: 2
 Bundle-Name: Nl Fragment
 Bundle-SymbolicName: org.talend.designer.alfrescooutput.nl
-Bundle-Version: 7.4.1.qualifier
+Bundle-Version: 7.0.2.qualifier
 Fragment-Host: org.talend.designer.alfrescooutput

i18n/plugins/org.talend.designer.alfrescooutput.nl/pom.xml

@@ -4,7 +4,7 @@
   <parent>
     <groupId>org.talend.studio</groupId>
     <artifactId>tdi-studio-se</artifactId>
-    <version>7.4.1-SNAPSHOT</version>
+    <version>7.0.2-SNAPSHOT</version>
     <relativePath>../../../</relativePath>
   </parent>
   <artifactId>org.talend.designer.alfrescooutput.nl</artifactId>

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_ar.properties

@@ -0,0 +1,13 @@
+AlfrescoModelDialog.modelTable.title=\u0639\u0646\u0648\u0627\u0646
+AlfrescoModelDialog.availableAspects=\u0627\u0644\u062C\u0648\u0627\u0646\u0628 \u0627\u0644\u0645\u062A\u0627\u062D\u0629
+AlfrescoModelDialog.missingAspectDefinitions.title=\u062A\u0639\u0631\u064A\u0641\u0627\u062A \u0627\u0644\u062C\u0648\u0627\u0646\u0628 \u0645\u0641\u0642\u0648\u062F\u0629
+AlfrescoOutputManager.schemaError.title=\u062E\u0637\u0623 \u0641\u064A \u0627\u0644\u0645\u062E\u0637\u0637
+AlfrescoModelDialog.missingTypeDefinitions.title=\u0645\u0639\u0631\u0641\u0627\u062A \u0646\u0648\u0639 \u0645\u0641\u0642\u0648\u062F\u0629
+AlfrescoModelDialog.add=\u0625\u0636\u0627\u0641\u0629...
+AlfrescoModelDialog.aspects=\u0627\u0644\u062C\u0648\u0627\u0646\u0628
+AlfrescoOutputManager.schemaError.msg=\u064A\u0631\u062C\u0631\u0649 \u0645\u0632\u0627\u0645\u0646\u0629 \u0627\u0644\u062E\u0637\u0637 \u0623\u0648\u0644\u0627
+AlfrescoOutputModelManager.alreadyAdded=\u0647\u0630\u0627 \u0627\u0644\u0646\u0645\u0648\u0630\u062C \u0645\u0636\u0627\u0641 \u0645\u0633\u0628\u0642\u0627
+AlfrescoModelDialog.removeModelFailed=\u0641\u0634\u0644 \u0625\u0632\u0627\u0644\u0629 \u0646\u0645\u0648\u0630\u062C
+AlfrescoModelDialog.type=\u0646\u0648\u0639
+AlfrescoModelDialog.addModelFailed=\u0641\u0634\u0644 \u0625\u0636\u0627\u0641\u0629 \u0646\u0645\u0648\u0630\u062C
+AlfrescoModelDialog.modelTable.name=\u0627\u0644\u0627\u0633\u0645

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_de.properties

@@ -1,18 +1,18 @@
-AlfrescoModelDialog.missingAspectDefinitions.msg=Die gew\u00E4hlten Aspekte beziehen sich auf unbekannte Alfresco-Aspekte: ${0}. Bitte bestimmen Sie die Alfresco-Modelldateien, die diese definieren.
+AlfrescoModelDialog.missingAspectDefinitions.msg=Die gewählten Aspekte beziehen sich auf unbekannte Alfresco-Aspekte: ${0}. Bitte bestimmen Sie die Alfresco-Modelldateien, die diese definieren.
 AlfrescoModelDialog.modelTable.title=Titel
-AlfrescoModelDialog.availableAspects=Verf\u00FCgbare Aspekte
+AlfrescoModelDialog.availableAspects=Verfügbare Aspekte
 AlfrescoModelDialog.missingAspectDefinitions.title=Fehlende Aspektdefinitionen
 AlfrescoOutputManager.schemaError.title=Fehler in Schema
 AlfrescoModelDialog.missingTypeDefinitions.title=Fehlende Typdefinitionen
-AlfrescoModelDialog.add=Hinzuf\u00FCgen...
+AlfrescoModelDialog.add=Hinzufügen...
 AlfrescoOutputModelManager.errorReadingModel=Fehler beim Lesen der Alfresco-Modell-Datei
 AlfrescoModelDialog.aspects=Aspekte
 AlfrescoOutputManager.schemaError.msg=Bitte erst das Schema synchronisieren
-AlfrescoOutputModelManager.alreadyAdded=Dieses Modell wurde bereits hinzugef\u00FCgt
+AlfrescoOutputModelManager.alreadyAdded=Dieses Modell wurde bereits hinzugefügt
 AlfrescoModelDialog.removeModelFailed=Entfernen des Models fehlgeschlagen
-AlfrescoOutputModelManager.prefixConflict=Kann das Modell nicht hinzuf\u00FCgen, da Prefix-Konflikt mit zuvor hinzugef\u00FCgtem Modell f\u00FCr
-AlfrescoOutputModelManager.notYetAdded=Dieses Modell wurde noch nicht hinzugef\u00FCgt.
+AlfrescoOutputModelManager.prefixConflict=Kann das Modell nicht hinzufügen, da Prefix-Konflikt mit zuvor hinzugefügtem Modell für
+AlfrescoOutputModelManager.notYetAdded=Dieses Modell wurde noch nicht hinzugefügt.
 AlfrescoModelDialog.type=Typ
-AlfrescoModelDialog.addModelFailed=Modell hinzuf\u00FCgen fehlgeschlagen
+AlfrescoModelDialog.addModelFailed=Modell hinzufügen fehlgeschlagen
 AlfrescoModelDialog.modelTable.name=Name
 AlfrescoModelDialog.remove=Entfernen

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_el.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=\u039F\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03B1\u03BD\u03B1\u03C6\u03AD\u03C1\u03BF\u03BD\u03C4\u03B1\u03B9 \u03C3\u03B5 \u03AC\u03B3\u03BD\u03C9\u03C3\u03C4\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 Alfresco: ${0}.\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C0\u03B1\u03C1\u03AD\u03C7\u03B5\u03C4\u03B5 \u03C4\u03B1 \u03B1\u03C1\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 alfresco \u03C0\u03BF\u03C5 \u03C4\u03B9\u03C2 \u03BF\u03C1\u03AF\u03B6\u03BF\u03C5\u03BD.
+AlfrescoModelDialog.modelTable.title=\u03A4\u03AF\u03C4\u03BB\u03BF\u03C2
+AlfrescoModelDialog.availableAspects=\u0394\u03B9\u03B1\u03B8\u03AD\u03C3\u03B9\u03BC\u03B5\u03C2 \u03A0\u03C4\u03C5\u03C7\u03AD\u03C2
+AlfrescoModelDialog.missingAspectDefinitions.title=\u03A7\u03B1\u03BC\u03AD\u03BD\u03BF\u03B9 \u03BF\u03C1\u03B9\u03C3\u03BC\u03BF\u03AF \u03C0\u03C4\u03C5\u03C7\u03CE\u03BD
+AlfrescoOutputManager.schemaError.title=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03C3\u03C4\u03BF \u03C3\u03C7\u03AE\u03BC\u03B1
+AlfrescoModelDialog.missingTypeDefinitions.msg=\u039F\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03B1\u03BD\u03B1\u03C6\u03AD\u03C1\u03BF\u03BD\u03C4\u03B1\u03B9 \u03C3\u03B5 \u03AC\u03B3\u03BD\u03C9\u03C3\u03C4\u03B5\u03C2 \u03C0\u03C4\u03C5\u03C7\u03AD\u03C2 \u03AE \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03B1 Alfresco: ${0}.\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C0\u03B1\u03C1\u03AD\u03C7\u03B5\u03C4\u03B5 \u03C4\u03B1 \u03B1\u03C1\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 alfresco \u03C0\u03BF\u03C5 \u03C4\u03B9\u03C2 \u03BF\u03C1\u03AF\u03B6\u03BF\u03C5\u03BD.
+AlfrescoModelDialog.missingTypeDefinitions.title=\u03A7\u03B1\u03BC\u03AD\u03BD\u03BF\u03B9 \u03BF\u03C1\u03B9\u03C3\u03BC\u03BF\u03AF \u03C4\u03CD\u03C0\u03C9\u03BD
+AlfrescoModelDialog.add=\u03A0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7
+AlfrescoOutputModelManager.errorReadingModel=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03B1\u03BD\u03AC\u03B3\u03BD\u03C9\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 Alfresco \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoModelDialog.aspects=\u03A0\u03C4\u03C5\u03C7\u03AD\u03C2
+AlfrescoOutputManager.schemaError.msg=\u03A0\u03B1\u03C1\u03B1\u03BA\u03B1\u03BB\u03CE \u03C3\u03C5\u03B3\u03C7\u03C1\u03BF\u03BD\u03AF\u03C3\u03C4\u03B5 \u03C0\u03C1\u03CE\u03C4\u03B1 \u03C4\u03BF \u03C3\u03C7\u03AE\u03BC\u03B1
+AlfrescoOutputModelManager.alreadyAdded=\u0391\u03C5\u03C4\u03CC \u03C4\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03AD\u03C7\u03B5\u03B9 \u03AE\u03B4\u03B7 \u03C0\u03C1\u03BF\u03C3\u03C4\u03B5\u03B8\u03B5\u03AF
+AlfrescoModelDialog.removeModelFailed=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03B1\u03C0\u03BF\u03BC\u03AC\u03BA\u03C1\u03C5\u03BD\u03C3\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoOutputModelManager.prefixConflict=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03C0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5, \u03C3\u03CD\u03B3\u03BA\u03C1\u03BF\u03C5\u03C3\u03B7 \u03C0\u03C1\u03BF\u03B8\u03AD\u03BC\u03B1\u03C4\u03BF\u03C2 \u03BC\u03B5 \u03C0\u03C1\u03BF\u03B7\u03B3\u03BF\u03CD\u03BC\u03B5\u03BD\u03B1 \u03C0\u03C1\u03BF\u03C3\u03B9\u03B8\u03AD\u03BC\u03B5\u03BD\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03B3\u03B9\u03B1
+AlfrescoOutputModelManager.notYetAdded=\u03A4\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF \u03B1\u03C5\u03C4\u03CC \u03B4\u03B5\u03BD \u03AD\u03C7\u03B5\u03B9 \u03C0\u03C1\u03BF\u03C3\u03C4\u03B5\u03B8\u03B5\u03AF \u03B1\u03BA\u03CC\u03BC\u03B1
+AlfrescoModelDialog.type=\u03A4\u03CD\u03C0\u03BF\u03C2
+AlfrescoModelDialog.addModelFailed=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C3\u03C4\u03B7\u03BD \u03C0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+AlfrescoModelDialog.modelTable.name=\u038C\u03BD\u03BF\u03BC\u03B1
+AlfrescoModelDialog.remove=\u0391\u03C6\u03B1\u03AF\u03C1\u03B5\u03C3\u03B7
+AlfrescoOutputManager.failedLoadModel=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03B1\u03C0\u03CC \u03BC\u03B5\u03C4\u03B1\u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5, \u03B5\u03C0\u03B1\u03BD\u03B5\u03BA\u03BA\u03AF\u03BD\u03B7\u03C3\u03B7

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_es.properties

@@ -1,5 +1,5 @@
 AlfrescoModelDialog.missingAspectDefinitions.msg=Los aspectos seleccionados hacen referencia a aspecto(s) Alfresco desconocido(s): ${0}. Por favor, suministre los ficheros de modelos Alfresco que los definan.
-AlfrescoModelDialog.modelTable.title=T\u00EDtulo
+AlfrescoModelDialog.modelTable.title=Título
 AlfrescoModelDialog.availableAspects=Aspectos Disponibles
 AlfrescoModelDialog.missingAspectDefinitions.title=Definiciones de aspectos no encontrada
 AlfrescoOutputManager.schemaError.title=Error en el esquema

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_fr.properties

@@ -1,20 +1,20 @@
-AlfrescoModelDialog.missingAspectDefinitions.msg=Les aspects s\u00E9lectionn\u00E9s se r\u00E9f\u00E8rent \u00E0 des aspects Alfresco inconnus : ${0}.\nVeuillez fournir les mod\u00E8les Alfresco qui les d\u00E9finissent.
+AlfrescoModelDialog.missingAspectDefinitions.msg=Les aspects sélectionnés se réfèrent à des aspects Alfresco inconnus : ${0}.\nVeuillez fournir les modèles Alfresco qui les définissent.
 AlfrescoModelDialog.modelTable.title=Titre
 AlfrescoModelDialog.availableAspects=Aspects disponibles
-AlfrescoModelDialog.missingAspectDefinitions.title=D\u00E9finitions d'aspects manquantes
-AlfrescoOutputManager.schemaError.title=Erreur dans le sch\u00E9ma
-AlfrescoModelDialog.missingTypeDefinitions.msg=Le type s\u00E9lectionn\u00E9 se r\u00E9f\u00E8re \u00E0 des aspects ou types Alfresco inconnus : ${0}. Veuillez fournir les mod\u00E8les Alfresco qui les d\u00E9finissent.
-AlfrescoModelDialog.missingTypeDefinitions.title=D\u00E9finitions de type manquantes
+AlfrescoModelDialog.missingAspectDefinitions.title=Définitions d'aspects manquantes
+AlfrescoOutputManager.schemaError.title=Erreur dans le schéma
+AlfrescoModelDialog.missingTypeDefinitions.msg=Le type sélectionné se réfère à des aspects ou types Alfresco inconnus : ${0}. Veuillez fournir les modèles Alfresco qui les définissent.
+AlfrescoModelDialog.missingTypeDefinitions.title=Définitions de type manquantes
 AlfrescoModelDialog.add=Ajouter...
-AlfrescoOutputModelManager.errorReadingModel=Erreur de lecture du fichier mod\u00E8le Alfresco
+AlfrescoOutputModelManager.errorReadingModel=Erreur de lecture du fichier modèle Alfresco
 AlfrescoModelDialog.aspects=Aspects
-AlfrescoOutputManager.schemaError.msg=Veuillez synchroniser le sch\u00E9ma d'abord
-AlfrescoOutputModelManager.alreadyAdded=Ce mod\u00E8le a d\u00E9j\u00E0 \u00E9t\u00E9 ajout\u00E9
-AlfrescoModelDialog.removeModelFailed=Echec de la suppression du mod\u00E8le
-AlfrescoOutputModelManager.prefixConflict=Impossible d'ajouter le mod\u00E8le, pr\u00E9fixe en conflit avec le mod\u00E8le ajout\u00E9 pr\u00E9c\u00E9demment pour
-AlfrescoOutputModelManager.notYetAdded=Ce mod\u00E8le n'a pas encore \u00E9t\u00E9 ajout\u00E9
+AlfrescoOutputManager.schemaError.msg=Veuillez synchroniser le schéma d'abord
+AlfrescoOutputModelManager.alreadyAdded=Ce modèle a déjà été ajouté
+AlfrescoModelDialog.removeModelFailed=Echec de la suppression du modèle
+AlfrescoOutputModelManager.prefixConflict=Impossible d'ajouter le modèle, préfixe en conflit avec le modèle ajouté précédemment pour
+AlfrescoOutputModelManager.notYetAdded=Ce modèle n'a pas encore été ajouté
 AlfrescoModelDialog.type=Type
-AlfrescoModelDialog.addModelFailed=Echec de l'ajout du mod\u00E8le
+AlfrescoModelDialog.addModelFailed=Echec de l'ajout du modèle
 AlfrescoModelDialog.modelTable.name=Nom
 AlfrescoModelDialog.remove=Supprimer
-AlfrescoOutputManager.failedLoadModel=\u00C9chec du chargement du mod\u00E8le depuis les m\u00E9tadonn\u00E9es du composant, r\u00E9initialisation.
+AlfrescoOutputManager.failedLoadModel=Échec du chargement du modèle depuis les métadonnées du composant, réinitialisation.

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_hr.properties

@@ -0,0 +1,14 @@
+AlfrescoModelDialog.modelTable.title=Naslov
+AlfrescoOutputManager.schemaError.title=Gre\u0161ka u schemi
+AlfrescoModelDialog.missingTypeDefinitions.title=Nedostaju definicije tipa
+AlfrescoModelDialog.add=Dodaj...
+AlfrescoOutputModelManager.errorReadingModel=Gre\u0161ka prilikom \u010Ditanja datoteke s Alfresco modelom
+AlfrescoOutputManager.schemaError.msg=Najprije sinkronizirajte schemu, molim
+AlfrescoOutputModelManager.alreadyAdded=Taj model je ve\u0107 dodan
+AlfrescoModelDialog.removeModelFailed=Ne mogu ukloniti model
+AlfrescoOutputModelManager.prefixConflict=Ne mogu dodati model, prefix je u konfliktu sa prethodno dodanim modelom za
+AlfrescoOutputModelManager.notYetAdded=Taj model jo\u0161 nije dodan
+AlfrescoModelDialog.addModelFailed=Dodavanje modela nije uspjelo
+AlfrescoModelDialog.modelTable.name=Ime
+AlfrescoModelDialog.remove=Ukloni
+AlfrescoOutputManager.failedLoadModel=U\u010Ditavanje modela iz metapodataka komponente nije uspjelo, reinicijaliziram

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_it.properties

@@ -9,10 +9,10 @@ AlfrescoModelDialog.add=Aggiungere...
 AlfrescoOutputModelManager.errorReadingModel=Errore leggendo il modello Alfresco
 AlfrescoModelDialog.aspects=Aspetti
 AlfrescoOutputManager.schemaError.msg=Si prega di sincronizzare inizialemente lo schema
-AlfrescoOutputModelManager.alreadyAdded=Questo modello \u00E8 gi\u00E0 stato aggiunto
+AlfrescoOutputModelManager.alreadyAdded=Questo modello è già stato aggiunto
 AlfrescoModelDialog.removeModelFailed=Impossibile rimuovere modello
 AlfrescoOutputModelManager.prefixConflict=Impossibile aggiungere il modello, in conflitto con un prefisso precedentemente aggiunto
-AlfrescoOutputModelManager.notYetAdded=Modello non ancora agg\u00EEunto
+AlfrescoOutputModelManager.notYetAdded=Modello non ancora aggîunto
 AlfrescoModelDialog.type=Tipo
 AlfrescoModelDialog.addModelFailed=Impossibile aggiungere il modello
 AlfrescoModelDialog.modelTable.name=Nome

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_kr.properties

@@ -0,0 +1,5 @@
+AlfrescoModelDialog.modelTable.title=\uC81C\uBAA9
+AlfrescoOutputManager.schemaError.title=\uC2A4\uD0A4\uB9C8 \uC624\uB958
+AlfrescoOutputModelManager.alreadyAdded=\uC774 \uBAA8\uB378\uC740 \uC774\uBBF8 \uCD94\uAC00\uB418\uC5C8\uC2B5\uB2C8\uB2E4
+AlfrescoOutputModelManager.notYetAdded=\uC774 \uBAA8\uB378\uC740 \uC544\uC9C1 \uCD94\uAC00\uB418\uC9C0 \uC54A\uC558\uC2B5\uB2C8\uB2E4
+AlfrescoModelDialog.modelTable.name=\uC774\uB984

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_nl.properties

@@ -0,0 +1,5 @@
+AlfrescoModelDialog.modelTable.title=Titel
+AlfrescoOutputManager.schemaError.title=Fout in schema
+AlfrescoModelDialog.add=Toevoegen
+AlfrescoModelDialog.removeModelFailed=Fout bij verwijderen model
+AlfrescoModelDialog.modelTable.name=Naam

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_pl.properties

@@ -0,0 +1,20 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=Wybrane aspekty odwo\u0142uj\u0105 si\u0119 do nieznanych aspektów Alfresco: ${0}. Podaj pliki modelu Alfresco, w któych s\u0105 zdefiniowane.
+AlfrescoModelDialog.modelTable.title=Tytu\u0142
+AlfrescoModelDialog.availableAspects=Dost\u0119pne aspekty
+AlfrescoModelDialog.missingAspectDefinitions.title=Brakuj\u0105ce definicje aspektów
+AlfrescoOutputManager.schemaError.title=B\u0142\u0105d w schemacie
+AlfrescoModelDialog.missingTypeDefinitions.msg=Wybrane typy odwo\u0142uj\u0105 si\u0119 do nieznanych typów lub aspektów Alfresco: ${0}. Podaj pliki modelu Alfresco, w któych s\u0105 zdefiniowane.
+AlfrescoModelDialog.missingTypeDefinitions.title=Brakuj\u0105ce definicje typów
+AlfrescoModelDialog.add=Dodaj...
+AlfrescoOutputModelManager.errorReadingModel=B\u0142\u0105d podczas odczytu pliku modelu Alfresco
+AlfrescoModelDialog.aspects=Aspekty
+AlfrescoOutputManager.schemaError.msg=Najpierw zsynchronizuj schematy
+AlfrescoOutputModelManager.alreadyAdded=Ten model zosta\u0142 ju\u017C dodany
+AlfrescoModelDialog.removeModelFailed=Niepowodzenie przy usuwaniu modelu
+AlfrescoOutputModelManager.prefixConflict=Nie mo\u017Cna doda\u0107 modelu, prefix jest w konflikcie z poprzednio dodanym modelem dla
+AlfrescoOutputModelManager.notYetAdded=Ten model nie zosta\u0142 jeszcze dodany
+AlfrescoModelDialog.type=Typ
+AlfrescoModelDialog.addModelFailed=Niepowodzenie przy dodawaniu modelu
+AlfrescoModelDialog.modelTable.name=Nazwa
+AlfrescoModelDialog.remove=Usu\u0144
+AlfrescoOutputManager.failedLoadModel=\u0141adowanie modelu z komponentu metadanych zako\u0144czone niepowodzeniem, ponowna próba

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_pt_BR.properties

@@ -0,0 +1,18 @@
+AlfrescoModelDialog.missingAspectDefinitions.msg=Os aspectos escolhidos referem-se a aspecto(s) Alfresco desconhecido(s): $ {0}. Forneça os arquivos do modelo alfresco que os define.
+AlfrescoModelDialog.modelTable.title=Título
+AlfrescoModelDialog.availableAspects=Aspectos Disponiveis
+AlfrescoOutputManager.schemaError.title=Erro no esquema
+AlfrescoModelDialog.missingTypeDefinitions.msg=O tipo escolhido refere-se ao tipo (s) ou elemento (s) Alfresco desconhecido : $ (0). Forneça o arquivos do modelo alfresco que os define.
+AlfrescoModelDialog.missingTypeDefinitions.title=Definições de tipos faltando
+AlfrescoModelDialog.add=Adicionar...
+AlfrescoOutputModelManager.errorReadingModel=Erro lendo arquivo do modelo Alfresco 
+AlfrescoModelDialog.aspects=Aspectos
+AlfrescoOutputManager.schemaError.msg=Sincronize o esquema primeiro
+AlfrescoOutputModelManager.alreadyAdded=Este modelo já foi adicionado
+AlfrescoModelDialog.removeModelFailed=Falha ao remover modelo
+AlfrescoOutputModelManager.prefixConflict=Não é possível adicionar o modelo. O prefixo está em conflito com um modelo adicionado previamente para
+AlfrescoOutputModelManager.notYetAdded=Este modelo aind não foi adicionado
+AlfrescoModelDialog.addModelFailed=Falha ao adicionar modelo
+AlfrescoModelDialog.modelTable.name=Nome
+AlfrescoModelDialog.remove=Remover
+AlfrescoOutputManager.failedLoadModel=Falha ao carregar modelo do metadado do componente, reinicializando

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_ro.properties

@@ -0,0 +1,3 @@
+AlfrescoModelDialog.type=Tip
+AlfrescoModelDialog.modelTable.name=Nume
+AlfrescoModelDialog.remove=Sterge

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_sk.properties

@@ -1,10 +0,0 @@
-AlfrescoModelDialog.availableAspects=Dostupn\u00E9 Aspekty
-AlfrescoOutputManager.schemaError.title=Chyba v sch\u00E9me
-AlfrescoModelDialog.add=Prida\u0165...
-AlfrescoModelDialog.aspects=Aspekty
-AlfrescoOutputModelManager.alreadyAdded=Tento model u\u017E bol pridan\u00FD
-AlfrescoOutputModelManager.notYetAdded=Tento model e\u0161te nebol pridan\u00FD
-AlfrescoModelDialog.type=Typ
-AlfrescoModelDialog.addModelFailed=Zlyhalo pridanie modelu
-AlfrescoModelDialog.modelTable.name=Meno
-AlfrescoModelDialog.remove=Odstr\u00E1ni\u0165

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_tr.properties

@@ -0,0 +1,4 @@
+AlfrescoModelDialog.modelTable.title=Ba\u015Fl\u0131k
+AlfrescoModelDialog.add=Ekle...
+AlfrescoModelDialog.type=Tip
+AlfrescoModelDialog.modelTable.name=Ad\u0131

i18n/plugins/org.talend.designer.alfrescooutput.nl/src/main/java/messages_zh_CN.properties

@@ -2,19 +2,19 @@ AlfrescoModelDialog.missingAspectDefinitions.msg=\u6240\u9009\u62E9\u7684\u65B9\
 AlfrescoModelDialog.modelTable.title=\u6807\u9898
 AlfrescoModelDialog.availableAspects=\u53EF\u7528\u56E0\u7D20
 AlfrescoModelDialog.missingAspectDefinitions.title=\u7F3A\u7701\u65B9\u9762\u5B9A\u4E49
-AlfrescoOutputManager.schemaError.title=Schema \u9519\u8BEF
+AlfrescoOutputManager.schemaError.title=schema\u9519\u8BEF
 AlfrescoModelDialog.missingTypeDefinitions.msg=\u6240\u9009\u62E9\u7684\u7C7B\u578B\u6D89\u53CA\u672A\u77E5\u7684Alfresco\u7C7B\u578B\u6216\u65B9\u9762: ${0}.\uFF0C\u8BF7\u63D0\u4F9Balfresco \u6A21\u578B\u6587\u4EF6\u5B9A\u4E49\u4ED6\u4EEC.
 AlfrescoModelDialog.missingTypeDefinitions.title=\u7F3A\u7701\u7C7B\u578B\u5B9A\u4E49
 AlfrescoModelDialog.add=\u6DFB\u52A0...
 AlfrescoOutputModelManager.errorReadingModel=\u8BFB\u53D6Alfresco\u7684\u6A21\u578B\u6587\u4EF6\u9519\u8BEF
 AlfrescoModelDialog.aspects=\u65B9\u9762
-AlfrescoOutputManager.schemaError.msg=\u8BF7\u5148\u540C\u6B65 schema
+AlfrescoOutputManager.schemaError.msg=\u8BF7\u5148\u540C\u6B65schema
 AlfrescoOutputModelManager.alreadyAdded=\u8BE5\u6A21\u578B\u5DF2\u6DFB\u52A0
 AlfrescoModelDialog.removeModelFailed=\u79FB\u9664\u6A21\u578B\u5931\u8D25
 AlfrescoOutputModelManager.prefixConflict=\u65E0\u6CD5\u6DFB\u52A0\u6A21\u578B\uFF0C\u524D\u7F00\u4E0E\u4EE5\u524D\u6DFB\u52A0\u6A21\u578B\u51B2\u7A81
 AlfrescoOutputModelManager.notYetAdded=\u8BE5\u6A21\u578B\u5C1A\u672A\u6DFB\u52A0
 AlfrescoModelDialog.type=\u7C7B\u578B
 AlfrescoModelDialog.addModelFailed=\u6DFB\u52A0\u6A21\u578B\u5931\u8D25
-AlfrescoModelDialog.modelTable.name=\u540D\u79F0
-AlfrescoModelDialog.remove=\u79FB\u9664
+AlfrescoModelDialog.modelTable.name=\u8fde\u63a5\u540d
+AlfrescoModelDialog.remove=\u5220\u9664
 AlfrescoOutputManager.failedLoadModel=\u65E0\u6CD5\u52A0\u8F7D\u7684\u7EC4\u4EF6\u5143\u6570\u636E\u6A21\u578B, \u91CD\u65B0\u521D\u59CB\u5316

i18n/plugins/org.talend.designer.business.diagram.nl/META-INF/MANIFEST.MF

@@ -2,7 +2,7 @@ Manifest-Version: 1.0
 Bundle-ManifestVersion: 2
 Bundle-Name: Nl Fragment
 Bundle-SymbolicName: org.talend.designer.business.diagram.nl
-Bundle-Version: 7.4.1.qualifier
+Bundle-Version: 7.0.2.qualifier
 Bundle-Vendor: .Talend SA.
 Fragment-Host: org.talend.designer.business.diagram
 Bundle-Localization: plugin

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_el.properties

@@ -0,0 +1,3 @@
+providerName=.Talend SA.
+pluginName=\u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03C3\u03B9\u03B1\u03BA\u03CC \u03A0\u03C1\u03CC\u03C3\u03B8\u03B5\u03C4\u03BF
+repository.businessProcess=\u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03AC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03B1

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_fr.properties

@@ -1,3 +1,3 @@
 providerName=.Talend SA.
-pluginName=Plug-in m\u00E9tier
+pluginName=Plug-in métier
 repository.businessProcess=Business Models

i18n/plugins/org.talend.designer.business.diagram.nl/plugin_zh_CN.properties

@@ -1,3 +1,2 @@
-providerName=.Talend SA.
 pluginName=\u7EC4\u4EF6\u6A21\u5757
 repository.businessProcess=\u4E1A\u52A1\u6A21\u578B

i18n/plugins/org.talend.designer.business.diagram.nl/pom.xml

@@ -4,7 +4,7 @@
   <parent>
     <groupId>org.talend.studio</groupId>
     <artifactId>tdi-studio-se</artifactId>
-    <version>7.4.1-SNAPSHOT</version>
+    <version>7.0.2-SNAPSHOT</version>
     <relativePath>../../../</relativePath>
   </parent>
   <artifactId>org.talend.designer.business.diagram.nl</artifactId>

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ar.properties

@@ -0,0 +1,56 @@
+BusinessInitDiagramFileAction.DiagramFile=\u0645\u0644\u0641 \u0627\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.ValueOfLongIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0637\u0648\u064A\u0644
+BusinessAbstractParser.ValueOfFloatIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0639\u0634\u0631\u064A
+BusinessPaletteFactory.DataComment=\u0625\u0646\u0634\u0627\u0621 \u0628\u064A\u0627\u0646\u0627\u062A \u062C\u062F\u064A\u062F\u0629
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u0625\u0646\u0634\u0627\u0621 \u0645\u062E\u0637\u0637 \u0623\u0639\u0645\u0627\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.StringIntegerConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0631\u0642\u0645\u064A\u0629
+BusinessAbstractParser.StringLongConverError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0637\u0648\u064A\u0644\u0629
+AssignmentPropertySection.DeleteAssignment=\u062D\u0630\u0641 \u062A\u0643\u0644\u064A\u0641
+AssignmentPropertySection.Type=\u0646\u0648\u0639
+BusinessPaletteFactory.BidirectionalRelationShip=\u0639\u0644\u0627\u0642\u0629 \u062B\u0646\u0627\u0626\u064A\u0629 \u0627\u0644\u0627\u062A\u062C\u0627\u0647
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u0627\u062A\u062C\u0627\u0647 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u062C\u062F\u064A\u062F\u0629 \u062B\u0646\u0627\u0626\u064A\u0629 \u0627\u0644\u0627\u062A\u062C\u0627\u0647
+AssignmentPropertySection.Name=\u0627\u0644\u0627\u0633\u0645
+BusinessNewDiagramFileWizard.DiagramRootElement=\u0639\u0646\u0635\u0631 \u0627\u0644\u0645\u062E\u0637\u0637 \u0627\u0644\u062C\u0630\u0631\u064A
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u0644\u0645 \u064A\u062A\u0645 \u0627\u062E\u062A\u064A\u0627\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0628\u0627\u064A\u062A
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u062D\u0631\u0641
+BusinessPaletteFactory.ActionComment=\u0625\u0646\u0634\u0627\u0621 \u0639\u0645\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0646\u0635
+BusinessInitDiagramFileAction.Error=\u062E\u0637\u0623
+BusinessNewDiagramFileWizard.SelectRootElement=\u0627\u062E\u062A\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessPaletteFactory.TerminalComment=\u0625\u0646\u0634\u0627\u0621 \u0645\u062D\u0637\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessAbstractParser.ValueOfShortIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0642\u0635\u064A\u0631
+BusinessPaletteFactory.DatabaseComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0627\u0639\u062F\u0629 \u0628\u064A\u0627\u0646\u0627\u062A \u062C\u062F\u064A\u062F\u0629
+AssignmentPropertySection.Comment=\u062A\u0639\u0644\u064A\u0642
+BusinessInitDiagramFileAction.IntialNew=\u062A\u0647\u064A\u0626\u0629 \u062C\u062F\u064A\u062F
+BusinessPaletteFactory.Terminal=\u0645\u062D\u0637\u0629
+BusinessAbstractParser.InvalidInputAt=\u062E\u0637\u0623 \u0625\u062F\u062E\u0627\u0644 \u0641\u064A
+BusinessPaletteFactory.InputComment=\u0625\u0646\u0634\u0627\u0621 \u0645\u062F\u062E\u0644 \u062C\u062F\u064A\u062F
+BusinessPaletteFactory.Data=\u0628\u064A\u0627\u0646\u0627\u062A
+BusinessPaletteFactory.Ellipse=\u0642\u0637\u0639 \u0646\u0627\u0642\u0635
+BusinessPaletteFactory.Input=\u0645\u062F\u062E\u0644
+BusinessPaletteFactory.Relationshop=\u0639\u0644\u0627\u0642\u0629
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0645\u0646\u0637\u0642\u064A
+BusinessPaletteFactory.decision=\u0642\u0631\u0627\u0631
+BusinessPaletteFactory.Document=\u0648\u062B\u064A\u0642\u0629
+BusinessPaletteFactory.CreateActor=\u0625\u0646\u0634\u0627\u0621 \u0645\u0645\u062B\u0644 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.StringDoubleConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0645\u0632\u062F\u0648\u062C\u0629
+BusinessPaletteFactory.Actor=\u0645\u0645\u062B\u0644
+BusinessCreationWizardPage.CreateBusinessDiagram=\u0625\u0646\u0634\u0627\u0621 \u0645\u062E\u0637\u0637 \u0623\u0639\u0645\u0627\u0644
+BusinessPaletteFactory.ListComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0627\u0626\u0645\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.DirectionalRelationShip=\u0639\u0644\u0627\u0642\u0629 \u0627\u062A\u062C\u0627\u0647
+BusinessPaletteFactory.Action=\u0627\u0644\u0639\u0645\u0644
+BusinessPaletteFactory.RelationshopComment=\u0625\u0646\u0634\u0627\u0621 \u0639\u0644\u0627\u0642\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessPaletteFactory.DecisionComment=\u0625\u0646\u0634\u0627\u0621 \u0642\u0631\u0627\u0631 \u062C\u062F\u064A\u062F
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0645\u0632\u062F\u0648\u062C
+BusinessPaletteFactory.CreateEllipse=\u0625\u0646\u0634\u0627\u0621 \u0642\u0637\u0639 \u0646\u0627\u0642\u0635
+BusinessNewDiagramFileWizard.DiagramFile=\u0645\u0644\u0641 \u0627\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.StringShortConverError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0642\u0635\u064A\u0631\u0629
+BusinessPaletteFactory.DocuemntComment=\u0625\u0646\u0634\u0627\u0621 \u0648\u062B\u064A\u0642\u0629 \u062C\u062F\u064A\u062F\u0629
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u0627\u0644\u0642\u064A\u0645\u0629 \u0627\u0644\u0645\u062A\u0648\u0642\u0639\u0629 \u0645\u0646 \u0627\u0644\u0646\u0648\u0639 \u0631\u0642\u0645 \u0635\u062D\u064A\u062D
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u0627\u062E\u062A\u0631 \u0639\u0646\u0635\u0631 \u062C\u0630\u0631\u064A \u0644\u0644\u0645\u062E\u0637\u0637
+BusinessAbstractParser.StringFloatConvertError=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0639\u0634\u0631\u064A\u0629
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=\u0644\u0627 \u064A\u0645\u0643\u0646 \u062A\u062D\u0648\u064A\u0644 \u0642\u064A\u0645\u0629 \u0646\u0635\u064A\u0629 \u0625\u0644\u0649 \u0642\u064A\u0645\u0629 \u0628\u0627\u064A\u062A
+DeleteAssignmentAction.DeleteAssignment=\u062D\u0630\u0641 \u062A\u0643\u0644\u064A\u0641
+BusinessDiagramEditor.canNotSaveTitle=\u062A\u062D\u0630\u064A\u0631

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_de.properties

@@ -1,25 +1,25 @@
 BusinessInitDiagramFileAction.DiagramFile=Diagramm-Datei
 BusinessAbstractParser.ValueOfLongIsExpected=Wert vom Typ Long wird erwartet
 BusinessAbstractParser.ValueOfFloatIsExpected=Float-Wert wird erwartet
-BusinessPaletteFactory.DataComment=Daten hinzuf\u00FCgen
+BusinessPaletteFactory.DataComment=Daten hinzufügen
 CreateDiagramAction.CreateBusinessModel=Erstelle Business Model
 BusinessCreationWizardPage.CreatenewBusinessDiagram=Neues Business-Diagramm erstellen
-BusinessAbstractParser.StringIntegerConvertError=String-Wert l\u00E4sst sich nicht in Integer-Wert umwandeln
-BusinessPaletteFactory.CreateGear=Zahnrad hinzuf\u00FCgen
+BusinessAbstractParser.StringIntegerConvertError=String-Wert lässt sich nicht in Integer-Wert umwandeln
+BusinessPaletteFactory.CreateGear=Zahnrad hinzufügen
 SimpleBusinessCreationWizardPage.Title=Neues Business Model
 BusinessNewDiagramFileWizard.CreateNewDiagram=Erstellt neues Diagramm auf Basis des {0} model Inhaltes
 BusinessAbstractParser.UnknownLiteral=Unbekanntes Zeichen:
-BusinessAbstractParser.StringLongConverError=String-Wert l\u00E4sst sich nicht in Long-Wert umwandeln
-AssignmentPropertySection.DeleteAssignment=Zuordnung l\u00F6schen
+BusinessAbstractParser.StringLongConverError=String-Wert lässt sich nicht in Long-Wert umwandeln
+AssignmentPropertySection.DeleteAssignment=Zuordnung löschen
 AssignmentPropertySection.Type=Typ
-BusinessModelingAssistantProvider.AvaiableDomainModelElements=Verf\u00FCgbare Domain-Model Elemente:
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Verfügbare Domain-Model Elemente:
 BusinessPaletteFactory.BidirectionalRelationShip=Bidirektionale Beziehung
-BusinessPaletteFactory.CreateDirectionalRelationShip=Direktionale Beziehung hinzuf\u00FCgen
-BusinessPaletteFactory.CreateBidirectionalRelationShip=Bidirektionale Beziehung hinzuf\u00FCgen
+BusinessPaletteFactory.CreateDirectionalRelationShip=Direktionale Beziehung hinzufügen
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Bidirektionale Beziehung hinzufügen
 AssignmentPropertySection.Name=Name
-CreateAssignmentCommand.CannotAssign=Zuordnung nicht m\u00F6glich.
+CreateAssignmentCommand.CannotAssign=Zuordnung nicht möglich.
 BusinessNewDiagramFileWizard.DiagramRootElement=Diagramm root-Element
-BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Kein Diagram-Root Element ausgew\u00E4hlt
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Kein Diagram-Root Element ausgewählt
 BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number: 
 OpenDiagramAction.EditBusinessModel=Business-Modell bearbeiten
 BusinessAbstractParser.ValueOfTypeByteIsExpected=Wert vom Typ Byte wird erwartet
@@ -27,19 +27,19 @@ BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Character-Wert erwarted
 BusinessPaletteFactory.ActionComment=Neue Action erzeugen
 BusinessAbstractParser.ValueOfTypeStringIsExpected=String-Wert erwartet
 BusinessInitDiagramFileAction.Error=Fehler
-BusinessNewDiagramFileWizard.SelectRootElement=Diagram-Root Element w\u00E4hlen
-RepositoryFactoryProxyLabelProvider.Deleted= (gel\u00F6scht)
-BusinessPaletteFactory.TerminalComment=Terminal hinzuf\u00FCgen
+BusinessNewDiagramFileWizard.SelectRootElement=Diagram-Root Element wählen
+RepositoryFactoryProxyLabelProvider.Deleted= (gelöscht)
+BusinessPaletteFactory.TerminalComment=Terminal hinzufügen
 BusinessAbstractParser.ValueOfShortIsExpected=Wert vom Typ Short wird erwartet
 BusinessPaletteFactory.DatabaseComment=Neue Datenbank erstellen
 AssignmentPropertySection.Comment=Kommentar
 SimpleBusinessCreationWizard.NewBusinessModel=Neues Business Model
-BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Ung\u00FCltiges Diagram-Root Element ausgew\u00E4hlt
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Ungültiges Diagram-Root Element ausgewählt
 BusinessInitDiagramFileAction.IntialNew=Neu initialisieren
 FindAssignmentAction.FindAssignments=Finde Zuordnungen
 RepositoryFactoryProxyLabelProvider.NotFound= (nicht gefunden)
 BusinessPaletteFactory.Terminal=Terminal
-BusinessAbstractParser.InvalidInputAt=Ung\u00FCltige Eingabe bei
+BusinessAbstractParser.InvalidInputAt=Ungültige Eingabe bei
 BusinessPaletteFactory.Gear=Verzweigung
 BusinessPaletteFactory.InputComment=Neue Eingabe erstellen
 BusinessPaletteFactory.Data=Daten
@@ -50,9 +50,9 @@ BusinessPaletteFactory.Relationshop=Beziehung
 BusinessAbstractParser.ValueOfBooleanIsExpected=Boolean-Wert erwartet
 BusinessPaletteFactory.decision=Entscheidung
 BusinessPaletteFactory.Document=Dokument
-BusinessModelingAssistantProvider.SelectDomainModelElement=W\u00E4hlen Sie ein domain model Element aus
-BusinessPaletteFactory.CreateActor=Akteur hinzuf\u00FCgen
-BusinessAbstractParser.StringDoubleConvertError=String-Wert l\u00E4sst sich nicht in Double-Wert umwandeln
+BusinessModelingAssistantProvider.SelectDomainModelElement=Wählen Sie ein domain model Element aus
+BusinessPaletteFactory.CreateActor=Akteur hinzufügen
+BusinessAbstractParser.StringDoubleConvertError=String-Wert lässt sich nicht in Double-Wert umwandeln
 BusinessPaletteFactory.Actor=Akteur
 EditAction.Edit=Bearbeite
 BusinessCreationWizardPage.CreateBusinessDiagram=Business-Diagramm erstellen
@@ -63,20 +63,20 @@ BusinessPaletteFactory.Action=Action
 BusinessPaletteFactory.RelationshopComment=Neue Beziehung erstellen
 SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
 BusinessInitDiagramFileAction.LoadFaild=Laden der Model-Datei fehlgeschlagen
-BusinessPaletteFactory.DecisionComment=Entscheidung hinzuf\u00FCgen
+BusinessPaletteFactory.DecisionComment=Entscheidung hinzufügen
 BusinessAbstractParser.ValueOfDoubleIsExpected=Double-Wert wird erwartet
 OpenDiagramAction.ReadBusinessModel=Lese Business Model
 BusinessInitDiagramFileAction.UnableToLoadResource=Ressource kann nicht geladen werden:
-BusinessPaletteFactory.CreateEllipse=Ellipse hinzuf\u00FCgen
+BusinessPaletteFactory.CreateEllipse=Ellipse hinzufügen
 BusinessNewDiagramFileWizard.DiagramFile=Diagramm Datei
-BusinessAbstractParser.StringShortConverError=String-Wert l\u00E4sst sich nicht in Short-Wert umwandeln
-BusinessPaletteFactory.DocuemntComment=Dokument hinzuf\u00FCgen
+BusinessAbstractParser.StringShortConverError=String-Wert lässt sich nicht in Short-Wert umwandeln
+BusinessPaletteFactory.DocuemntComment=Dokument hinzufügen
 BusinessAbstractParser.ValueOfIntegerIsExpected=Integer-Wert erwartet
-BusinessNewDiagramFileWizard.SelectDiagramRootElement=Diagram-Root Element w\u00E4hlen:
-BusinessNewDiagramFileWizard.SelectSemanticModelElement=W\u00E4hlen Sie das semantische Modell-Element aus zur Darstellung im Diagramm
-BusinessAbstractParser.StringFloatConvertError=String-Wert l\u00E4sst sich nicht in Float-Wert umwandeln
-BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String-Wert l\u00E4sst sich nicht in Byte-Wert umwandeln
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Diagram-Root Element wählen:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Wählen Sie das semantische Modell-Element aus zur Darstellung im Diagramm
+BusinessAbstractParser.StringFloatConvertError=String-Wert lässt sich nicht in Float-Wert umwandeln
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String-Wert lässt sich nicht in Byte-Wert umwandeln
 BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Neue Ecore-Diagramm-Datei initialisieren
 BusinessTooltipFigure.assignedMeta={0} zugewiesene Metadaten
-DeleteAssignmentAction.DeleteAssignment=Zuordnung l\u00F6schen
+DeleteAssignmentAction.DeleteAssignment=Zuordnung löschen
 BusinessDiagramEditor.canNotSaveTitle=Warnung

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_el.properties

@@ -0,0 +1,78 @@
+BusinessInitDiagramFileAction.DiagramFile=\u03B1\u03C1\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessAbstractParser.ValueOfLongIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Long \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessAbstractParser.ValueOfFloatIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Float \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.DataComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03BF\u03C5
+CreateDiagramAction.CreateBusinessModel=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessCreationWizardPage.CreatenewBusinessDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03B5\u03BD\u03CC\u03C2 \u03BD\u03AD\u03BF\u03C5 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2.
+BusinessAbstractParser.StringIntegerConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Integer
+SimpleBusinessCreationWizardPage.Title=\u039D\u03AD\u03BF \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF
+BusinessNewDiagramFileWizard.CreateNewDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2 \u03B2\u03B1\u03C3\u03B9\u03C3\u03BC\u03AD\u03BD\u03BF \u03C3\u03C4\u03BF \u03C0\u03B5\u03C1\u03B9\u03B5\u03C7\u03CC\u03BC\u03B5\u03BD\u03BF \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 {0}
+BusinessAbstractParser.StringLongConverError=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Long
+AssignmentPropertySection.DeleteAssignment=\u0394\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2
+AssignmentPropertySection.Type=\u03A4\u03CD\u03C0\u03BF\u03C2
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u0394\u03B9\u03B1\u03B8\u03AD\u03C3\u03B9\u03BC\u03B1 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03B1 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03C4\u03BF\u03BC\u03AD\u03B1:
+BusinessPaletteFactory.BidirectionalRelationShip=\u0391\u03BC\u03C6\u03AF\u03B4\u03C1\u03BF\u03BC\u03B7 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessPaletteFactory.CreateDirectionalRelationShip=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u039A\u03B1\u03C4\u03B5\u03C5\u03B8\u03C5\u03BD\u03CC\u03BC\u03B5\u03BD\u03B7\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+BusinessPaletteFactory.CreateBidirectionalRelationShip=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0391\u03BC\u03C6\u03AF\u03B4\u03C1\u03BF\u03BC\u03B7\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+AssignmentPropertySection.Name=\u038C\u03BD\u03BF\u03BC\u03B1
+CreateAssignmentCommand.CannotAssign=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2.
+BusinessNewDiagramFileWizard.DiagramRootElement=\u0392\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u0394\u03B5\u03BD \u03AD\u03C7\u03B5\u03B9 \u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03B5\u03AF \u03B2\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessVisualIDRegistry.ParseError=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03B1\u03BD\u03AC\u03BB\u03C5\u03C3\u03B7\u03C2 \u03C4\u03CD\u03C0\u03BF\u03C5 \u03C0\u03C1\u03BF\u03B2\u03BF\u03BB\u03AE\u03C2 \u03C9\u03C2 \u03AD\u03BD\u03B1\u03BD \u03BF\u03C0\u03C4\u03B9\u03BA\u03CC \u03B1\u03C1\u03B9\u03B8\u03BC\u03CC \u03C4\u03B1\u03C5\u03C4\u03CC\u03C4\u03B7\u03C4\u03B1\u03C2:
+OpenDiagramAction.EditBusinessModel=\u0395\u03C0\u03B5\u03BE\u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessAbstractParser.ValueOfTypeByteIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Byte \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Character \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.ActionComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0394\u03C1\u03AC\u03C3\u03B7\u03C2
+BusinessAbstractParser.ValueOfTypeStringIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 String \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessInitDiagramFileAction.Error=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1
+BusinessNewDiagramFileWizard.SelectRootElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03B2\u03B1\u03C3\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03B1\u03C4\u03BF\u03C2
+RepositoryFactoryProxyLabelProvider.Deleted=(\u0394\u03B9\u03B1\u03B3\u03C1\u03AC\u03C6\u03C4\u03B7\u03BA\u03B5)
+BusinessPaletteFactory.TerminalComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u03A4\u03B5\u03C1\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD
+BusinessAbstractParser.ValueOfShortIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Short \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.DatabaseComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0392\u03AC\u03C3\u03B7\u03C2 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+AssignmentPropertySection.Comment=\u03A3\u03C7\u03CC\u03BB\u03B9\u03BF
+SimpleBusinessCreationWizard.NewBusinessModel=\u039D\u03AD\u03BF \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u0395\u03C0\u03B9\u03BB\u03AD\u03C7\u03B8\u03B7\u03BA\u03B5 \u03BC\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03BF \u03B2\u03B1\u03C3\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessInitDiagramFileAction.IntialNew=\u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u03BD\u03AD\u03BF\u03C5
+FindAssignmentAction.FindAssignments=\u0395\u03CD\u03C1\u03B5\u03C3\u03B7 \u0391\u03BD\u03B1\u03B8\u03AD\u03C3\u03B5\u03C9\u03BD
+RepositoryFactoryProxyLabelProvider.NotFound=(\u0394\u03B5 \u0392\u03C1\u03AD\u03B8\u03B7\u03BA\u03B5)
+BusinessPaletteFactory.Terminal=\u03A4\u03B5\u03C1\u03BC\u03B1\u03C4\u03B9\u03BA\u03CC
+BusinessAbstractParser.InvalidInputAt=\u039C\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03B7 \u03B5\u03AF\u03C3\u03BF\u03B4\u03BF\u03C2 \u03C3\u03B5
+BusinessPaletteFactory.InputComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0395\u03B9\u03C3\u03CC\u03B4\u03BF\u03C5
+BusinessPaletteFactory.Data=\u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1
+BusinessPaletteFactory.Ellipse=\u0388\u03BB\u03BB\u03B5\u03B9\u03C8\u03B7
+BusinessPaletteFactory.Input=\u0395\u03AF\u03C3\u03BF\u03B4\u03BF\u03C2
+BusinessPaletteFactory.List=\u039B\u03AF\u03C3\u03C4\u03B1
+BusinessPaletteFactory.Relationshop=\u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Boolean \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessPaletteFactory.decision=\u0391\u03C0\u03CC\u03C6\u03B1\u03C3\u03B7
+BusinessPaletteFactory.Document=\u0388\u03B3\u03B3\u03C1\u03B1\u03C6\u03BF
+BusinessModelingAssistantProvider.SelectDomainModelElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03C4\u03BF\u03BC\u03AD\u03B1
+BusinessPaletteFactory.CreateActor=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0394\u03C1\u03AC\u03C3\u03C4\u03B7
+BusinessAbstractParser.StringDoubleConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Double
+BusinessPaletteFactory.Actor=\u0394\u03C1\u03AC\u03C3\u03C4\u03B7\u03C2
+EditAction.Edit=\u03B5\u03C0\u03B5\u03BE\u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1
+BusinessCreationWizardPage.CreateBusinessDiagram=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03B5\u03BD\u03CC\u03C2 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03BA\u03BF\u03CD \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessPaletteFactory.Database=\u03A0\u03B7\u03B3\u03AE \u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+BusinessPaletteFactory.ListComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u039B\u03AF\u03C3\u03C4\u03B1\u03C2
+BusinessPaletteFactory.DirectionalRelationShip=\u039A\u03B1\u03C4\u03B5\u03C5\u03B8\u03C5\u03BD\u03CC\u03BC\u03B5\u03BD\u03B7 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7
+BusinessPaletteFactory.Action=\u0394\u03C1\u03AC\u03C3\u03B7
+BusinessPaletteFactory.RelationshopComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u03A3\u03C5\u03C3\u03C7\u03AD\u03C4\u03B9\u03C3\u03B7\u03C2
+BusinessInitDiagramFileAction.LoadFaild=\u0391\u03C0\u03BF\u03C4\u03C5\u03C7\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessPaletteFactory.DecisionComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0391\u03C0\u03CC\u03C6\u03B1\u03C3\u03B7\u03C2
+BusinessAbstractParser.ValueOfDoubleIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Double \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+OpenDiagramAction.ReadBusinessModel=\u0391\u03BD\u03AC\u03B3\u03BD\u03C9\u03C3\u03B7 \u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03BC\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5
+BusinessInitDiagramFileAction.UnableToLoadResource=\u0391\u03B4\u03CD\u03BD\u03B1\u03C4\u03BF \u03BD\u03B1 \u03C6\u03BF\u03C1\u03C4\u03C9\u03B8\u03B5\u03AF \u03BF \u03C0\u03CC\u03C1\u03BF\u03C2:
+BusinessPaletteFactory.CreateEllipse=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03B1\u03C2 \u0388\u03BB\u03BB\u03B5\u03B9\u03C8\u03B7\u03C2
+BusinessNewDiagramFileWizard.DiagramFile=\u0391\u03C1\u03C7\u03B5\u03AF\u03BF \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2
+BusinessAbstractParser.StringShortConverError=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Short
+BusinessPaletteFactory.DocuemntComment=\u0394\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03BD\u03AD\u03BF\u03C5 \u0395\u03B3\u03B3\u03C1\u03AC\u03C6\u03BF\u03C5
+BusinessAbstractParser.ValueOfIntegerIsExpected=\u03A4\u03B9\u03BC\u03AE \u03C4\u03CD\u03C0\u03BF\u03C5 Integer \u03B1\u03BD\u03B1\u03BC\u03AD\u03BD\u03B5\u03C4\u03B1\u03B9
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03B2\u03B1\u03C3\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03B1\u03C4\u03BF\u03C2:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5 \u03C3\u03B7\u03BC\u03B1\u03C3\u03B9\u03BF\u03BB\u03BF\u03B3\u03B9\u03BA\u03BF\u03CD \u03BC\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF\u03C5 \u03B3\u03B9\u03B1 \u03B5\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C3\u03C4\u03BF \u03B4\u03B9\u03AC\u03B3\u03C1\u03B1\u03BC\u03BC\u03B1
+BusinessAbstractParser.StringFloatConvertError=\u0397 \u03C4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=\u03A4\u03B9\u03BC\u03AE String \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03B5\u03AF \u03BD\u03B1 \u03BC\u03B5\u03C4\u03B1\u03C4\u03C1\u03B1\u03C0\u03B5\u03AF \u03C3\u03B5 \u03C4\u03B9\u03BC\u03AE Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u03BD\u03AD\u03BF\u03C5 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B4\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03BF\u03C2 Ecore
+BusinessTooltipFigure.assignedMeta={0} \u03BA\u03B1\u03B8\u03BF\u03C1\u03B9\u03C3\u03BC\u03AD\u03BD\u03B1 \u039C\u03B5\u03C4\u03B1\u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1
+DeleteAssignmentAction.DeleteAssignment=\u0394\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE \u0391\u03BD\u03AC\u03B8\u03B5\u03C3\u03B7\u03C2
+BusinessDiagramEditor.canNotSaveTitle=\u03A0\u03C1\u03BF\u03B5\u03B9\u03B4\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_en.properties

@@ -8,7 +8,7 @@ BusinessAbstractParser.StringIntegerConvertError=String value cannot be converte
 BusinessPaletteFactory.CreateGear=Create new Gear
 SimpleBusinessCreationWizardPage.Title=New Business Model
 BusinessNewDiagramFileWizard.CreateNewDiagram=Create new diagram based on {0}  model content
-BusinessAbstractParser.UnknownLiteral=Unknown literal:
+BusinessAbstractParser.UnknownLiteral=Unknown literal: 
 BusinessAbstractParser.StringLongConverError=String value cannot be converted to Long value
 AssignmentPropertySection.DeleteAssignment=Delete Assignment
 AssignmentPropertySection.Type=Type
@@ -20,7 +20,7 @@ AssignmentPropertySection.Name=Name
 CreateAssignmentCommand.CannotAssign=Cannot Assign.
 BusinessNewDiagramFileWizard.DiagramRootElement=Diagram root element
 BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=No diagram root element selected
-BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number:
+BusinessVisualIDRegistry.ParseError=Unable to parse view type as a visualID number: 
 OpenDiagramAction.EditBusinessModel=Edit Business Model
 BusinessAbstractParser.ValueOfTypeByteIsExpected=Value of type Byte is expected
 BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Value of type Character is expected
@@ -35,11 +35,11 @@ BusinessPaletteFactory.DatabaseComment=Create new Database
 AssignmentPropertySection.Comment=Comment
 SimpleBusinessCreationWizard.NewBusinessModel=New Business Model
 BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Invalid diagram root element was selected
-BusinessInitDiagramFileAction.IntialNew=Initialize new
+BusinessInitDiagramFileAction.IntialNew=Initialize new 
 FindAssignmentAction.FindAssignments=Find Assignments
 RepositoryFactoryProxyLabelProvider.NotFound= (Not Found)
 BusinessPaletteFactory.Terminal=Terminal
-BusinessAbstractParser.InvalidInputAt=Invalid input at
+BusinessAbstractParser.InvalidInputAt=Invalid input at 
 BusinessPaletteFactory.Gear=Gear
 BusinessPaletteFactory.InputComment=Create new Input
 BusinessPaletteFactory.Data=Data
@@ -54,7 +54,7 @@ BusinessModelingAssistantProvider.SelectDomainModelElement=Select domain model e
 BusinessPaletteFactory.CreateActor=Create new Actor
 BusinessAbstractParser.StringDoubleConvertError=String value cannot be converted to Double value
 BusinessPaletteFactory.Actor=Actor
-EditAction.Edit=Edit
+EditAction.Edit=Edit 
 BusinessCreationWizardPage.CreateBusinessDiagram=Create a Business diagram
 BusinessPaletteFactory.Database=Datasource
 BusinessPaletteFactory.ListComment=Create new List
@@ -66,7 +66,7 @@ BusinessInitDiagramFileAction.LoadFaild=Model file loading failed
 BusinessPaletteFactory.DecisionComment=Create new Decision
 BusinessAbstractParser.ValueOfDoubleIsExpected=Value of type Double is expected
 OpenDiagramAction.ReadBusinessModel=Read Business Model
-BusinessInitDiagramFileAction.UnableToLoadResource=Unable to load resource:
+BusinessInitDiagramFileAction.UnableToLoadResource=Unable to load resource: 
 BusinessPaletteFactory.CreateEllipse=Create new Ellipse
 BusinessNewDiagramFileWizard.DiagramFile=Diagram file
 BusinessAbstractParser.StringShortConverError=String value cannot be converted to Short value

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_es.properties

@@ -4,15 +4,15 @@ BusinessAbstractParser.StringIntegerConvertError=Valor del String no puede ser c
 BusinessAbstractParser.UnknownLiteral=Literal desconocido
 BusinessAbstractParser.StringLongConverError=Valor del String no puede ser convertido a Long
 AssignmentPropertySection.Type=Tipo
-BusinessPaletteFactory.BidirectionalRelationShip=Relaci\u00F3n bidireccional
-BusinessPaletteFactory.CreateDirectionalRelationShip=Crear nueva relaci\u00F3n direccional
-BusinessPaletteFactory.CreateBidirectionalRelationShip=Crear nueva relaci\u00F3n bidireccional
+BusinessPaletteFactory.BidirectionalRelationShip=Relación bidireccional
+BusinessPaletteFactory.CreateDirectionalRelationShip=Crear nueva relación direccional
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Crear nueva relación bidireccional
 AssignmentPropertySection.Name=Nombre
 BusinessNewDiagramFileWizard.DiagramRootElement=Elemento de diagrama principal
 BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=No se ha seleccionado elemento del diagrama principal
 BusinessAbstractParser.ValueOfTypeByteIsExpected=Se esperaba un valor de tipo Byte
 BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Se esperaba un valor de tipo Character
-BusinessPaletteFactory.ActionComment=Crear nueva acci\u00F3n
+BusinessPaletteFactory.ActionComment=Crear nueva acción
 BusinessAbstractParser.ValueOfTypeStringIsExpected=Se esperaba un valor de tipo String
 BusinessInitDiagramFileAction.Error=Error
 BusinessNewDiagramFileWizard.SelectRootElement=Seleccione un elemento del diagrama principal
@@ -26,7 +26,7 @@ BusinessPaletteFactory.InputComment=Crear nueva Entrada
 BusinessPaletteFactory.Data=Fecha
 BusinessPaletteFactory.Input=Entrada
 BusinessPaletteFactory.List=Lista
-BusinessPaletteFactory.Relationshop=Relaci\u00F3n
+BusinessPaletteFactory.Relationshop=Relación
 BusinessAbstractParser.ValueOfBooleanIsExpected=Se esperaba un valor de tipo Boolean
 BusinessPaletteFactory.decision=Decision
 BusinessPaletteFactory.Document=Documento
@@ -35,8 +35,8 @@ BusinessAbstractParser.StringDoubleConvertError=Valor del String no puede ser co
 BusinessPaletteFactory.Actor=Actor
 BusinessPaletteFactory.Database=Base de Datos
 BusinessPaletteFactory.ListComment=Crear nueva Lista
-BusinessPaletteFactory.Action=Acci\u00F3n
-BusinessPaletteFactory.RelationshopComment=Crear nueva relaci\u00F3n
+BusinessPaletteFactory.Action=Acción
+BusinessPaletteFactory.RelationshopComment=Crear nueva relación
 BusinessAbstractParser.ValueOfDoubleIsExpected=Se esperaba un valor de tipo Double
 BusinessPaletteFactory.CreateEllipse=Crear nueva Elipse
 BusinessNewDiagramFileWizard.DiagramFile=Archivo de diagrama

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_fr.properties

@@ -1,82 +1,82 @@
 BusinessInitDiagramFileAction.DiagramFile=Fichier diagramme
 BusinessAbstractParser.ValueOfLongIsExpected=Une valeur de type Long est attendue
 BusinessAbstractParser.ValueOfFloatIsExpected=Une valeur de type Float est attendue
-BusinessPaletteFactory.DataComment=Cr\u00E9er des nouvelles donn\u00E9es
-CreateDiagramAction.CreateBusinessModel=Cr\u00E9er un Business Model
-BusinessCreationWizardPage.CreatenewBusinessDiagram=Cr\u00E9er un nouveau sch\u00E9ma m\u00E9tier
-BusinessAbstractParser.StringIntegerConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Integer
+BusinessPaletteFactory.DataComment=Créer des nouvelles données
+CreateDiagramAction.CreateBusinessModel=Créer un Business Model
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Créer un nouveau schéma métier
+BusinessAbstractParser.StringIntegerConvertError=Une valeur de chaîne ne peut pas être convertie en valeur Integer
 SimpleBusinessCreationWizardPage.Title=Nouveau Business Model
-BusinessNewDiagramFileWizard.CreateNewDiagram=Cr\u00E9er un nouveau diagramme bas\u00E9 sur le contenu du mod\u00E8le {0}
-BusinessAbstractParser.UnknownLiteral=Litt\u00E9rale inconnue :
-BusinessAbstractParser.StringLongConverError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Long
+BusinessNewDiagramFileWizard.CreateNewDiagram=Créer un nouveau diagramme basé sur le contenu du modèle {0}
+BusinessAbstractParser.UnknownLiteral=Littérale inconnue :
+BusinessAbstractParser.StringLongConverError=Une valeur de chaîne ne peut pas être convertie en valeur Long
 AssignmentPropertySection.DeleteAssignment=Effacer l'affectation.
 AssignmentPropertySection.Type=Type
-BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u00C9l\u00E9ments de mod\u00E8le de domaine disponibles :
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Éléments de modèle de domaine disponibles :
 BusinessPaletteFactory.BidirectionalRelationShip=Relation Bidirectionnelle
-BusinessPaletteFactory.CreateDirectionalRelationShip=Cr\u00E9er une nouvelle relation directionnelle
-BusinessPaletteFactory.CreateBidirectionalRelationShip=Cr\u00E9er une nouvelle relation bidirectionnelle
+BusinessPaletteFactory.CreateDirectionalRelationShip=Créer une nouvelle relation directionnelle
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Créer une nouvelle relation bidirectionnelle
 AssignmentPropertySection.Name=Nom
 CreateAssignmentCommand.CannotAssign=Impossible d'assigner.
-BusinessNewDiagramFileWizard.DiagramRootElement=\u00C9l\u00E9ment racine du diagramme
-BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Aucun \u00E9l\u00E9ment racine de diagramme s\u00E9lectionn\u00E9.
-BusinessVisualIDRegistry.ParseError=Impossible d'analyser le type de vue en tant que num\u00E9ro idVisuel 
-OpenDiagramAction.EditBusinessModel=Editer le Business mod\u00E8le
+BusinessNewDiagramFileWizard.DiagramRootElement=Élément racine du diagramme
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Aucun élément racine de diagramme sélectionné.
+BusinessVisualIDRegistry.ParseError=Impossible d'analyser le type de vue en tant que numéro idVisuel 
+OpenDiagramAction.EditBusinessModel=Editer le Business modèle
 BusinessAbstractParser.ValueOfTypeByteIsExpected=Une valeur de type Byte est attendue
 BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Une valeur de type Character est attendue
-BusinessPaletteFactory.ActionComment=Cr\u00E9er une nouvelle action
+BusinessPaletteFactory.ActionComment=Créer une nouvelle action
 BusinessAbstractParser.ValueOfTypeStringIsExpected=Une valeur de type String est attendue
 BusinessInitDiagramFileAction.Error=ERROR
-BusinessNewDiagramFileWizard.SelectRootElement=S\u00E9lectionnez un \u00E9l\u00E9ment racine de diagramme
-RepositoryFactoryProxyLabelProvider.Deleted=(Supprim\u00E9)
-BusinessPaletteFactory.TerminalComment=Cr\u00E9er un nouveau Terminal
+BusinessNewDiagramFileWizard.SelectRootElement=Sélectionnez un élément racine de diagramme
+RepositoryFactoryProxyLabelProvider.Deleted=(Supprimé)
+BusinessPaletteFactory.TerminalComment=Créer un nouveau Terminal
 BusinessAbstractParser.ValueOfShortIsExpected=Une valeur de type Short est attendue
-BusinessPaletteFactory.DatabaseComment=Cr\u00E9er une nouvelle base de donn\u00E9es
+BusinessPaletteFactory.DatabaseComment=Créer une nouvelle base de données
 AssignmentPropertySection.Comment=Commentaire
 SimpleBusinessCreationWizard.NewBusinessModel=Nouveau Business Model
-BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Un \u00E9l\u00E9ment racine de diagramme non valide a \u00E9t\u00E9 s\u00E9lectionn\u00E9.
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Un élément racine de diagramme non valide a été sélectionné.
 BusinessInitDiagramFileAction.IntialNew=Initialiser nouveau
 FindAssignmentAction.FindAssignments=Rechercher des affectations
-RepositoryFactoryProxyLabelProvider.NotFound=(Non trouv\u00E9)
+RepositoryFactoryProxyLabelProvider.NotFound=(Non trouvé)
 BusinessPaletteFactory.Terminal=Terminal
-BusinessAbstractParser.InvalidInputAt=Entr\u00E9e invalide \u00E0
+BusinessAbstractParser.InvalidInputAt=Entrée invalide à
 BusinessPaletteFactory.Gear=Transformation
-BusinessPaletteFactory.InputComment=Cr\u00E9er une nouvelle entr\u00E9e
-BusinessPaletteFactory.Data=Donn\u00E9es
+BusinessPaletteFactory.InputComment=Créer une nouvelle entrée
+BusinessPaletteFactory.Data=Données
 BusinessPaletteFactory.Ellipse=Ellipse
 BusinessPaletteFactory.Input=Lecture
 BusinessPaletteFactory.List=liste
 BusinessPaletteFactory.Relationshop=Relation
 BusinessAbstractParser.ValueOfBooleanIsExpected=Une valeur de type Boolean est attendue
-BusinessPaletteFactory.decision=D\u00E9cision
+BusinessPaletteFactory.decision=Décision
 BusinessPaletteFactory.Document=Document
-BusinessModelingAssistantProvider.SelectDomainModelElement=S\u00E9lectionner l'\u00E9l\u00E9ment domaine du mod\u00E8le
-BusinessPaletteFactory.CreateActor=Cr\u00E9er un nouvel acteur
-BusinessAbstractParser.StringDoubleConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Double
+BusinessModelingAssistantProvider.SelectDomainModelElement=Sélectionner l'élément domaine du modèle
+BusinessPaletteFactory.CreateActor=Créer un nouvel acteur
+BusinessAbstractParser.StringDoubleConvertError=Une valeur de chaîne ne peut pas être convertie en valeur Double
 BusinessPaletteFactory.Actor=Acteur
-EditAction.Edit=Modifier
-BusinessCreationWizardPage.CreateBusinessDiagram=Cr\u00E9er un sch\u00E9ma m\u00E9tier
-BusinessPaletteFactory.Database=Source des donn\u00E9es
-BusinessPaletteFactory.ListComment=Cr\u00E9er une nouvelle liste
+EditAction.Edit=Editer
+BusinessCreationWizardPage.CreateBusinessDiagram=Créer un schéma métier
+BusinessPaletteFactory.Database=Source des données
+BusinessPaletteFactory.ListComment=Créer une nouvelle liste
 BusinessPaletteFactory.DirectionalRelationShip=Relation
 BusinessPaletteFactory.Action=Action
-BusinessPaletteFactory.RelationshopComment=Cr\u00E9er une nouvelle relation
+BusinessPaletteFactory.RelationshopComment=Créer une nouvelle relation
 SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
 BusinessInitDiagramFileAction.LoadFaild=Echec de chargement du fichier Model :
-BusinessPaletteFactory.DecisionComment=Cr\u00E9er une nouvelle D\u00E9cision
+BusinessPaletteFactory.DecisionComment=Créer une nouvelle Décision
 BusinessAbstractParser.ValueOfDoubleIsExpected=Une valeur de type Double est attendue
-OpenDiagramAction.ReadBusinessModel=Lire le Business mod\u00E8le
+OpenDiagramAction.ReadBusinessModel=Lire le Business modèle
 BusinessInitDiagramFileAction.UnableToLoadResource=Impossible de charger la ressource :
-BusinessPaletteFactory.CreateEllipse=Cr\u00E9er une nouvelle ellipse
+BusinessPaletteFactory.CreateEllipse=Créer une nouvelle ellipse
 BusinessNewDiagramFileWizard.DiagramFile=Fichier du diagramme
-BusinessAbstractParser.StringShortConverError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Short
-BusinessPaletteFactory.DocuemntComment=Cr\u00E9er un nouveau document
+BusinessAbstractParser.StringShortConverError=Une valeur de chaîne ne peut pas être convertie en valeur Short
+BusinessPaletteFactory.DocuemntComment=Créer un nouveau document
 BusinessAbstractParser.ValueOfIntegerIsExpected=Une valeur de type Integer est attendue
-BusinessNewDiagramFileWizard.SelectDiagramRootElement=S\u00E9lectionner un \u00E9l\u00E9ment racine de diagramme :
-BusinessNewDiagramFileWizard.SelectSemanticModelElement=S\u00E9lectionnez un \u00E9l\u00E9ment mod\u00E8le s\u00E9mantique \u00E0 repr\u00E9senter dans le diagramme
-BusinessAbstractParser.StringFloatConvertError=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Float
-BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Une valeur de cha\u00EEne ne peut pas \u00EAtre convertie en valeur Byte
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Sélectionner un élément racine de diagramme :
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Sélectionnez un élément modèle sémantique à représenter dans le diagramme
+BusinessAbstractParser.StringFloatConvertError=Une valeur de chaîne ne peut pas être convertie en valeur Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Une valeur de chaîne ne peut pas être convertie en valeur Byte
 BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Initialiser un nouveau fichier diagramme Ecore
-BusinessTooltipFigure.assignedMeta={0} M\u00E9tadonn\u00E9e affect\u00E9e
+BusinessTooltipFigure.assignedMeta={0} Métadonnée affectée
 DeleteAssignmentAction.DeleteAssignment=Effacer l'affectation
 BusinessDiagramEditor.canNotSaveTitle=Avertissement
 BusinessRulersAndGridComposite.Grid_On_Label_Text=Show Grid

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_hr.properties

@@ -0,0 +1,67 @@
+BusinessInitDiagramFileAction.DiagramFile=datoteka s dijagramom
+BusinessAbstractParser.ValueOfLongIsExpected=O\u010Dekuje se vrijednost tipa Long
+BusinessAbstractParser.ValueOfFloatIsExpected=O\u010Dekuje se vrijednost tipa Float
+BusinessPaletteFactory.DataComment=Kreiraj nove podatke
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Kreiraj novi poslovni dijagram.
+BusinessAbstractParser.StringIntegerConvertError=String nije mogu\u0107e konvertirati u Integer
+BusinessPaletteFactory.CreateGear=Kreiraj novi Gear
+BusinessNewDiagramFileWizard.CreateNewDiagram=Kreiraj novi dijagram na temelju sadr\u017Eaja modela {0}
+BusinessAbstractParser.UnknownLiteral=Nepoznat navod:
+BusinessAbstractParser.StringLongConverError=String nije mogu\u0107e konvertirati u Long
+AssignmentPropertySection.DeleteAssignment=Izbri\u0161i pridru\u017Eivanje
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Raspolo\u017Eivi elementi domenskog modela:
+BusinessPaletteFactory.BidirectionalRelationShip=Bidirekcijska veza
+BusinessPaletteFactory.CreateDirectionalRelationShip=Kreiraj novu direkcijsku vezu
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Kreiraj novu bidirekcijsku vezu
+AssignmentPropertySection.Name=Ime
+CreateAssignmentCommand.CannotAssign=Ne mogu pridru\u017Eiti.
+BusinessNewDiagramFileWizard.DiagramRootElement=Korjenski element dijagrama
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Nije odabran korjenski element dijagrama
+BusinessAbstractParser.ValueOfTypeByteIsExpected=O\u010Dekuje se vrijednost tipa Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=O\u010Dekuje se vrijednost tipa Character
+BusinessPaletteFactory.ActionComment=Kreiraj novu aktivnost
+BusinessAbstractParser.ValueOfTypeStringIsExpected=O\u010Dekuje se vrijednost tipa String
+BusinessInitDiagramFileAction.Error=Gre\u0161ka
+BusinessNewDiagramFileWizard.SelectRootElement=Odaberi korjenski element dijagrama
+BusinessPaletteFactory.TerminalComment=Kreiraj novi terminal
+BusinessAbstractParser.ValueOfShortIsExpected=O\u010Dekuje se vrijednost tipa Short
+BusinessPaletteFactory.DatabaseComment=Kreiraj novu bazu podataka
+AssignmentPropertySection.Comment=Komentar
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Odabra je neispravan korjenski element dijagrama
+BusinessInitDiagramFileAction.IntialNew=Inicijaliziraj novi
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Pogre\u0161an unos na
+BusinessPaletteFactory.Gear=Gear
+BusinessPaletteFactory.InputComment=Kreiraj novi unos
+BusinessPaletteFactory.Data=Podaci
+BusinessPaletteFactory.Input=Unos
+BusinessPaletteFactory.Relationshop=Veza
+BusinessAbstractParser.ValueOfBooleanIsExpected=O\u010Dekuje se vrijednost tipa Boolean
+BusinessPaletteFactory.decision=Odluka
+BusinessPaletteFactory.Document=Dokument
+BusinessModelingAssistantProvider.SelectDomainModelElement=Odaberi element domenskog modela
+BusinessPaletteFactory.CreateActor=Kreiraj novog aktera
+BusinessAbstractParser.StringDoubleConvertError=String nije mogu\u0107e konvertirati u Double
+BusinessPaletteFactory.Actor=Akter
+BusinessCreationWizardPage.CreateBusinessDiagram=Kreiraj poslovni dijagram
+BusinessPaletteFactory.Database=Izvor podataka
+BusinessPaletteFactory.ListComment=Kreiraj novu listu
+BusinessPaletteFactory.DirectionalRelationShip=Direkcijska veza
+BusinessPaletteFactory.Action=Aktivnost
+BusinessPaletteFactory.RelationshopComment=Kreiraj novu vezu
+BusinessInitDiagramFileAction.LoadFaild=U\u010Ditavanje datoteke za Model nije uspjelo
+BusinessPaletteFactory.DecisionComment=Kreiraj novu odluku
+BusinessAbstractParser.ValueOfDoubleIsExpected=O\u010Dekuje se vrijednost tipa Double
+BusinessInitDiagramFileAction.UnableToLoadResource=Ne mogu u\u010Ditati resurse:
+BusinessPaletteFactory.CreateEllipse=Kreiraj novi Ellipse
+BusinessNewDiagramFileWizard.DiagramFile=Datoteka dijagrama
+BusinessAbstractParser.StringShortConverError=String nije mogu\u0107e konvertirati u Short
+BusinessPaletteFactory.DocuemntComment=Kreiraj novi dokument
+BusinessAbstractParser.ValueOfIntegerIsExpected=O\u010Dekuje se vrijednost tipa integer
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Odaberi korjenski element dijagrama:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Prikazati ozna\u010Deni element semanti\u010Dkog modela na dijagramu
+BusinessAbstractParser.StringFloatConvertError=String nije mogu\u0107e konvertirati u Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String nije mogu\u0107e konvertirati u Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Inicijaliziranje nove datoteke za  Ecore dijagram
+DeleteAssignmentAction.DeleteAssignment=Izbri\u0161i pridru\u017Eivanje
+BusinessDiagramEditor.canNotSaveTitle=Upozorenje

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_it.properties

@@ -17,7 +17,7 @@ BusinessPaletteFactory.BidirectionalRelationShip=Relazione bidirezionale
 BusinessPaletteFactory.CreateDirectionalRelationShip=Creare uno nuova relazione
 BusinessPaletteFactory.CreateBidirectionalRelationShip=Crea una nuova relazione bidirezionale
 AssignmentPropertySection.Name=Nome
-CreateAssignmentCommand.CannotAssign=Non pu\u00F2 essere assegnato.
+CreateAssignmentCommand.CannotAssign=Non può essere assegnato.
 BusinessNewDiagramFileWizard.DiagramRootElement=Elemento radice del diagramma
 BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Nessun elemento base di diagramma selezionato
 BusinessVisualIDRegistry.ParseError=Impossibile analizzare la vista come un tipo numero visualID:
@@ -33,7 +33,7 @@ BusinessAbstractParser.ValueOfShortIsExpected=Previsto valore di tipo Short
 BusinessPaletteFactory.DatabaseComment=Crea una nuova banca dati
 AssignmentPropertySection.Comment=Commento
 SimpleBusinessCreationWizard.NewBusinessModel=Nuovo modello Business
-BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u00C8 stato selezionato un elemento principale non valido.
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=È stato selezionato un elemento principale non valido.
 BusinessInitDiagramFileAction.IntialNew=Nuova inizializzazione
 RepositoryFactoryProxyLabelProvider.NotFound=(Non trovato)
 BusinessPaletteFactory.Terminal=Terminale
@@ -70,7 +70,7 @@ BusinessAbstractParser.StringShortConverError=Valore String non convertito in va
 BusinessPaletteFactory.DocuemntComment=Creare un nuovo documento
 BusinessAbstractParser.ValueOfIntegerIsExpected=Previsto valore di tipo Intero
 BusinessNewDiagramFileWizard.SelectDiagramRootElement=Selezionare elemento principale diagramma:
-BusinessNewDiagramFileWizard.SelectSemanticModelElement=\r\nSeleziona l'elemento modello semantico da raffigurare nel diagramma
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=
 \nSeleziona l'elemento modello semantico da raffigurare nel diagramma
 BusinessAbstractParser.StringFloatConvertError=Valore String non convertito in valore Float
 BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Valore String non convertito in valore Byte

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ja.properties

@@ -69,13 +69,13 @@ OpenDiagramAction.ReadBusinessModel=\u30D3\u30B8\u30CD\u30B9\u30E2\u30C7\u30EB\u
 BusinessInitDiagramFileAction.UnableToLoadResource=\u30EA\u30BD\u30FC\u30B9\u3092\u30ED\u30FC\u30C9\u3067\u304D\u307E\u305B\u3093 :
 BusinessPaletteFactory.CreateEllipse=\u65B0\u898F\u6955\u5186\u306E\u4F5C\u6210
 BusinessNewDiagramFileWizard.DiagramFile=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30D5\u30A1\u30A4\u30EB
-BusinessAbstractParser.StringShortConverError=String\u5024\u3092Short\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessAbstractParser.StringShortConverError=String \u5024\u3092 Short \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
 BusinessPaletteFactory.DocuemntComment=\u65B0\u898F\u30C9\u30AD\u30E5\u30E1\u30F3\u30C8\u306E\u4F5C\u6210
 BusinessAbstractParser.ValueOfIntegerIsExpected=Integer \u578B\u306E\u5024\u304C\u671F\u5F85\u3055\u308C\u3066\u3044\u307E\u3059
 BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u30EB\u30FC\u30C8\u30A8\u30EC\u30E1\u30F3\u30C8\u306E\u9078\u629E:
 BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u30C0\u30A4\u30A2\u30B0\u30E9\u30E0\u306B\u8868\u3059\u30BB\u30DE\u30F3\u30C6\u30A3\u30C3\u30AF\u30E2\u30C7\u30EB\u30A8\u30EC\u30E1\u30F3\u30C8\u3092\u9078\u629E
-BusinessAbstractParser.StringFloatConvertError=String\u5024\u3092Float\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
-BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String\u5024\u3092Byte\u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessAbstractParser.StringFloatConvertError=String \u5024\u3092 Float \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String \u5024\u3092 Byte \u5024\u306B\u5909\u63DB\u3067\u304D\u307E\u305B\u3093
 BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u65B0\u898F Ecore \u30C0\u30A4\u30A2\u30B0\u30E9\u30E0 \u30D5\u30A1\u30A4\u30EB\u306E\u521D\u671F\u5316
 BusinessTooltipFigure.assignedMeta=\u5272\u308A\u5F53\u3066\u3089\u308C\u305F\u30E1\u30BF\u30C7\u30FC\u30BF {0}
 DeleteAssignmentAction.DeleteAssignment=\u5272\u308A\u5F53\u3066\u306E\u524A\u9664

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_kr.properties

@@ -0,0 +1,6 @@
+AssignmentPropertySection.Name=\uC774\uB984
+AssignmentPropertySection.Comment=1rdrhdh
+BusinessPaletteFactory.Data=\uC790\uB8CC
+BusinessPaletteFactory.Input=\uC785\uB825
+BusinessModelingAssistantProvider.SelectDomainModelElement={0}\uBAA8\uB378 \uB0B4\uC6A9\uC5D0 \uAE30\uCD08\uD558\uC5EC \uC0C8\uB85C\uC6B4 \uB2E4\uC774\uC5B4\uADF8\uB7A8 \uC0DD\uC131
+BusinessNewDiagramFileWizard.DiagramFile=\uB2E4\uC774\uC5B4\uADF8\uB7A8 \uD30C\uC77C

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_nl.properties

@@ -0,0 +1,9 @@
+AssignmentPropertySection.Name=Naam
+BusinessPaletteFactory.ActionComment=Nieuwe Aktie
+BusinessInitDiagramFileAction.Error=Fout
+AssignmentPropertySection.Comment=Opmerking
+BusinessPaletteFactory.Data=Data
+BusinessPaletteFactory.Ellipse=Elips
+BusinessPaletteFactory.Document=Document
+BusinessPaletteFactory.Action=Aktie
+BusinessPaletteFactory.DocuemntComment=Nieuw Document

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_pl.properties

@@ -0,0 +1,60 @@
+BusinessInitDiagramFileAction.DiagramFile=plik diagramu
+BusinessAbstractParser.ValueOfLongIsExpected=Spodziewany typ Long
+BusinessAbstractParser.ValueOfFloatIsExpected=Spodziewany typ Float
+BusinessPaletteFactory.DataComment=Utwórz nowe dane
+CreateDiagramAction.CreateBusinessModel=Utwórz model biznesowy
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Utwórz nowy diagram biznesowy
+BusinessAbstractParser.StringIntegerConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Integer
+BusinessNewDiagramFileWizard.CreateNewDiagram=Stwórz nowy diagram na podst. {0} zawarto\u015Bci modelu
+BusinessAbstractParser.UnknownLiteral=Nieznany litera\u0142:
+BusinessAbstractParser.StringLongConverError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Long
+AssignmentPropertySection.DeleteAssignment=Skasuj przypisanie
+AssignmentPropertySection.Type=Typ
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Dost\u0119pne elementy modelu domeny:
+AssignmentPropertySection.Name=Nazwa
+CreateAssignmentCommand.CannotAssign=Nie mo\u017Cna przypisa\u0107
+BusinessNewDiagramFileWizard.DiagramRootElement=Element root diagramu
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Spodziewany typ Byte
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Spodziewany typ znakowy
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Spodziewany typ ci\u0105gu znakowego
+BusinessInitDiagramFileAction.Error=B\u0142\u0105d
+BusinessPaletteFactory.TerminalComment=Utwórz nowy terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Spodziewany typ Short
+BusinessPaletteFactory.DatabaseComment=Utwórz now\u0105 baz\u0119 danych
+AssignmentPropertySection.Comment=Komentarz
+BusinessInitDiagramFileAction.IntialNew=Inicjalizuj nowy
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Niepoprawne wej\u015Bcie w
+BusinessPaletteFactory.Gear=Tryb
+BusinessPaletteFactory.InputComment=Utwórz nowe wej\u015Bcie
+BusinessPaletteFactory.Data=Dane
+BusinessPaletteFactory.Ellipse=Elipsa
+BusinessPaletteFactory.Input=Wej\u015Bcie
+BusinessPaletteFactory.Relationshop=Relacja
+BusinessAbstractParser.ValueOfBooleanIsExpected=Spodziewana warto\u015B\u0107 typu logicznego
+BusinessPaletteFactory.decision=Decyzja
+BusinessPaletteFactory.Document=Dokument
+BusinessModelingAssistantProvider.SelectDomainModelElement=Wybierz element modelu domeny
+BusinessPaletteFactory.CreateActor=Utwórz aktora
+BusinessAbstractParser.StringDoubleConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Double
+EditAction.Edit=Edycja
+BusinessCreationWizardPage.CreateBusinessDiagram=Utwórz diagram biznesowy
+BusinessPaletteFactory.Database=\u0179ród\u0142o danych
+BusinessPaletteFactory.ListComment=Utwórz now\u0105 list\u0119
+BusinessPaletteFactory.DirectionalRelationShip=Relacja jednokierunkowa
+BusinessPaletteFactory.Action=Akcja
+BusinessPaletteFactory.RelationshopComment=Ustwórz now\u0105 relacj\u0119
+BusinessInitDiagramFileAction.LoadFaild=Nie uda\u0142o si\u0119 za\u0142adowa\u0107 pliku modelu
+BusinessPaletteFactory.DecisionComment=Utwórz now\u0105 decyzj\u0119
+BusinessAbstractParser.ValueOfDoubleIsExpected=Spodziewana warto\u015B\u0107 typu Double
+BusinessInitDiagramFileAction.UnableToLoadResource=Nie uda\u0142o si\u0119 za\u0142adowa\u0107 zasobu:
+BusinessPaletteFactory.CreateEllipse=Utwórz now\u0105 elips\u0119
+BusinessNewDiagramFileWizard.DiagramFile=Plik diagramu
+BusinessAbstractParser.StringShortConverError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Short
+BusinessPaletteFactory.DocuemntComment=Utwórz nowy Dokument
+BusinessAbstractParser.ValueOfIntegerIsExpected=Spodziewany typ Integer
+BusinessAbstractParser.StringFloatConvertError=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Float
+BusinessAbstractParser.StringValueDoesNotConvertToByteValue=Warto\u015B\u0107 typu znakowego nie mo\u017Ce by\u0107 skonwertowana na warto\u015B\u0107 typu Byte
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Inicjalizuj nowy plik diagramu Ecore
+DeleteAssignmentAction.DeleteAssignment=Skasuj przypisanie
+BusinessDiagramEditor.canNotSaveTitle=Ostrze\u017Cenie

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_pt_BR.properties

@@ -0,0 +1,67 @@
+BusinessInitDiagramFileAction.DiagramFile=Arquivo de Diagrama
+BusinessAbstractParser.ValueOfLongIsExpected=Valor de tipo Long esperado
+BusinessAbstractParser.ValueOfFloatIsExpected=Valor de tipo Float esperado
+BusinessPaletteFactory.DataComment=Criar novo Dado
+CreateDiagramAction.CreateBusinessModel=Criar modelo de negócio
+BusinessCreationWizardPage.CreatenewBusinessDiagram=Criar um novo diagrama de negócio
+BusinessPaletteFactory.CreateGear=Criar nova Engrenagem
+BusinessNewDiagramFileWizard.CreateNewDiagram=Criar novo diagrama baseado no conteúdo do modelo {0}
+BusinessAbstractParser.UnknownLiteral=Literal desconhecido:
+AssignmentPropertySection.DeleteAssignment=Apagar Cessão
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=Elementos do modelo de domínio disponíveis
+BusinessPaletteFactory.BidirectionalRelationShip=Relacionamento Bidirecional
+BusinessPaletteFactory.CreateDirectionalRelationShip=Criar novo relacionamento direcional
+BusinessPaletteFactory.CreateBidirectionalRelationShip=Criar novo Relacionamento Bidirecional
+AssignmentPropertySection.Name=Nome
+CreateAssignmentCommand.CannotAssign=Não é possível atribuir.
+BusinessNewDiagramFileWizard.DiagramRootElement=Elemento Raiz do Diagrama
+BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=Não ha um Elemento Raiz de Diagrama selecionado
+BusinessVisualIDRegistry.ParseError=Impossível fazer o parse do 'view type' como um número visualID:
+BusinessAbstractParser.ValueOfTypeByteIsExpected=Valor do tipo Byte esperado
+BusinessAbstractParser.ValueOfTypeCharacterIsExpected=Valor do tipo Character esperado
+BusinessPaletteFactory.ActionComment=Criar nova ação
+BusinessAbstractParser.ValueOfTypeStringIsExpected=Valor do tipo String esperado
+BusinessInitDiagramFileAction.Error=Erro
+BusinessNewDiagramFileWizard.SelectRootElement=Selecione elemento raiz do diagrama
+RepositoryFactoryProxyLabelProvider.Deleted=(Apagado)
+BusinessPaletteFactory.TerminalComment=Criar novo Terminal
+BusinessAbstractParser.ValueOfShortIsExpected=Valor de tipo Short esperado
+BusinessPaletteFactory.DatabaseComment=Criar um novo Banco
+AssignmentPropertySection.Comment=Comentário
+BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=Elemento Raiz inválido do Diagrama foi selecionado
+BusinessInitDiagramFileAction.IntialNew=Iniciar Novo
+RepositoryFactoryProxyLabelProvider.NotFound=(Não encontrado)
+BusinessPaletteFactory.Terminal=Terminal
+BusinessAbstractParser.InvalidInputAt=Entrada inválida em
+BusinessPaletteFactory.Gear=Engrenagem
+BusinessPaletteFactory.InputComment=Criar nova Entrada
+BusinessPaletteFactory.Data=Dado
+BusinessPaletteFactory.Ellipse=Elipse
+BusinessPaletteFactory.Input=Entrada
+BusinessPaletteFactory.Relationshop=Relacionamento
+BusinessAbstractParser.ValueOfBooleanIsExpected=Valor de tipo Boolean esperado
+BusinessPaletteFactory.decision=Decisão
+BusinessPaletteFactory.Document=Documento
+BusinessModelingAssistantProvider.SelectDomainModelElement=Selecione o elemento de modelo de domínio
+BusinessPaletteFactory.CreateActor=Criar novo Ator
+BusinessPaletteFactory.Actor=Ator
+EditAction.Edit=Editar
+BusinessPaletteFactory.Database=Fonte de dados
+BusinessPaletteFactory.ListComment=Criar nova Lista
+BusinessPaletteFactory.DirectionalRelationShip=Relacionamento Direcional
+BusinessPaletteFactory.Action=Ação
+BusinessPaletteFactory.RelationshopComment=Criar novo Relacionamento
+BusinessInitDiagramFileAction.LoadFaild=Falha na carga do arquivo de modelo
+BusinessPaletteFactory.DecisionComment=Criar nova Decisão
+BusinessAbstractParser.ValueOfDoubleIsExpected=Valor de tipo Double esperado
+BusinessInitDiagramFileAction.UnableToLoadResource=Impossível carregar recursos:
+BusinessPaletteFactory.CreateEllipse=Criar nova Elipse
+BusinessNewDiagramFileWizard.DiagramFile=Arquivo de Diagrama
+BusinessPaletteFactory.DocuemntComment=Criar novo Documento
+BusinessAbstractParser.ValueOfIntegerIsExpected=Valor de tipo Inteiro esperado
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=Selecione um Elemento Raiz do Diagrama:
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=Selecione o elemento de modelo de semântica a ser analisado no diagrama
+BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=Iniciar novo arquivo de Diagrama Ecore
+BusinessTooltipFigure.assignedMeta=Metadados atribuidos à {0}
+DeleteAssignmentAction.DeleteAssignment=Apagar Cessão
+BusinessDiagramEditor.canNotSaveTitle=Advertência

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_ro.properties

@@ -0,0 +1,3 @@
+AssignmentPropertySection.Type=Tip
+AssignmentPropertySection.Name=Nume
+AssignmentPropertySection.Comment=Comentarii

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_sk.properties

@@ -1,14 +0,0 @@
-AssignmentPropertySection.Type=Typ
-AssignmentPropertySection.Name=Meno
-BusinessInitDiagramFileAction.Error=CHYBA
-AssignmentPropertySection.Comment=Koment\u00E1r
-BusinessPaletteFactory.Data=D\u00E1ta
-BusinessPaletteFactory.Input=VSTUP
-BusinessPaletteFactory.Relationshop=Vz\u0165ah
-BusinessPaletteFactory.decision=Rozhodnutie
-BusinessPaletteFactory.Document=Dokument
-BusinessPaletteFactory.Database=D\u00E1tov\u00FD zdroj
-BusinessPaletteFactory.Action=Akcia
-BusinessDiagramEditor.canNotSaveTitle=Varovanie
-BusinessRulersAndGridComposite.Measurement_Group_Label_Text=Meranie
-BusinessRulersAndGridComposite.Line_Style_Label_Text=\u0160t\u00FDl

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_sr.properties

@@ -0,0 +1,2 @@
+BusinessInitDiagramFileAction.Error=Gre\u0161ka
+BusinessInitDiagramFileAction.LoadFaild=_

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_tr.properties

@@ -0,0 +1,12 @@
+AssignmentPropertySection.Type=Tip
+AssignmentPropertySection.Name=Ad\u0131
+BusinessInitDiagramFileAction.Error=Hata
+BusinessPaletteFactory.InputComment=Yeni giri\u015F olu\u015Ftur
+BusinessPaletteFactory.Input=Giri\u015F
+BusinessPaletteFactory.decision=Karar
+BusinessPaletteFactory.Document=Döküman
+BusinessPaletteFactory.CreateActor=Yeni Aktör olu\u015Ftur
+BusinessPaletteFactory.Actor=Aktör
+BusinessPaletteFactory.Database=Verikayna\u011F\u0131
+BusinessPaletteFactory.ListComment=Yeni liste olu\u015Ftur
+BusinessPaletteFactory.DocuemntComment=Yeni döküman olu\u015Ftur

i18n/plugins/org.talend.designer.business.diagram.nl/src/messages_zh_CN.properties

@@ -7,12 +7,12 @@ BusinessCreationWizardPage.CreatenewBusinessDiagram=\u521B\u5EFA\u65B0\u7684\u90
 BusinessAbstractParser.StringIntegerConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AInteger\u7C7B\u578B
 BusinessPaletteFactory.CreateGear=\u521B\u5EFA\u9F7F\u8F6E
 SimpleBusinessCreationWizardPage.Title=\u65B0\u7684\u4E1A\u52A1\u6A21\u578B
-BusinessNewDiagramFileWizard.CreateNewDiagram=\u57FA\u4E8E {0} \u6A21\u578B\u5185\u5BB9\u521B\u5EFA\u65B0\u56FE
+BusinessNewDiagramFileWizard.CreateNewDiagram=\u521B\u5EFA\u65B0\u7684\u56FE\u8868
 BusinessAbstractParser.UnknownLiteral=\u65E0\u6548\u7684\u6587\u5B57
 BusinessAbstractParser.StringLongConverError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3ALong\u7C7B\u578B
-AssignmentPropertySection.DeleteAssignment=\u5220\u9664\u5206\u914D
+AssignmentPropertySection.DeleteAssignment=\u5220\u9664\u8D4B\u503C
 AssignmentPropertySection.Type=\u7C7B\u578B
-BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u53EF\u7528\u7684\u57DF\u6A21\u578B\u5143\u7D20:
+BusinessModelingAssistantProvider.AvaiableDomainModelElements=\u65E0\u6548\u7684\u57DF\u6A21\u578B\u5143\u7D20
 BusinessPaletteFactory.BidirectionalRelationShip=\u53CC\u5411\u5173\u8054
 BusinessPaletteFactory.CreateDirectionalRelationShip=\u521B\u5EFA\u65B9\u5411\u5173\u8054
 BusinessPaletteFactory.CreateBidirectionalRelationShip=\u521B\u5EFA\u53CC\u5411\u5173\u8054
@@ -20,20 +20,20 @@ AssignmentPropertySection.Name=\u540D\u79F0
 CreateAssignmentCommand.CannotAssign=\u4E0D\u80FD\u5206\u914D\u3002
 BusinessNewDiagramFileWizard.DiagramRootElement=\u56FE\u8868\u6839\u5143\u7D20
 BusinessNewDiagramFileWizard.NoDiagramRootElementSelectedError=\u6CA1\u6709\u56FE\u8868\u6839\u5143\u7D20\u88AB\u9009\u4E2D
-BusinessVisualIDRegistry.ParseError=\u4E0D\u80FD\u628A\u89C6\u56FE\u7C7B\u578B\u5F53\u4F5C visualID \u6570\u5B57\u6765\u8F6C\u6362
+BusinessVisualIDRegistry.ParseError=\u4E0D\u80FD\u628A\u89C6\u56FE\u7C7B\u578B\u5F53\u4F5CvisialID\u6570\u5B57\u6765\u8F6C\u6362
 OpenDiagramAction.EditBusinessModel=\u7F16\u8F91\u4E1A\u52A1\u6A21\u578B
 BusinessAbstractParser.ValueOfTypeByteIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AByte
 BusinessAbstractParser.ValueOfTypeCharacterIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ACharacter
 BusinessPaletteFactory.ActionComment=\u521B\u5EFA\u65B0\u7684\u52A8\u4F5C
 BusinessAbstractParser.ValueOfTypeStringIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AString
 BusinessInitDiagramFileAction.Error=\u9519\u8BEF
-BusinessNewDiagramFileWizard.SelectRootElement=\u9009\u62E9\u56FE\u6839\u5143\u7D20
+BusinessNewDiagramFileWizard.SelectRootElement=\u9009\u62E9\u56FE\u8868\u6839\u5143\u7D20
 RepositoryFactoryProxyLabelProvider.Deleted=\uFF08\u5220\u9664\uFF09
 BusinessPaletteFactory.TerminalComment=\u521B\u5EFA\u65B0\u7684\u4E2D\u65AD\u70B9
 BusinessAbstractParser.ValueOfShortIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AShort
 BusinessPaletteFactory.DatabaseComment=\u521B\u5EFA\u65B0\u7684\u6570\u636E\u5E93
 AssignmentPropertySection.Comment=\u6CE8\u91CA
-SimpleBusinessCreationWizard.NewBusinessModel=\u65B0\u7684\u4E1A\u52A1\u6A21\u578B
+SimpleBusinessCreationWizard.NewBusinessModel=\u65B0\u7684\u4E1A\u52A1\u578B
 BusinessNewDiagramFileWizard.InvalidDiagramRootElementSelected=\u9009\u4E2D\u4E86\u65E0\u6548\u7684\u56FE\u8868\u6839\u5143\u7D20
 BusinessInitDiagramFileAction.IntialNew=\u521D\u59CB\u5316\u65B0\u7684
 FindAssignmentAction.FindAssignments=\u67E5\u627E\u5206\u914D\u4EFB\u52A1
@@ -47,22 +47,21 @@ BusinessPaletteFactory.Ellipse=\u692D\u5706
 BusinessPaletteFactory.Input=\u8F93\u5165
 BusinessPaletteFactory.List=\u5217\u8868
 BusinessPaletteFactory.Relationshop=\u5173\u7CFB
-BusinessAbstractParser.ValueOfBooleanIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u4E3A Boolean
+BusinessAbstractParser.ValueOfBooleanIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ABoolean
 BusinessPaletteFactory.decision=\u51B3\u7B56
 BusinessPaletteFactory.Document=\u6587\u6863
 BusinessModelingAssistantProvider.SelectDomainModelElement=\u9009\u62E9\u57DF\u6A21\u578B\u5143\u7D20
 BusinessPaletteFactory.CreateActor=\u521B\u5EFA\u89D2\u8272
 BusinessAbstractParser.StringDoubleConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3ADoule\u7C7B\u578B
 BusinessPaletteFactory.Actor=\u89D2\u8272
-EditAction.Edit=\u7F16\u8F91
+EditAction.Edit=\u7F16\u8F91\u5206\u914D\u4EFB\u52A1
 BusinessCreationWizardPage.CreateBusinessDiagram=\u521B\u5EFA\u903B\u8F91\u56FE
 BusinessPaletteFactory.Database=\u6570\u636E\u6E90
 BusinessPaletteFactory.ListComment=\u521B\u5EFA\u65B0\u7684\u5217\u8868
 BusinessPaletteFactory.DirectionalRelationShip=\u65B9\u5411\u5173\u8054
-BusinessPaletteFactory.Action=\u64CD\u4F5C
+BusinessPaletteFactory.Action=\u52A8\u4F5C
 BusinessPaletteFactory.RelationshopComment=\u521B\u5EFA\u65B0\u7684\u5173\u7CFB
-SimpleBusinessCreationWizardPage.Super=BusinessProcessCreatePage
-BusinessInitDiagramFileAction.LoadFaild=\u6A21\u578B\u6587\u4EF6\u52A0\u8F7D\u5931\u8D25
+BusinessInitDiagramFileAction.LoadFaild=\u6A21\u578B\u6587\u4EF6\u88C5\u8F7D\u5931\u8D25
 BusinessPaletteFactory.DecisionComment=\u521B\u5EFA\u65B0\u7684\u51B3\u7B56
 BusinessAbstractParser.ValueOfDoubleIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3ADouble
 OpenDiagramAction.ReadBusinessModel=\u8BFB\u53D6\u4E1A\u52A1\u6A21\u578B
@@ -72,19 +71,19 @@ BusinessNewDiagramFileWizard.DiagramFile=\u56FE\u8868\u6587\u4EF6
 BusinessAbstractParser.StringShortConverError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AShort\u7C7B\u578B
 BusinessPaletteFactory.DocuemntComment=\u521B\u5EFA\u65B0\u7684\u6587\u6863
 BusinessAbstractParser.ValueOfIntegerIsExpected=\u503C\u7684\u7C7B\u578B\u5E94\u8BE5\u4E3AInteger
-BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u9009\u62E9\u56FE\u6839\u5143\u7D20:
-BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u9009\u62E9\u8981\u5728\u56FE\u4E0A\u63CF\u8FF0\u7684\u8BED\u4E49\u6A21\u578B\u5143\u7D20
+BusinessNewDiagramFileWizard.SelectDiagramRootElement=\u9009\u62E9\u56FE\u8868\u6839\u5143\u7D20\uFF1A
+BusinessNewDiagramFileWizard.SelectSemanticModelElement=\u9009\u62E9\u8981\u5728\u56FE\u8868\u4E0A\u63CF\u8FF0\u7684\u8BED\u4E49\u6A21\u578B\u5143\u7D20
 BusinessAbstractParser.StringFloatConvertError=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AFloat\u7C7B\u578B
 BusinessAbstractParser.StringValueDoesNotConvertToByteValue=String\u7C7B\u578B\u7684\u503C\u4E0D\u80FD\u8F6C\u6362\u4E3AByte\u7C7B\u578B
 BusinessNewDiagramFileWizard.IntialNewEcoreDiagramFile=\u521D\u59CB\u5316\u65B0\u7684Ecore\u56FE\u8868\u6587\u4EF6
 BusinessTooltipFigure.assignedMeta={0}\u5206\u914D\u5143\u6570\u636E
-DeleteAssignmentAction.DeleteAssignment=\u5220\u9664\u5206\u914D
+DeleteAssignmentAction.DeleteAssignment=\u5220\u9664\u8D4B\u503C
 BusinessDiagramEditor.canNotSaveTitle=\u8B66\u544A
 BusinessDiagramEditor.canNotSaveMessage=\u4E1A\u52A1\u6A21\u578B\u672A\u88AB\u7528\u6237\u9501\u5B9A\uFF0C\u65E0\u6CD5\u4FDD\u5B58\u3002
 BusinessRulersAndGridComposite.Grid_On_Label_Text=\u663E\u793A\u7F51\u683C
 BusinessRulersAndGridComposite.Grid_Level_Label_Text=\u7F51\u683C\u5728\u524D\u9762
-BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=\u4E0E\u7F51\u683C\u5BF9\u9F50
-BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=\u4E0E\u56FE\u5F62\u5BF9\u9F50
+BusinessRulersAndGridComposite.Snap_To_Grid_Label_Text=\u5BF9\u9F50\u7F51\u683C
+BusinessRulersAndGridComposite.Snap_To_Geometry_Label_Text=\u6309\u7167\u5F62\u72B6\u5BF9\u9F50
 BusinessRulersAndGridComposite.Ruler_On_Label_Text=\u663E\u793A\u6807\u5C3A
 BusinessRulersAndGridComposite.Ruler_Units_Label_Text=\u6807\u5C3A\u5355\u4F4D
 BusinessRulersAndGridComposite.Grid_Spacing_Label_Text=\u7F51\u683C\u95F4\u8DDD
@@ -97,7 +96,7 @@ BusinessRulersAndGridComposite.Restore_Defaults_Label_Text=\u6062\u590D\u9ED8\u8
 BusinessRulersAndGridComposite.Inches_Label_Text=\u82F1\u5BF8
 BusinessRulersAndGridComposite.Centimeters_Label_Text=\u5398\u7C73
 BusinessRulersAndGridComposite.Pixel_Label_Text=\u50CF\u7D20
-BusinessRulersAndGridComposite.Solid_Label_Text=\u5B9E\u7EBF
+BusinessRulersAndGridComposite.Solid_Label_Text=\u56FA\u4F53
 BusinessRulersAndGridComposite.Dash_Label_Text=\u7834\u6298\u53F7
 BusinessRulersAndGridComposite.Dot_Label_Text=\u70B9
 BusinessRulersAndGridComposite.Dash_Dot_Label_Text=\u70B9\u5212\u7EBF

i18n/plugins/org.talend.designer.codegen.nl/META-INF/MANIFEST.MF

@@ -2,7 +2,7 @@ Manifest-Version: 1.0
 Bundle-ManifestVersion: 2
 Bundle-Name: org.talend.designer.codegen Nl Fragment
 Bundle-SymbolicName: org.talend.designer.codegen.nl
-Bundle-Version: 7.4.1.qualifier
+Bundle-Version: 7.0.2.qualifier
 Fragment-Host: org.talend.designer.codegen
 Bundle-Localization: plugin
 Bundle-Vendor: .Talend SA.

i18n/plugins/org.talend.designer.codegen.nl/plugin_el.properties

@@ -0,0 +1,5 @@
+providerName=www.example.org
+pluginName=\u039C\u03BF\u03BD\u03C4\u03AD\u03BB\u03BF EmittersPool
+components=\u03A3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03AC \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03B1
+trunjob=tRunJob
+format=\u039C\u03BF\u03C1\u03C6\u03AE

i18n/plugins/org.talend.designer.codegen.nl/plugin_fr.properties

@@ -1,5 +1,5 @@
 providerName=www.example.org
-pluginName=Mod\u00E8le EmittersPool
+pluginName=Modèle EmittersPool
 components=Composants
 trunjob=tRunJob
 format=Format

i18n/plugins/org.talend.designer.codegen.nl/plugin_hr.properties

@@ -0,0 +1 @@
+providerName=www.primjer.com

i18n/plugins/org.talend.designer.codegen.nl/plugin_pl.properties

@@ -0,0 +1 @@
+components=Komponenty

i18n/plugins/org.talend.designer.codegen.nl/plugin_sk.properties

@@ -1 +0,0 @@
-format=Form\u00E1t

i18n/plugins/org.talend.designer.codegen.nl/plugin_zh_CN.properties

@@ -1,5 +1,3 @@
 providerName=www.example.org
 pluginName=\u7EC4\u4EF6\u6A21\u5757
-components=\u7EC4\u4EF6
-trunjob=tRunJob
 format=\u683C\u5F0F

i18n/plugins/org.talend.designer.codegen.nl/pom.xml

@@ -4,7 +4,7 @@
   <parent>
     <groupId>org.talend.studio</groupId>
     <artifactId>tdi-studio-se</artifactId>
-    <version>7.4.1-SNAPSHOT</version>
+    <version>7.0.2-SNAPSHOT</version>
     <relativePath>../../../</relativePath>
   </parent>
   <artifactId>org.talend.designer.codegen.nl</artifactId>

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_ar.properties

@@ -0,0 +1,35 @@
+CodeGenerator.getGraphicalNode1=------process.getGraphicalNodes()------
+CodeGenerator.getGraphicalNode2=------process.getGeneratingNodes()------
+CodeGeneratorEmittersPoolFactory.initialException=\u062E\u0637\u0623 \u062E\u0644\u0627\u0644 \u0627\u0644\u062A\u0647\u064A\u0626\u0629
+CodeGeneratorService.invalidLanguage1=\u0646\u0648\u0639 \u0627\u0644\u0644\u063A\u0629 \u063A\u064A\u0631 \u0635\u0627\u0644\u062D.
+CodeGeneratorService.invalidLanguage2=\u0646\u0648\u0639 \u0627\u0644\u0644\u063A\u0629 \u063A\u064A\u0631 \u0635\u0627\u0644\u062D.
+CodeGenInit.createProject=\u0625\u0646\u0634\u0627\u0621 \u0645\u0634\u0631\u0648\u0639 {0}
+CodeGenInit.deleteProject=\u062D\u0630\u0641 \u0645\u0634\u0631\u0648\u0639 {0}
+CodeGenInit.removeLink=\u0625\u0632\u0627\u0644\u0629 \u0645\u0648\u0631\u062F \u0645\u0631\u062A\u0628\u0637
+CodeGenInit.saveWorkspace=\u062D\u0641\u0638 \u0645\u0633\u0627\u062D\u0629 \u0627\u0644\u0639\u0645\u0644
+ComponentsLocalProviderService.componentLoadError=\u062E\u0637\u0627 \u0641\u064A \u062A\u062D\u0645\u064A\u0644 \u0627\u0644\u0645\u0643\u0648\u0646
+ComponentsLocalProviderService.talendExchangeError=\u062E\u0637\u0623 \u062A\u0627\u0644\u0646\u062F \u0625\u0643\u0633\u062A\u0634\u064A\u0646\u062C
+ComponentsPreferencePage.WarningTitle=\u062A\u062D\u0630\u064A\u0631
+FAMILY.Business=\u0639\u0645\u0644
+FAMILY.eXist=\u0645\u0648\u062C\u0648\u062F
+FAMILY.Hive=Hive
+FAMILY.Informix=Informix
+FAMILY.Ingres=Ingres
+FAMILY.Input=\u0645\u062F\u062E\u0644
+FAMILY.JDBC=JDBC
+FAMILY.LDAP=LDAP
+FAMILY.MS_SQL_Server=\u0646\u0638\u0627\u0645 MS SQL
+FAMILY.MSSql=MSSql
+FAMILY.MySQL=MySQL
+FAMILY.Netezza=Netezza
+FAMILY.Oracle=\u0623\u0648\u0631\u0627\u0643\u0644
+FAMILY.Output=\u0645\u062E\u0631\u062C
+FAMILY.PostgreSQL=PostgreSQL
+FAMILY.SAP=SAP
+FAMILY.Sas=SAS
+FAMILY.SCD=SCD
+FAMILY.SCP=SCP
+FAMILY.SPSS=SPSS
+FAMILY.Salesforce=Salesforce
+FAMILY.System=\u0646\u0638\u0627\u0645
+FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_de.properties

@@ -1,16 +1,16 @@
 JavaRoutineSynchronizer.UnsupportedOperation.Exception1=Methode nicht implementiert: org.talend.designer.codegen.JavaRoutineSynchronizer Zeile:49
-CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=JETEmitters Projekt nicht vorhanden, vollst\u00E4ndige Neuinitialisierung notwendig
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=JETEmitters Projekt nicht vorhanden, vollständige Neuinitialisierung notwendig
 generatedcode.footerprocess.nbcharsgenerated={0} Zeichen erstellt von {1}
 CodeGeneratorEmittersPoolFactory.Class.NotFound=Vorlage noch vorhanden, aber Klasse {0} ist nicht mehr im Arbeitsbereich. Diese Einheit muss neu kompiliert werden.
-CodeGeneratorEmittersPoolFactory.PersitentData.Error=Persistente Daten k\u00F6nnen nicht gespeichert werden : 
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=Persistente Daten können nicht gespeichert werden : 
 generatedcode.copyright.title=Copyright (c) 2005-2009, Talend Inc.
-CodeGeneratorEmittersPoolFactory.initMessage=Initialisierung der Generator-Engine wird durchgef\u00FChrt...
+CodeGeneratorEmittersPoolFactory.initMessage=Initialisierung der Generator-Engine wird durchgeführt...
 generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html).
-EmfEmittersPersistence.CodeGen.DataMissing=Daten zur Codegenerierung fehlen. Starte vollst\u00E4ndige Codegenerierung.
-CodeGenerator.JET.TimeOut=Zeit\u00FCberschreitung bei der JET-Initialisierung
+EmfEmittersPersistence.CodeGen.DataMissing=Daten zur Codegenerierung fehlen. Starte vollständige Codegenerierung.
+CodeGenerator.JET.TimeOut=Zeitüberschreitung bei der JET-Initialisierung
 CodeGenerator.Node.NotFound=Knoten im aktuellen Prozess nicht gefunden
 generatedcode.copyright.body3=Mehr Informationen zu den Talend Produkten unter www.talend.com
-EmittersPoolFactoryImpl.Class.IllegalArg=Die Klasse ' {0}' ist kein g\u00FCltiger Klassenbezeichner
+EmittersPoolFactoryImpl.Class.IllegalArg=Die Klasse ' {0}' ist kein gültiger Klassenbezeichner
 generatedcode.copyright.body2=/ JobDesigner (CodeGenerator version {0}).
 JavaRoutineSynchronizer.UnsupportedOperation.Exception2=Methode nicht implementiert: org.talend.designer.codegen.JavaRoutineSynchronizer Zeile:58
 CodeGenerator.getGraphicalNode1=------process.getGraphicalNodes()------
@@ -21,23 +21,23 @@ CodeGeneratorEmittersPoolFactory.componentCompiled=Komponenten kompiliert in {0}
 CodeGeneratorEmittersPoolFactory.failCompail=Kompilierung der Komponenten fehlgeschlafen : \r\n
 CodeGeneratorEmittersPoolFactory.initialException=Ausnahme bei der Initialisierung
 CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=Fehler bei der JetEmitter Initialisierung
-CodeGeneratorService.invalidLanguage1=Ung\u00FCltiger Sprachtyp
-CodeGeneratorService.invalidLanguage2=Ung\u00FCltiger Sprachtyp
+CodeGeneratorService.invalidLanguage1=Ungültiger Sprachtyp
+CodeGeneratorService.invalidLanguage2=Ungültiger Sprachtyp
 CodeGenInit.createProject=Erstelle {0} Projekt
-CodeGenInit.deleteProject=L\u00F6sche {0} Projekt
+CodeGenInit.deleteProject=Lösche {0} Projekt
 CodeGenInit.initTemplate=Initialisiere Templates
 CodeGenInit.saveWorkspace=Speichere Workspace
 TalendJetEmitter.compileFail=Kompilierung fehlgeschlagen : {0} : {1}
 TalendJetEmitter.exception=Ausnahme bei
-CodeGeneratorEmittersPoolFactory.dialogContent=JetEmitter Generierung wurde abgebrochen, um Probleme zu verhindern, dr\u00FCcken Sie bitte Strg-Shift-F3 um neu zu generieren!
+CodeGeneratorEmittersPoolFactory.dialogContent=JetEmitter Generierung wurde abgebrochen, um Probleme zu verhindern, drücken Sie bitte Strg-Shift-F3 um neu zu generieren!
 ComponentsLocalProviderService.componentLoadError=Fehler beim Laden der Komponenten
 ComponentsLocalProviderService.talendExchangeError=Talend Exchange Fehler
-ComponentsPreferencePage.ButtonLabel0=\u00DCbernehmen
+ComponentsPreferencePage.ButtonLabel0=Übernehmen
 ComponentsPreferencePage.configuration.LINK_STYLE=Standard Mapping-Verbindungen anzeigen als:
 ComponentsPreferencePage.rowLimit=Zeilen-Limit
 ComponentsPreferencePage.WarningTitle=Warnung
 ComponentsProviderManager.unableLoad=Component Provider konnte nicht geladen werden
-ComponenttRunJobPreferencePage.label=Beim Doppelklick auf eine tRunJob-Komponente, den entsprechenden Job nicht \u00F6ffnen.
+ComponenttRunJobPreferencePage.label=Beim Doppelklick auf eine tRunJob-Komponente, den entsprechenden Job nicht öffnen.
 ComponenttRunJobPreferencePage.showCorrespondingJob=Zeige entsprechenden Job nach einen Doppelklick auf die tRunJob Komponente.
 XsdValidationCacheManager.unableLoadxsd=xsd Validierungs Cache Datei konnte nicht geladen werden
 XsdValidationCacheManager.unableSavexsd=xsd Validierungs Cache Datei konnte nicht gespeichert werden
@@ -57,7 +57,7 @@ FAMILY.DB2=DB2
 FAMILY.DB_Generic=DB Generic
 FAMILY.DB_JDBC=DB JDBC
 FAMILY.DB_SCD=DB SCD
-FAMILY.Data_Quality=Datenqualit\u00E4t
+FAMILY.Data_Quality=Datenqualität
 FAMILY.Databases=Datenbanken
 FAMILY.ELT=ELT
 FAMILY.ESB=ESB
@@ -88,7 +88,7 @@ FAMILY.Microsoft_CRM=Microsoft CRM
 FAMILY.Misc=Verschiedenes
 FAMILY.MySQL=MySQL
 FAMILY.Netezza=Netezza
-FAMILY.OLAP_Cube=OLAP W\u00FCrfel
+FAMILY.OLAP_Cube=OLAP Würfel
 FAMILY.Oracle=Oracle
 FAMILY.Orchestration=Instrumentation
 FAMILY.Output= Ausgabe

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_el.properties

@@ -0,0 +1,108 @@
+JavaRoutineSynchronizer.UnsupportedOperation.Exception1=\u03BC\u03AD\u03B8\u03BF\u03B4\u03BF\u03C2 \u03BC\u03B7 \u03C5\u03BB\u03BF\u03C0\u03BF\u03B9\u03AE\u03C3\u03B9\u03BC\u03B7: org.talend.designer.codegen.JavaRoutineSynchronizer line:49
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=\u03A4\u03BF \u0388\u03C1\u03B3\u03BF JETEmitters \u03B4\u03B5\u03BD \u03B5\u03AF\u03BD\u03B1\u03B9 \u03C0\u03B1\u03C1\u03CC\u03BD, \u03C7\u03C1\u03B5\u03B9\u03AC\u03B6\u03B5\u03C4\u03B1\u03B9 \u03C0\u03BB\u03AE\u03C1\u03B7\u03C2 \u03B5\u03C0\u03B1\u03BD\u03B5\u03BA\u03BA\u03AF\u03BD\u03B7\u03C3\u03B7
+generatedcode.footerprocess.nbcharsgenerated={0} \u03C7\u03B1\u03C1\u03B1\u03BA\u03C4\u03AE\u03C1\u03B5\u03C2 \u03C0\u03B1\u03C1\u03AC\u03C7\u03B8\u03B7\u03BA\u03B1\u03BD \u03B1\u03C0\u03CC \u03C4\u03BF {1}
+CodeGeneratorEmittersPoolFactory.Class.NotFound=\u03A4\u03BF \u03C0\u03C1\u03CC\u03C4\u03C5\u03C0\u03BF \u03C5\u03C0\u03AC\u03C1\u03C7\u03B5\u03B9 \u03B1\u03BA\u03CC\u03BC\u03B1, \u03B1\u03BB\u03BB\u03AC \u03B7 \u03BA\u03BB\u03AC\u03C3\u03B7 {0} \u03B5\u03BE\u03B1\u03C6\u03B1\u03BD\u03AF\u03C3\u03C4\u03B7\u03BA\u03B5 \u03B1\u03C0\u03CC \u03C4\u03BF \u03C7\u03CE\u03C1\u03BF \u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1\u03C2. \u0391\u03C5\u03C4\u03AE \u03B7 \u03BC\u03BF\u03BD\u03AC\u03B4\u03B1 \u03C7\u03C1\u03B5\u03B9\u03AC\u03B6\u03B5\u03C4\u03B1\u03B9 \u03B5\u03C0\u03B1\u03BD\u03B1\u03C3\u03CD\u03BD\u03B8\u03B5\u03C3\u03B7.
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=\u0394\u03B9\u03B1\u03C4\u03B7\u03C1\u03AE\u03C3\u03B9\u03BC\u03B1 \u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1 \u03B4\u03B5 \u03BC\u03C0\u03BF\u03C1\u03BF\u03CD\u03BD \u03BD\u03B1 \u03B1\u03C0\u03BF\u03B8\u03B7\u03BA\u03B5\u03C5\u03C4\u03BF\u03CD\u03BD:
+generatedcode.copyright.title=Copyright (c) 2005-2009, Talend Inc.
+CodeGeneratorEmittersPoolFactory.initMessage=\u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u039C\u03B7\u03C7\u03B1\u03BD\u03AE\u03C2 \u03A0\u03B1\u03C1\u03B1\u03B3\u03C9\u03B3\u03AE\u03C2 \u03C3\u03B5 \u03B5\u03BE\u03AD\u03BB\u03B9\u03BE\u03B7...
+generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html).
+EmfEmittersPersistence.CodeGen.DataMissing=\u0391\u03C0\u03CC\u03BD\u03C4\u03B1 \u03B4\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03B1 \u03C0\u03B1\u03C1\u03B1\u03B3\u03C9\u03B3\u03AE\u03C2 \u03BA\u03CE\u03B4\u03B9\u03BA\u03B1. \u0395\u03BA\u03BA\u03AF\u03BD\u03B7\u03C3\u03B7 \u03C0\u03BB\u03AE\u03C1\u03BF\u03C5\u03C2 \u03C0\u03B1\u03C1\u03B1\u03B3\u03C9\u03B3\u03AE\u03C2 \u03BA\u03CE\u03B4\u03B9\u03BA\u03B1.
+CodeGenerator.JET.TimeOut=\u03A4\u03AD\u03BB\u03BF\u03C2 \u03A7\u03C1\u03CC\u03BD\u03BF\u03C5 \u03B1\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7\u03C2 JET
+generatedcode.copyright.body4=\u039C\u03C0\u03BF\u03C1\u03B5\u03AF\u03C4\u03B5 \u03BD\u03B1 \u03B4\u03B9\u03B1\u03BD\u03B5\u03AF\u03BC\u03B5\u03C4\u03B5 \u03B1\u03C5\u03C4\u03CC \u03C4\u03BF\u03BD \u03BA\u03CE\u03B4\u03B9\u03BA\u03B1 \u03C5\u03C0\u03CC \u03C4\u03BF\u03C5\u03C2 \u03CC\u03C1\u03BF\u03C5\u03C2 \u03C4\u03B7\u03C2 \u03AC\u03B4\u03B5\u03B9\u03B1\u03C2 GNU LGPL
+CodeGenerator.Node.NotFound=\u039F \u03BA\u03CC\u03BC\u03B2\u03BF\u03C2 \u03B4\u03B5 \u03B2\u03C1\u03AD\u03B8\u03B7\u03BA\u03B5 \u03C3\u03C4\u03B7\u03BD \u03C0\u03B1\u03C1\u03BF\u03CD\u03C3\u03B1 \u03B4\u03B9\u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1
+generatedcode.copyright.body3=\u039C\u03C0\u03BF\u03C1\u03B5\u03AF\u03C4\u03B5 \u03BD\u03B1 \u03B2\u03C1\u03B5\u03AF\u03C4\u03B5 \u03C0\u03B5\u03C1\u03B9\u03C3\u03C3\u03CC\u03C4\u03B5\u03C1\u03B5\u03C2 \u03C0\u03BB\u03B7\u03C1\u03BF\u03C6\u03BF\u03C1\u03AF\u03B5\u03C2 \u03B3\u03B9\u03B1 \u03C0\u03C1\u03BF\u03CA\u03CC\u03BD\u03C4\u03B1 Talend \u03C3\u03C4\u03BF www.talend.com.
+EmittersPoolFactoryImpl.Class.IllegalArg=\u0397 \u03BA\u03BB\u03AC\u03C3\u03B7 ' {0}' \u03B4\u03B5\u03BD \u03B5\u03AF\u03BD\u03B1\u03B9 \u03AD\u03BD\u03B1\u03C2 \u03AD\u03B3\u03BA\u03C5\u03C1\u03BF\u03C2 \u03C4\u03B1\u03BE\u03B9\u03BD\u03BF\u03BC\u03B7\u03C4\u03AE\u03C2.
+JavaRoutineSynchronizer.UnsupportedOperation.Exception2=\u03BC\u03B7 \u03C5\u03BB\u03BF\u03C0\u03BF\u03B9\u03B7\u03BC\u03AD\u03BD\u03B7 \u03BC\u03AD\u03B8\u03BF\u03B4\u03BF\u03C2: org.talend.designer.codegen.JavaRoutineSynchronizer line:58
+CodeGenerator.getGraphicalNode1=------process.getGraphicalNodes()------
+CodeGenerator.getGraphicalNode2=------process.getGeneratingNodes()------
+CodeGenerator.newLine=\n\n\n\n
+CodeGeneratorEmittersPoolFactory.codeThread=\u039D\u03AE\u03BC\u03B1 \u03C5\u03C0\u03BF\u03B2\u03AC\u03B8\u03C1\u03BF\u03C5 \u03C0\u03B1\u03C1\u03B1\u03B3\u03C9\u03B3\u03AE\u03C2 \u03BA\u03CE\u03B4\u03B9\u03BA\u03B1
+CodeGeneratorEmittersPoolFactory.componentCompiled=\u03A3\u03CD\u03BD\u03B8\u03B5\u03C3\u03B7 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD \u03C3\u03B5 {0} ms
+CodeGeneratorEmittersPoolFactory.failCompail=\u03A3\u03CD\u03BD\u03B8\u03B5\u03C3\u03B7 \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD \u03B1\u03C0\u03AD\u03C4\u03C5\u03C7\u03B5: \r\n
+CodeGeneratorEmittersPoolFactory.initialException=\u0395\u03BE\u03B1\u03AF\u03C1\u03B5\u03C3\u03B7 \u03BA\u03B1\u03C4\u03AC \u03C4\u03B7\u03BD \u0391\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7
+CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03BA\u03B1\u03C4\u03AC \u03C4\u03B7\u03BD \u03B5\u03BA\u03BA\u03AF\u03BD\u03B7\u03C3\u03B7 JetEmitter
+CodeGeneratorService.invalidLanguage1=\u03BC\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03BF\u03C2 \u03C4\u03CD\u03C0\u03BF\u03C2 \u03B3\u03BB\u03CE\u03C3\u03C3\u03B1\u03C2.
+CodeGeneratorService.invalidLanguage2=\u03BC\u03B7 \u03AD\u03B3\u03BA\u03C5\u03C1\u03BF\u03C2 \u03C4\u03CD\u03C0\u03BF\u03C2 \u03B3\u03BB\u03CE\u03C3\u03C3\u03B1\u03C2.
+CodeGenInit.addMarkers=\u03A0\u03C1\u03BF\u03C3\u03B8\u03AE\u03BA\u03B7 \u03C3\u03B7\u03BC\u03AC\u03BD\u03C3\u03B5\u03C9\u03BD \u03C3\u03C4\u03BF \u03C7\u03CE\u03C1\u03BF \u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1\u03C2
+CodeGenInit.createProject=\u03B4\u03B7\u03BC\u03B9\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03AD\u03C1\u03B3\u03BF\u03C5 {0}
+CodeGenInit.deleteProject=\u03B4\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE \u03AD\u03C1\u03B3\u03BF\u03C5 {0}
+CodeGenInit.initTemplate=\u03B1\u03C1\u03C7\u03B9\u03BA\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7 \u03A0\u03C1\u03BF\u03C4\u03CD\u03C0\u03C9\u03BD
+CodeGenInit.removeLink=\u0391\u03C0\u03BF\u03BC\u03AC\u03BA\u03C1\u03C5\u03BD\u03C3\u03B7 \u03C3\u03C5\u03BD\u03B4\u03B5\u03B4\u03B5\u03BC\u03AD\u03BD\u03C9\u03BD \u03C0\u03CC\u03C1\u03C9\u03BD
+CodeGenInit.saveWorkspace=\u0391\u03C0\u03BF\u03B8\u03AE\u03BA\u03B5\u03C5\u03C3\u03B7 \u03C7\u03CE\u03C1\u03BF\u03C5 \u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1\u03C2
+DocumentRootImpl.mixed=\ (\u03BC\u03B9\u03BA\u03C4\u03CC\u03C2:
+TalendJetEmitter.compileFail=\u03C3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03C3\u03CD\u03BD\u03B8\u03B5\u03C3\u03B7\u03C2 : {0} : {1}
+TalendJetEmitter.exception=\u0395\u03BE\u03B1\u03AF\u03C1\u03B5\u03C3\u03B7 \u03C3\u03B5
+JetFilesProviderManager.unableLoad=\u0391\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 {0}JetFilesProviderManager.unableLoad
+ComponentsFactory.afterSystemComponent=\u03BC\u03B5\u03C4\u03AC \u03C4\u03BF \u03C3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03CC \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF \u03C3\u03C5\u03C3\u03C4\u03AE\u03BC\u03B1\u03C4\u03BF\u03C2
+ComponentsLocalProviderService.componentLoadError=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03C3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5;
+ComponentsLocalProviderService.talendExchangeError=\u03A3\u03C6\u03AC\u03BB\u03BC\u03B1 Talend Exchange
+ComponentsPreferencePage.ButtonLabel0=\u039F\u039A
+ComponentsPreferencePage.configuration.LINK_STYLE=\u0395\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C0\u03C1\u03BF\u03B5\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03C9\u03BD \u03C7\u03B1\u03C1\u03C4\u03BF\u03B3\u03C1\u03B1\u03C6\u03B9\u03BA\u03CE\u03BD \u03C3\u03C5\u03BD\u03B4\u03AD\u03C3\u03BC\u03C9\u03BD \u03C9\u03C2:
+ComponentsPreferencePage.rowLimit=\u038C\u03C1\u03B9\u03BF \u03B3\u03C1\u03B1\u03BC\u03BC\u03AE\u03C2
+ComponentsPreferencePage.WarningTitle=\u03A0\u03C1\u03BF\u03B5\u03B9\u03B4\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7
+ComponentsProviderManager.unableLoad=\u03B1\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03C0\u03B1\u03C1\u03CC\u03C7\u03BF\u03C5 \u03C3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03BF\u03CD \u03C3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF\u03C5
+ComponenttRunJobPreferencePage.label=\u039C\u03B7 \u03B5\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C4\u03B7\u03C2 \u03C3\u03C7\u03B5\u03C4\u03B9\u03BA\u03AE\u03C2 \u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1\u03C2 \u03BC\u03B5\u03C4\u03AC \u03C4\u03BF \u03B4\u03B9\u03C0\u03BB\u03CC \u03BA\u03BB\u03B9\u03BA \u03C3\u03B5 \u03AD\u03BD\u03B1 \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF tRunJob
+ComponenttRunJobPreferencePage.showCorrespondingJob=E\u03BC\u03C6\u03AC\u03BD\u03B9\u03C3\u03B7 \u03C4\u03B7\u03C2 \u03C3\u03C7\u03B5\u03C4\u03B9\u03BA\u03AE\u03C2 \u03B5\u03C1\u03B3\u03B1\u03C3\u03AF\u03B1\u03C2 \u03BC\u03B5\u03C4\u03AC \u03C4\u03BF \u03B4\u03B9\u03C0\u03BB\u03CC \u03BA\u03BB\u03B9\u03BA \u03C3\u03B5 \u03AD\u03BD\u03B1 \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03BF tRunJob
+XsdValidationCacheManager.unableLoadxsd=\u03B1\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03C6\u03CC\u03C1\u03C4\u03C9\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 xsd \u03BB\u03B1\u03BD\u03B8\u03AC\u03BD\u03BF\u03C5\u03C3\u03B1\u03C2 \u03BC\u03BD\u03AE\u03BC\u03B7\u03C2 \u03B5\u03C0\u03B9\u03BA\u03CD\u03C1\u03C9\u03C3\u03B7\u03C2 
+XsdValidationCacheManager.unableSavexsd=\u03B1\u03B4\u03C5\u03BD\u03B1\u03BC\u03AF\u03B1 \u03B1\u03C0\u03BF\u03B8\u03AE\u03BA\u03B5\u03C5\u03C3\u03B7\u03C2 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B5\u03C3\u03C9\u03C4\u03B5\u03C1\u03B9\u03BA\u03AE\u03C2 \u03BC\u03BD\u03AE\u03BC\u03B7\u03C2 \u03B5\u03C0\u03B9\u03BA\u03CD\u03C1\u03C9\u03C3\u03B7\u03C2 xsd
+prefs.configuration.LINK_STYLE.AUTO=\u0391\u03C5\u03C4\u03CC\u03BC\u03B1\u03C4\u03B1
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u039A\u03B1\u03BC\u03C0\u03CD\u03BB\u03B5\u03C2
+prefs.configuration.LINK_STYLE.LINE=\u0393\u03C1\u03B1\u03BC\u03BC\u03AD\u03C2 (\u03B3\u03C1\u03AE\u03B3\u03BF\u03C1\u03B1)
+FAMILY.AS400=AS400
+FAMILY.Access=Access
+FAMILY.Alfresco=Alfresco
+FAMILY.Business=\u03B5\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03C3\u03B9\u03B1\u03BA\u03CC
+FAMILY.Business_Intelligence=\u0395\u03C0\u03B9\u03C7\u03B5\u03B9\u03C1\u03B7\u03C3\u03B9\u03B1\u03BA\u03AE \u0395\u03C5\u03C6\u03C5\u03AF\u03B1
+FAMILY.CentricCRM=CentricCRM
+FAMILY.Charts=\u0394\u03B9\u03B1\u03B3\u03C1\u03AC\u03BC\u03BC\u03B1\u03C4\u03B1
+FAMILY.Connections=\u03A3\u03C5\u03BD\u03B4\u03AD\u03C3\u03B5\u03B9\u03C2
+FAMILY.Custom_Code=\u03A0\u03C1\u03BF\u03C3\u03B1\u03C1\u03BC\u03BF\u03C3\u03BC\u03AD\u03BD\u03BF\u03C2_\u039A\u03CE\u03B4\u03B9\u03BA\u03B1\u03C2
+FAMILY.DB2=DB2
+FAMILY.DB_Generic=\u0393\u03B5\u03BD\u03B9\u03BA\u03AE \u0392\u0394
+FAMILY.DB_SCD=DB SCD
+FAMILY.Data_Quality=\u03A0\u03BF\u03B9\u03CC\u03C4\u03B7\u03C4\u03B1 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+FAMILY.Databases=\u0392\u03AC\u03C3\u03B5\u03B9\u03C2 \u0394\u03B5\u03B4\u03BF\u03BC\u03AD\u03BD\u03C9\u03BD
+FAMILY.ELT=ELT
+FAMILY.FTP=ftp
+FAMILY.Fields=\u03A0\u03B5\u03B4\u03AF\u03B1
+FAMILY.File=\u0391\u03C1\u03C7\u03B5\u03AF\u03BF
+FAMILY.FireBird=Firebird
+FAMILY.Greenplum=Greenplum
+FAMILY.HSQLDb=HSQLdb
+FAMILY.Informix=Informix
+FAMILY.Ingres=Ingres
+FAMILY.Input=\u0395\u03AF\u03C3\u03BF\u03B4\u03BF\u03C2
+FAMILY.Interbase=Interbase
+FAMILY.Internet=\u0394\u03B9\u03B1\u03B4\u03AF\u03BA\u03C4\u03C5\u03BF
+FAMILY.Jasper=Jasper
+FAMILY.JavaDB=JavaDB
+FAMILY.JDBC=JDBC
+FAMILY.LDAP=LDAP
+FAMILY.Logs_Errors=\u0399\u03C3\u03C4\u03BF\u03C1\u03B9\u03BA\u03CC & \u03A3\u03C6\u03AC\u03BB\u03BC\u03B1\u03C4\u03B1
+FAMILY.MS_SQL_Server=MS SQL Server
+FAMILY.MSSql=MSSQL
+FAMILY.Management=\u0394\u03B9\u03B1\u03C7\u03B5\u03AF\u03C1\u03B9\u03C3\u03B7
+FAMILY.MaxDB=MaxDB
+FAMILY.Microsoft_AX=Microsoft AX
+FAMILY.Misc=\u0394\u03B9\u03AC\u03C6\u03BF\u03C1\u03B1
+FAMILY.MySQL=MySQL
+FAMILY.Netezza=Netezza
+FAMILY.OLAP_Cube=OLAP \u039A\u03CD\u03B2\u03BF\u03C2
+FAMILY.Oracle=Oracle
+FAMILY.Orchestration=\u0395\u03BD\u03BF\u03C1\u03C7\u03AE\u03C3\u03C4\u03C1\u03C9\u03C3\u03B7
+FAMILY.Output=\u0388\u03BE\u03BF\u03B4\u03BF\u03C2
+FAMILY.ParAccel=Paraccel
+FAMILY.PostgreSQL=PostgreSQL
+FAMILY.PostgresPlus=PostgresPlus
+FAMILY.SCP=SCP
+FAMILY.SPSS=SPSS
+FAMILY.SQLite=SQLite
+FAMILY.Salesforce=Salesforce
+FAMILY.SugarCRM=SugarCRM
+FAMILY.Sybase=Sybase
+FAMILY.System=\u03A3\u03CD\u03C3\u03C4\u03B7\u03BC\u03B1
+FAMILY.Technical=\u03A4\u03B5\u03C7\u03BD\u03B9\u03BA\u03CC
+FAMILY.Teradata=Teradata
+FAMILY.Vertica=Vertica
+FAMILY.VtigerCRM=VtigerCRM
+FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_en.properties

@@ -2,7 +2,7 @@ JavaRoutineSynchronizer.UnsupportedOperation.Exception1=method not implemented:
 CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=JETEmitters Project not present, full reinitialize is needed
 generatedcode.footerprocess.nbcharsgenerated={0} characters generated by {1}
 CodeGeneratorEmittersPoolFactory.Class.NotFound=Template still present, but class {0} has disapeared from workspace. This unit needs to be recompiled.
-CodeGeneratorEmittersPoolFactory.PersitentData.Error=Persitent data cannot be saved :
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=Persitent data cannot be saved : 
 generatedcode.copyright.title=Copyright (c) 2005-2011, Talend Inc.
 CodeGeneratorEmittersPoolFactory.initMessage=Generation Engine Initialization in progress...
 generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html).
@@ -35,7 +35,7 @@ CodeGenInit.removeLink=Remove linked resources
 CodeGenInit.saveWorkspace=Saving workspace
 DocumentRootImpl.mixed=\ (mixed:
 NodesSubTree.enableParallel=__ENABLE_PARALLEL__
-PoolTypeImpl.persistentPool= \ (persistentPool:
+PoolTypeImpl.persistentPool=\ (persistentPool:
 TalendJetEmitter.compileFail=\ compile fail : {0} : {1}
 TalendJetEmitter.exception=Exception on
 JetFilesProviderManager.unableLoad=Unable to load {0}JetFilesProviderManager.unableLoad
@@ -84,7 +84,7 @@ FAMILY.eXist=eXist
 FAMILY.FTP=FTP
 FAMILY.Fields=Fields
 FAMILY.File=File
-FAMILY.FireBird=FireBird
+FAMILY.FireBird=Firebird
 FAMILY.Greenplum=Greenplum
 FAMILY.HSQLDb=HSQLDb
 FAMILY.Healthcare=Healthcare
@@ -140,9 +140,3 @@ ComponentsPreferencePage_SuccessMessage1=Need restart studio to load the new com
 ComponentsPreferencePage_SuccessMessage2=Do you want to restart right now?
 ComponentsPreferencePage.installComponentsFailure=Install components failure
 generatedcode.copyright.body1=This source code has been automatically generated by {0}
-ComponentsFactory.init.waitForFinish.timeout=Can't initialise ComponentsFactory, please try again.
-FAMILY.Data_Privacy=Data Privacy
-ComponentsPreferencePage.enableOnLineHelp=Enable online help for components
-ComponentsPreferencePage.titleInstallHelp=Install offline help feature?
-ComponentsPreferencePage.msgInstallHelp=This will open additional packages dialog to install offline help feature, do you want to continue?
-ComponentsPreferencePage.grpHelp=Help

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_es.properties

@@ -2,11 +2,11 @@ CodeGenerator.newLine=\n\n\n\n
 CodeGenInit.createProject=Crear proyecto {0}
 CodeGenInit.deleteProject=Borrar proyecto {0}
 CodeGenInit.saveWorkspace=Guardando Espacio de Trabajo
-CodeGeneratorEmittersPoolFactory.operationCanceled=Operaci\u00F3n Cancelada
-ComponentsPreferencePage.rowLimit=L\u00EDmite de filas
+CodeGeneratorEmittersPoolFactory.operationCanceled=Operación Cancelada
+ComponentsPreferencePage.rowLimit=Límite de filas
 ComponentsPreferencePage.WarningTitle=Advertencia
-XsdValidationCacheManager.unableLoadxsd=no se puede cargar archivo de cach\u00E9 de validaci\u00F3n xsd
-XsdValidationCacheManager.unableSavexsd=imposible guardar archivo de cach\u00E9 de validaci\u00F3n xsd
+XsdValidationCacheManager.unableLoadxsd=no se puede cargar archivo de caché de validación xsd
+XsdValidationCacheManager.unableSavexsd=imposible guardar archivo de caché de validación xsd
 FAMILY.AS400=AS400
 FAMILY.Access=Access
 FAMILY.Business=negocio

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_fr.properties

@@ -1,62 +1,62 @@
-JavaRoutineSynchronizer.UnsupportedOperation.Exception1=M\u00E9thode non impl\u00E9ment\u00E9e : org.talend.designer.codegen.JavaRoutineSynchronizer line:49
-CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Le projet JETEmitters est introuvable, une r\u00E9initialisation compl\u00E8te est requise
-generatedcode.footerprocess.nbcharsgenerated={0} caract\u00E8res g\u00E9n\u00E9r\u00E9s par {1}
-CodeGeneratorEmittersPoolFactory.Class.NotFound=Le template est toujours pr\u00E9sent, mais la classe {0} a disparue. Cette fonction doit d'\u00EAtre recompil\u00E9e.
-CodeGeneratorEmittersPoolFactory.PersitentData.Error=Les donn\u00E9es persistantes ne peuvent pas \u00EAtre enregistr\u00E9es : 
+JavaRoutineSynchronizer.UnsupportedOperation.Exception1=Méthode non implémentée : org.talend.designer.codegen.JavaRoutineSynchronizer line:49
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Le projet JETEmitters est introuvable, une réinitialisation complète est requise
+generatedcode.footerprocess.nbcharsgenerated={0} caractères générés par {1}
+CodeGeneratorEmittersPoolFactory.Class.NotFound=Le template est toujours présent, mais la classe {0} a disparue. Cette fonction doit d'être recompilée.
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=Les données persistantes ne peuvent pas être enregistrées : 
 generatedcode.copyright.title=Copyright (c) 2005-2011, Talend Inc.
-CodeGeneratorEmittersPoolFactory.initMessage=L'initialisation du moteur de g\u00E9n\u00E9ration est en cours...
+CodeGeneratorEmittersPoolFactory.initMessage=L'initialisation du moteur de génération est en cours...
 generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html).
-EmfEmittersPersistence.CodeGen.DataMissing=Donn\u00E9e de g\u00E9n\u00E9ration de code manquante. D\u00E9but de g\u00E9n\u00E9ration du code entier.
-CodeGenerator.JET.TimeOut=D\u00E9lai d'initialisation JET d\u00E9pass\u00E9
+EmfEmittersPersistence.CodeGen.DataMissing=Donnée de génération de code manquante. Début de génération du code entier.
+CodeGenerator.JET.TimeOut=Délai d'initialisation JET dépassé
 generatedcode.copyright.body4=Vous pouvez distribuer ce code sous les termes de la licence GNU LGPL
 CodeGenerator.Node.NotFound=Noeud introuvable dans le processus courant
 generatedcode.copyright.body3=Vous pouvez trouver plus d'informations sur les produits Talend sur www.talend.com.
 EmittersPoolFactoryImpl.Class.IllegalArg=La classe '{0}' n'est pas un classifiant valide
 generatedcode.copyright.body2=/ JobDesigner (CodeGenerator version {0}).
-JavaRoutineSynchronizer.UnsupportedOperation.Exception2=M\u00E9thode non impl\u00E9ment\u00E9e : org.talend.designer.codegen.JavaRoutineSynchronizer line:58
+JavaRoutineSynchronizer.UnsupportedOperation.Exception2=Méthode non implémentée : org.talend.designer.codegen.JavaRoutineSynchronizer line:58
 CodeGenerator.getGraphicalNode1=------process.getGraphicalNodes()------
 CodeGenerator.getGraphicalNode2=------process.getGeneratingNodes()------
 CodeGenerator.newLine=\n\n\n\n
-JetSkeletonManager.unableLoad=Impossible de charger le fichier de cache de la mise \u00E0 jour du squelette
-JetSkeletonManager.unableSave=impossible d'enregistrer le fichier de cache de la mise \u00E0 jour skeleton
-JetSkeletonManager.updateProblem=quand les donn\u00E9es persistantes du squelette sont mises \u00E0 jour, il y a des probl\u00E8mes.
-CodeGeneratorEmittersPoolFactory.codeThread=G\u00E9n\u00E9ration de code en arri\u00E8re-plan
-CodeGeneratorEmittersPoolFactory.componentCompiled=Composants compil\u00E9s en {0} ms
-CodeGeneratorEmittersPoolFactory.failCompail=\u00C9chec de compilation des composants \: \r\n
+JetSkeletonManager.unableLoad=Impossible de charger le fichier de cache de la mise à jour du squelette
+JetSkeletonManager.unableSave=impossible d'enregistrer le fichier de cache de la mise à jour skeleton
+JetSkeletonManager.updateProblem=quand les données persistantes du squelette sont mises à jour, il y a des problèmes.
+CodeGeneratorEmittersPoolFactory.codeThread=Génération de code en arrière-plan
+CodeGeneratorEmittersPoolFactory.componentCompiled=Composants compilés en {0} ms
+CodeGeneratorEmittersPoolFactory.failCompail=Échec de compilation des composants \: \r\n
 CodeGeneratorEmittersPoolFactory.initialException=Exception durant l'initialisation
 CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=Erreur d'initialisation de JetEmitter
 CodeGeneratorService.invalidLanguage1=Type de langage invalide.
 CodeGeneratorService.invalidLanguage2=Type de langage invalide.
 CodeGenInit.addMarkers=Ajouter des marqueurs dans l'espace de travail
-CodeGenInit.createProject=Cr\u00E9er le projet {0}
+CodeGenInit.createProject=Créer le projet {0}
 CodeGenInit.deleteProject=Supprimer le projet {0}
 CodeGenInit.initTemplate=Init templates
-CodeGenInit.removeLink=Supprimer les ressources li\u00E9es
+CodeGenInit.removeLink=Supprimer les ressources liées
 CodeGenInit.saveWorkspace=Enregistrement de l'espace de travail
-DocumentRootImpl.mixed=(mix\u00E9\:
+DocumentRootImpl.mixed=(mixé\:
 NodesSubTree.enableParallel=__ENABLE_PARALLEL__
 PoolTypeImpl.persistentPool=(PoolPersistant \:
 TalendJetEmitter.compileFail= erreur de compilation : {0} : {1}
 TalendJetEmitter.exception=Exception sur
 JetFilesProviderManager.unableLoad=Impossible de charger {0} JetFilesProviderManager.unableLoad
-CodeGeneratorEmittersPoolFactory.dialogContent=La g\u00E9n\u00E9ration JetEmitter est annul\u00E9e, afin d'\u00E9viter des probl\u00E8mes, veuillez appuyez sur Ctrl+Maj+F3 pour g\u00E9n\u00E9rer \u00E0 nouveau.
-CodeGeneratorEmittersPoolFactory.operationCanceled=Op\u00E9ration annul\u00E9e
-ComponentsFactory.afterSystemComponent=apr\u00E8s le(s) composant(s) syst\u00E8me
+CodeGeneratorEmittersPoolFactory.dialogContent=La génération JetEmitter est annulée, afin d'éviter des problèmes, veuillez appuyez sur Ctrl+Maj+F3 pour générer à nouveau.
+CodeGeneratorEmittersPoolFactory.operationCanceled=Opération annulée
+ComponentsFactory.afterSystemComponent=après le(s) composant(s) système
 ComponentsFactory.componentNotFound=Impossible de trouver le dossier du composant :
 ComponentsFactory.load.components=Chargement des composants...
-ComponentsFactory.parentNotRecompiled=Attention\: les parents de *.inc.javajet ne sont pas recompil\u00E9s.
+ComponentsFactory.parentNotRecompiled=Attention\: les parents de *.inc.javajet ne sont pas recompilés.
 ComponentsLocalProviderService.componentLoadError=Erreur de chargement du composant
 ComponentsLocalProviderService.talendExchangeError=Erreur de Talend Exchange
 ComponentsPreferencePage.ButtonLabel0=OK
-ComponentsPreferencePage.configuration.LINK_STYLE=Les liens de mapping par d\u00E9faut s'affichent comme :
+ComponentsPreferencePage.configuration.LINK_STYLE=Les liens de mapping par défaut s'affichent comme :
 ComponentsPreferencePage.rowLimit=Limite de lignes
-ComponentsPreferencePage.WarningMsg=Vous devez red\u00E9marrer Talend Open Studio afin de charger les composants suppl\u00E9mentaires.
+ComponentsPreferencePage.WarningMsg=Vous devez redémarrer Talend Open Studio afin de charger les composants supplémentaires.
 ComponentsPreferencePage.WarningTitle=Avertissement
 ComponentsPreferencePage.directoryFieldLabel=Dossier des composants utilisateur :
 ComponentsProviderManager.unableLoad=Impossible de charger un fournisseur de composant
-ComponenttRunJobPreferencePage.label=Ne pas afficher le Job correspondant apr\u00E8s un double-clic sur un composant tRunJob.
-ComponentJobletPreferencePage.label=Ne pas afficher le Job correspondant apr\u00E8s un double-clic sur un composant Joblet.
-ComponenttRunJobPreferencePage.showCorrespondingJob=Afficher le Job correspondant apr\u00E8s un double-clic sur un composant tRunJob.
+ComponenttRunJobPreferencePage.label=Ne pas afficher le Job correspondant après un double-clic sur un composant tRunJob.
+ComponentJobletPreferencePage.label=Ne pas afficher le Job correspondant après un double-clic sur un composant Joblet.
+ComponenttRunJobPreferencePage.showCorrespondingJob=Afficher le Job correspondant après un double-clic sur un composant tRunJob.
 XsdValidationCacheManager.unableLoadxsd=impossible de charger le fichier de cache de validation xsd
 XsdValidationCacheManager.unableSavexsd=impossible d'enregistrer le fichier de cache de validation xsd
 prefs.configuration.LINK_STYLE.AUTO=Auto
@@ -65,18 +65,18 @@ prefs.configuration.LINK_STYLE.LINE=Lignes (rapide)
 FAMILY.AS400=AS400
 FAMILY.Access=Access
 FAMILY.Alfresco=Alfresco
-FAMILY.Business=Applications M\u00E9tier
+FAMILY.Business=Applications Métier
 FAMILY.Business_Intelligence=Business Intelligence
 FAMILY.CentricCRM=CentricCRM
 FAMILY.Charts=Graphiques
 FAMILY.Connections=Connexions
 FAMILY.Custom_Code=Code Utilisateur
 FAMILY.DB2=DB2
-FAMILY.DB_Generic=Base de donn\u00E9es g\u00E9n\u00E9rique
-FAMILY.DB_JDBC=Base de donn\u00E9es JDBC
+FAMILY.DB_Generic=Base de données générique
+FAMILY.DB_JDBC=Base de données JDBC
 FAMILY.DB_SCD=DB SCD
-FAMILY.Data_Quality=Qualit\u00E9 de donn\u00E9es
-FAMILY.Databases=Bases de donn\u00E9es
+FAMILY.Data_Quality=Qualité de données
+FAMILY.Databases=Bases de données
 FAMILY.ELT=ELT
 FAMILY.ESB=ESB
 FAMILY.EXASolution=EXASolution
@@ -111,7 +111,7 @@ FAMILY.Netezza=Netezza
 FAMILY.OLAP_Cube=Cube OLAP
 FAMILY.Oracle=Oracle
 FAMILY.Orchestration=Orchestration
-FAMILY.Output=\u00C9criture
+FAMILY.Output=Écriture
 FAMILY.ParAccel=Paraccel
 FAMILY.PostgreSQL=PostgreSQL
 FAMILY.PostgresPlus=PostgresPlus
@@ -125,21 +125,16 @@ FAMILY.SQLite=SQLite
 FAMILY.Salesforce=Salesforce
 FAMILY.SugarCRM=SugarCRM
 FAMILY.Sybase=Sybase
-FAMILY.System=Syst\u00E8me
+FAMILY.System=Système
 FAMILY.Technical=Technique
 FAMILY.Teradata=Teradata
 FAMILY.Vertica=Vertica
 FAMILY.VtigerCRM=VtigerCRM
 FAMILY.XML=XML
-CodeGeneratorEmittersPoolFactory.updatePaletteForEditors=Mettre \u00E0 jour la palette pour les \u00E9diteurs
-ComponentsPreferencePage.componentAssist=Activer l'assistant de cr\u00E9ation de composant
-ComponentsPreferencePage.notValidDirectory=Votre s\u00E9lection va imbriquer des dossiers, ce n'est pas recommand\u00E9. Continuer ?
+CodeGeneratorEmittersPoolFactory.updatePaletteForEditors=Mettre à jour la palette pour les éditeurs
+ComponentsPreferencePage.componentAssist=Activer l'assistant de création de composant
+ComponentsPreferencePage.notValidDirectory=Votre sélection va imbriquer des dossiers, ce n'est pas recommandé. Continuer ?
 ComponentsFactory.loadComponents.missingFolder=Le plug-in "{1}" manque dans le dossier "{0}".
-ComponentsPreferencePage_SuccessMessage1=Red\u00E9marrez le Studio pour charger les nouveaux composants. Sinon,ils seront charg\u00E9s au prochain d\u00E9marrage.
-ComponentsPreferencePage_SuccessMessage2=Red\u00E9marrer maintenant ?
-ComponentsPreferencePage.installComponentsFailure=\u00C9chec de l'installation des composants
-ComponentsFactory.init.waitForFinish.timeout=Impossible d\'initialiser ComponentsFactory, veuillez r\u00E9essayer.
-ComponentsPreferencePage.enableOnLineHelp=Activer l\'aide en ligne pour les composants
-ComponentsPreferencePage.titleInstallHelp=Installer la fonctionnalit\u00E9 d\'aide hors ligne\u00A0?
-ComponentsPreferencePage.msgInstallHelp=Cela va ouvrir une bo\u00EEte de dialogue de packages suppl\u00E9mentaires pour installer la fonctionnalit\u00E9 d\'aide hors ligne, continuer ?
-ComponentsPreferencePage.grpHelp=Aide
+ComponentsPreferencePage_SuccessMessage1=Redémarrez le Studio pour charger les nouveaux composants. Sinon,ils seront chargés au prochain démarrage.
+ComponentsPreferencePage_SuccessMessage2=Redémarrer maintenant ?
+ComponentsPreferencePage.installComponentsFailure=Échec de l'installation des composants

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_hr.properties

@@ -0,0 +1,28 @@
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Projekt za JETEmitter nije prisutan, potrebna je potpuna reinicijalizacija
+CodeGeneratorEmittersPoolFactory.Class.NotFound=Predlo\u017Eake je prisutan, ali klasa {0} je nestala iz radnog prostora. Ovu jedinicu treba prekompajlirati.
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=perzistentne podatke nije mogu\u0107e spremiti:
+CodeGeneratorEmittersPoolFactory.initMessage=Inicijalizacija Engine-a za generiranje je u toku...
+CodeGenerator.Node.NotFound=\u010Cvor nije prona\u0111en u trenutnom procesu
+CodeGeneratorEmittersPoolFactory.codeThread=Pozadinska nit za generiranje koda
+CodeGeneratorEmittersPoolFactory.componentCompiled=Komponente su iskompajlirane u {0} ms
+CodeGeneratorEmittersPoolFactory.failCompail=Neuspjelo kompajliranje komponenti: rn
+CodeGeneratorEmittersPoolFactory.initialException=Iznimka prilikom inicijaliziranja
+CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=Gre\u0161ka prilikom inicijaliziranja JetEmmitera
+CodeGeneratorService.invalidLanguage1=Neispravan tip jezika.
+CodeGeneratorService.invalidLanguage2=Neispravan tip jezika.
+CodeGenInit.addMarkers=Dodavanje markera radnom prostoru
+CodeGenInit.createProject=kreiraj {0} projekt
+CodeGenInit.deleteProject=obri\u0161i {0}projekt
+CodeGenInit.initTemplate=init Predlo\u017Eaka
+CodeGenInit.removeLink=Ukloni povezane resurse
+CodeGenInit.saveWorkspace=Spremanje radnog prostora
+ComponentsPreferencePage.ButtonLabel0=U redu
+ComponentsPreferencePage.WarningTitle=Upozorenje
+XsdValidationCacheManager.unableLoadxsd=Ne mogu u\u010Ditati cache datoteku za xsd validaciju
+XsdValidationCacheManager.unableSavexsd=Ne mogu usnimiti cache datoteku za xsd validaciju
+FAMILY.Connections=Konekcije
+FAMILY.Input=Unos
+FAMILY.MySQL=MySQL
+FAMILY.Oracle=Oracle
+FAMILY.PostgreSQL=PostgreSQL
+FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_it.properties

@@ -1,6 +1,6 @@
-CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Progetto JETEmmitters non presente, \u00E8 necessario reinizializzare
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Progetto JETEmmitters non presente, è necessario reinizializzare
 generatedcode.footerprocess.nbcharsgenerated={0} caratteri generati da {1}
-CodeGeneratorEmittersPoolFactory.Class.NotFound=Il template \u00E8 presente, ma la classe {0} \u00E8 sparita. Questa funzione dev'essere ricompilata.
+CodeGeneratorEmittersPoolFactory.Class.NotFound=Il template è presente, ma la classe {0} è sparita. Questa funzione dev'essere ricompilata.
 CodeGeneratorEmittersPoolFactory.PersitentData.Error=I dati persistenti non possono essere salvati:
 generatedcode.copyright.title=Copyright (c) 2005-2009, Talend Inc.
 CodeGeneratorEmittersPoolFactory.initMessage=Inizializzazione del motore di generazione in corso...

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_ja.properties

@@ -16,13 +16,13 @@ generatedcode.copyright.body2=/ JobDesigner (CodeGenerator\u30D0\u30FC\u30B8\u30
 JavaRoutineSynchronizer.UnsupportedOperation.Exception2=\u30E1\u30BD\u30C3\u30C9\u304C\u5B9F\u88C5\u3055\u308C\u3066\u3044\u307E\u305B\u3093: org.talend.designer.codegen.JavaRoutineSynchronizer line:58
 CodeGenerator.getGraphicalNode1=------process.getGraphicalNodes()------
 CodeGenerator.getGraphicalNode2=------process.getGeneratingNodes()------
-CodeGenerator.newLine=\\n\\n\\n\\n
+CodeGenerator.newLine=\n\n\n\n
 JetSkeletonManager.unableLoad=\u30B9\u30B1\u30EB\u30C8\u30F3\u66F4\u65B0\u30AD\u30E3\u30C3\u30B7\u30E5\u30D5\u30A1\u30A4\u30EB\u3092\u30ED\u30FC\u30C9\u3067\u304D\u307E\u305B\u3093
 JetSkeletonManager.unableSave=\u30B9\u30B1\u30EB\u30C8\u30F3\u66F4\u65B0\u30AD\u30E3\u30C3\u30B7\u30E5\u30D5\u30A1\u30A4\u30EB\u3092\u4FDD\u5B58\u3067\u304D\u307E\u305B\u3093
 JetSkeletonManager.updateProblem=\u30B9\u30B1\u30EB\u30C8\u30F3\u6C38\u7D9A\u30C7\u30FC\u30BF\u66F4\u65B0\u6642\u306B\u30A8\u30E9\u30FC\u304C\u767A\u751F\u3057\u307E\u3057\u305F
 CodeGeneratorEmittersPoolFactory.codeThread=\u30B3\u30FC\u30C9\u751F\u6210\u306E\u30D0\u30C3\u30AF\u30B0\u30E9\u30A6\u30F3\u30C9\u30B9\u30EC\u30C3\u30C9
 CodeGeneratorEmittersPoolFactory.componentCompiled=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306F{0}\u30DF\u30EA\u79D2\u3067\u30B3\u30F3\u30D1\u30A4\u30EB\u3055\u308C\u307E\u3057\u305F
-CodeGeneratorEmittersPoolFactory.failCompail=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30B3\u30F3\u30D1\u30A4\u30EB\u306B\u5931\u6557\u3057\u307E\u3057\u305F : \\r\\n
+CodeGeneratorEmittersPoolFactory.failCompail=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30B3\u30F3\u30D1\u30A4\u30EB\u306B\u5931\u6557\u3057\u307E\u3057\u305F : \r\n
 CodeGeneratorEmittersPoolFactory.initialException=\u521D\u671F\u5316\u4E2D\u306B\u4F8B\u5916\u304C\u767A\u751F\u3057\u307E\u3057\u305F
 CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=JetEmitter\u306E\u521D\u671F\u5316\u4E2D\u306B\u30A8\u30E9\u30FC\u304C\u767A\u751F\u3057\u307E\u3057\u305F
 CodeGeneratorService.invalidLanguage1=\u7121\u52B9\u306A\u8A00\u8A9E\u30BF\u30A4\u30D7\u3067\u3059\u3002
@@ -82,7 +82,7 @@ FAMILY.ESB=ESB
 FAMILY.EXASolution=EXASolution
 FAMILY.eXist=eXist
 FAMILY.FTP=ftp
-FAMILY.Fields=\u9805\u76EE\u5024
+FAMILY.Fields=\u30D5\u30A3\u30FC\u30EB\u30C9
 FAMILY.File=\u30D5\u30A1\u30A4\u30EB
 FAMILY.FireBird=Firebird
 FAMILY.Greenplum=Greenplum
@@ -91,7 +91,7 @@ FAMILY.Healthcare=\u30D8\u30EB\u30B9\u30B1\u30A2
 FAMILY.Hive=Hive
 FAMILY.Informix=Informix
 FAMILY.Ingres=Ingres
-FAMILY.Input=\u30D5\u30A1\u30A4\u30EB\u5165\u529B
+FAMILY.Input=Input (\u5165\u529B)
 FAMILY.Interbase=Interbase
 FAMILY.Internet=\u30A4\u30F3\u30BF\u30FC\u30CD\u30C3\u30C8
 FAMILY.Jasper=Jasper
@@ -111,22 +111,22 @@ FAMILY.Netezza=Netezza
 FAMILY.OLAP_Cube=OLAP\u30AD\u30E5\u30FC\u30D6
 FAMILY.Oracle=Oracle
 FAMILY.Orchestration=\u30D7\u30ED\u30BB\u30B9\u5236\u5FA1
-FAMILY.Output=\u30D5\u30A1\u30A4\u30EB\u51FA\u529B
+FAMILY.Output=\u51FA\u529B
 FAMILY.ParAccel=ParAccel
 FAMILY.PostgreSQL=PostgreSQL
 FAMILY.PostgresPlus=PostgresPlus
-FAMILY.Processing=\u5909\u63DB\u51E6\u7406
+FAMILY.Processing=\u51E6\u7406\u4E2D
 FAMILY.SAP=SAP
 FAMILY.Sas=SAS
 FAMILY.SCD=SCD
 FAMILY.SCP=SCP
 FAMILY.SPSS=SPSS
 FAMILY.SQLite=SQLite
-FAMILY.Salesforce=Salesforce
+FAMILY.Salesforce=Salesforce (\u30BB\u30FC\u30EB\u30B9\u30D5\u30A9\u30FC\u30B9)
 FAMILY.SugarCRM=SugarCRM
 FAMILY.Sybase=Sybase
 FAMILY.System=\u30B7\u30B9\u30C6\u30E0
-FAMILY.Technical=\u30C6\u30AF\u30CB\u30AB\u30EB
+FAMILY.Technical=\u6280\u8853
 FAMILY.Teradata=Teradata
 FAMILY.Vertica=Vertica
 FAMILY.VtigerCRM=VtigerCRM
@@ -140,9 +140,3 @@ ComponentsPreferencePage_SuccessMessage1=\u65B0\u898F\u30B3\u30F3\u30DD\u30FC\u3
 ComponentsPreferencePage_SuccessMessage2=\u518D\u8D77\u52D5\u3057\u307E\u3059\u304B\uFF1F
 ComponentsPreferencePage.installComponentsFailure=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u306B\u5931\u6557\u3057\u307E\u3057\u305F
 generatedcode.copyright.body1=\u3053\u306E\u30BD\u30FC\u30B9\u30B3\u30FC\u30C9\u306F{0}\u306B\u3088\u3063\u3066\u81EA\u52D5\u7684\u306B\u751F\u6210\u3055\u308C\u307E\u3057\u305F
-ComponentsFactory.init.waitForFinish.timeout=ComponentsFactory\u3092\u521D\u671F\u5316\u3067\u304D\u307E\u305B\u3093\u3002\u3082\u3046\u4E00\u5EA6\u8A66\u3057\u3066\u4E0B\u3055\u3044\u3002
-FAMILY.Data_Privacy=\u30C7\u30FC\u30BF\u30D7\u30E9\u30A4\u30D0\u30B7\u30FC
-ComponentsPreferencePage.enableOnLineHelp=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30AA\u30F3\u30E9\u30A4\u30F3\u30D8\u30EB\u30D7\u3092\u6709\u52B9\u5316
-ComponentsPreferencePage.titleInstallHelp=\u30AA\u30D5\u30E9\u30A4\u30F3\u30D8\u30EB\u30D7\u6A5F\u80FD\u3092\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u3057\u307E\u3059\u304B?
-ComponentsPreferencePage.msgInstallHelp=\u3053\u308C\u306B\u3088\u3063\u3066\u8FFD\u52A0\u30D1\u30C3\u30B1\u30FC\u30B8\u306E\u30C0\u30A4\u30A2\u30ED\u30B0\u304C\u958B\u304D\u3001\u30AA\u30D5\u30E9\u30A4\u30F3\u30D8\u30EB\u30D7\u6A5F\u80FD\u304C\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u3055\u308C\u307E\u3059\u3002\u7D9A\u884C\u3057\u307E\u3059\u304B?
-ComponentsPreferencePage.grpHelp=\u30D8\u30EB\u30D7

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_kr.properties

@@ -0,0 +1,4 @@
+CodeGenInit.createProject={0}\uD504\uB85C\uC81D\uD2B8 \uC0DD\uC131
+CodeGenInit.deleteProject={0}\uD504\uB85C\uC81D\uD2B8 \uC0AD\uC81C
+FAMILY.Access=Access
+FAMILY.Input=\uC785\uB825

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_nl.properties

@@ -0,0 +1,5 @@
+prefs.configuration.LINK_STYLE.AUTO=Automatisch
+prefs.configuration.LINK_STYLE.BEZIER_CURVE=Rondingen
+prefs.configuration.LINK_STYLE.LINE=Lijnen (snel)
+FAMILY.Access=Toegang
+FAMILY.Connections=Verbindingen

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_pl.properties

@@ -0,0 +1,79 @@
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Brak projektu JETEmitters, wymagana ponowna pe\u0142na inicjalizacja
+CodeGeneratorEmittersPoolFactory.Class.NotFound=Szablon nadal dost\u0119pny ale klasa {0} znikn\u0119\u0142a z obszaru roboczego. Nale\u017Cy zrekompilowa\u0107 jednostk\u0119.
+CodeGenerator.JET.TimeOut=Timeout inicjalizacji JET
+CodeGenerator.Node.NotFound=Nie znaleziono ga\u0142\u0119zi procesu
+CodeGenerator.newLine=\n\n\n\n
+CodeGeneratorEmittersPoolFactory.componentCompiled=Komponenty skompilowane w {0} ms
+CodeGeneratorEmittersPoolFactory.failCompail=Nieudana kompilacja komponentów: \r\n
+CodeGeneratorEmittersPoolFactory.initialException=Wyj\u0105tek podczas inicjalizacji
+CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=B\u0142\u0105d podcza inicjalizacji JetEmitter
+CodeGeneratorService.invalidLanguage1=niepoprawny typ j\u0119zyka.
+CodeGeneratorService.invalidLanguage2=niepoprawny typ j\u0119zyka.
+CodeGenInit.addMarkers=Dodanie znaczników do obszaru roboczego
+CodeGenInit.createProject=utwórz {0} projekt
+CodeGenInit.deleteProject=skasuj {0} projekt
+CodeGenInit.removeLink=Skasuj po\u0142\u0105czone zasoby
+CodeGenInit.saveWorkspace=Zapisywanie obszaru roboczego
+TalendJetEmitter.exception=Wyj\u0105tek w 
+CodeGeneratorEmittersPoolFactory.operationCanceled=Operacja anulowana
+ComponentsLocalProviderService.componentLoadError=B\u0142\u0105d \u0142adowania komponentu
+ComponentsLocalProviderService.talendExchangeError=B\u0142\u0105d Talend Exchange
+ComponentsPreferencePage.rowLimit=Limit wierszy
+ComponentsPreferencePage.WarningTitle=Ostrze\u017Cenie
+XsdValidationCacheManager.unableLoadxsd=nie mo\u017Cna za\u0142odowa\u0107 pliku cahce walidacji xsd
+XsdValidationCacheManager.unableSavexsd=nie mo\u017Cna zapisa\u0107 pliku cache walidacji xsd
+FAMILY.AS400=AS400
+FAMILY.Access=Access
+FAMILY.Alfresco=Alfresco
+FAMILY.Business_Intelligence=Business Intelligence
+FAMILY.CentricCRM=CentricCRM
+FAMILY.Charts=Wykresy
+FAMILY.Connections=Po\u0142\u0105czenia
+FAMILY.Custom_Code=Kod w\u0142asny
+FAMILY.DB2=DB2
+FAMILY.DB_Generic=DB Generic
+FAMILY.DB_SCD=DB SCD
+FAMILY.Data_Quality=Jako\u015B\u0107 danych
+FAMILY.Databases=Bazy danych
+FAMILY.eXist=Istnieje
+FAMILY.Fields=Pola
+FAMILY.File=Plik
+FAMILY.FireBird=Firebird
+FAMILY.Greenplum=Greenplum
+FAMILY.HSQLDb=HSQLdb
+FAMILY.Informix=Informix
+FAMILY.Ingres=Ingres
+FAMILY.Input=Wej\u015Bcie
+FAMILY.Interbase=Interbase
+FAMILY.Internet=Internet
+FAMILY.Jasper=Jasper
+FAMILY.JavaDB=JavaDB
+FAMILY.JDBC=JDBC
+FAMILY.LDAP=LDAP
+FAMILY.Logs_Errors=Logi i b\u0142\u0119dy
+FAMILY.MS_SQL_Server=MS SQL Server
+FAMILY.MSSql=MSSQL
+FAMILY.Management=Zarz\u0105danie
+FAMILY.MaxDB=MaxDB
+FAMILY.Microsoft_AX=Microsoft AX
+FAMILY.Misc=Ró\u017Cne
+FAMILY.MySQL=MySQL
+FAMILY.Netezza=Netezza
+FAMILY.OLAP_Cube=Kostka OLAP
+FAMILY.Oracle=Oracle
+FAMILY.Orchestration=Orkiestracja
+FAMILY.Output=Wyj\u015Bcie
+FAMILY.ParAccel=Paraccel
+FAMILY.PostgreSQL=PostgreSQL
+FAMILY.PostgresPlus=PostgresPlus
+FAMILY.Processing=Przetwarzanie
+FAMILY.SCP=SCP
+FAMILY.SPSS=SPSS
+FAMILY.SQLite=SQLite
+FAMILY.SugarCRM=SugarCRM
+FAMILY.Sybase=Sybase
+FAMILY.Technical=Techniczne
+FAMILY.Teradata=Teradata
+FAMILY.Vertica=Vertica
+FAMILY.VtigerCRM=VtigerCRM
+FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_pt_BR.properties

@@ -0,0 +1,56 @@
+CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=Projeto JETEmitters não existe, é necessário a reinicialização
+CodeGeneratorEmittersPoolFactory.Class.NotFound=Template ainda presente, mas a classe {0} disapareceu do workspace. Essa unidade precisa ser recompilada.
+CodeGeneratorEmittersPoolFactory.PersitentData.Error=Os dados não podem ser salvos:
+CodeGeneratorEmittersPoolFactory.initMessage=Inicialização da Engine de Geração em andamento...
+generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html).
+EmfEmittersPersistence.CodeGen.DataMissing=Falta de dados na geração de código. Iniciando a geração de código completo.
+CodeGenerator.JET.TimeOut=Inicialização do JET excedeu o limite de tempo
+CodeGenerator.Node.NotFound=Nodo não encontrado no processo atual
+EmittersPoolFactoryImpl.Class.IllegalArg=A classe '{0}' não é uma classe válida
+CodeGenerator.getGraphicalNode1=-----process.getGraphicalNodes()------
+CodeGenerator.getGraphicalNode2=------process.getGeneratingNodes()------
+CodeGenerator.newLine=\n\n\n\n
+CodeGeneratorEmittersPoolFactory.codeThread=Thread de background da geração de código
+CodeGeneratorEmittersPoolFactory.componentCompiled=Componentes compilados em {0}
+CodeGeneratorEmittersPoolFactory.failCompail=Compilação dos componentes falhou: \r\n
+CodeGeneratorEmittersPoolFactory.initialException=Erro durante a inicialização
+CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=Erro durante a inicialização do JetEmitter
+CodeGeneratorService.invalidLanguage1=Tipo de linguagem inválida
+CodeGeneratorService.invalidLanguage2=Tipo de linguagem inválida
+CodeGenInit.addMarkers=Adicionando marcadores ao workspace
+CodeGenInit.createProject=criar projeto {0}
+CodeGenInit.deleteProject=remover projeto {0}
+CodeGenInit.initTemplate=Templates de início
+CodeGenInit.removeLink=Remover recursos contectados
+CodeGenInit.saveWorkspace=Salvando workspace
+DocumentRootImpl.mixed=(misturado:
+ComponentsFactory.afterSystemComponent=após o componente do sistema
+ComponentsLocalProviderService.componentLoadError=Erro ao carregar componente
+ComponentsPreferencePage.ButtonLabel0=OK
+ComponentsPreferencePage.rowLimit=Limite de Linhas
+ComponentsPreferencePage.WarningTitle=Advertência
+ComponentsProviderManager.unableLoad=impossível carregar provider do componente
+ComponenttRunJobPreferencePage.label=Não mostrar job correspondente após duplo clique em um componente tRunJob.
+ComponenttRunJobPreferencePage.showCorrespondingJob=Visualizar trabalho correspondente após duplo clique no componente tRunJob.
+XsdValidationCacheManager.unableLoadxsd=Impossível carregar arquivo XSD do cache
+XsdValidationCacheManager.unableSavexsd=Impossível salvar arquivo XSD no cache
+FAMILY.AS400=AS400
+FAMILY.Access=Access
+FAMILY.Business=business
+FAMILY.Connections=Conexões
+FAMILY.DB2=DB2
+FAMILY.Databases=Base de dados
+FAMILY.FireBird=Firebird
+FAMILY.Input=Entrada
+FAMILY.Internet=Internet
+FAMILY.Jasper=Jasper
+FAMILY.Logs_Errors=Logs e Erros
+FAMILY.Management=Gerenciamento
+FAMILY.Output=Saída
+FAMILY.PostgresPlus=PostgresPlus
+FAMILY.Processing=Processando
+FAMILY.SQLite=SQLite
+FAMILY.Sybase=Sybase
+FAMILY.Technical=Técnico
+FAMILY.Teradata=Teradata
+FAMILY.Vertica=Vertica

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_ro.properties

@@ -0,0 +1,6 @@
+ComponentsPreferencePage.ButtonLabel0=OK
+ComponentsPreferencePage.rowLimit=Limita inregistrarii
+XsdValidationCacheManager.unableLoadxsd=fisierul xsd cache de validare nu poate fi incarcat
+XsdValidationCacheManager.unableSavexsd=fisierul xsd cache de validare nu poate fi salvat
+FAMILY.Output=Iesire
+FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_sk.properties

@@ -1,18 +0,0 @@
-ComponentsPreferencePage.ButtonLabel0=Ok
-ComponentsPreferencePage.rowLimit=Riadkov\u00FD limit
-ComponentsPreferencePage.WarningTitle=Varovanie
-FAMILY.Access=Pr\u00EDstup
-FAMILY.Connections=Pripojenia
-FAMILY.DB_JDBC=DB JDBC
-FAMILY.Databases=Datab\u00E1za
-FAMILY.ESB=ESB
-FAMILY.eXist=Existuj\u00FAca
-FAMILY.File=S\u00FAbor
-FAMILY.HSQLDb=HSQL.Db
-FAMILY.Input=VSTUP
-FAMILY.JavaDB=JavaDB
-FAMILY.MSSql=MSSQL
-FAMILY.MaxDB=MaxDB
-FAMILY.Output=V\u00DDSTUP
-FAMILY.System=Syst\u00E9m
-FAMILY.XML=XML

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_sr.properties

@@ -0,0 +1,3 @@
+FAMILY.MSSql=MSSql
+FAMILY.MySQL=MySQL
+FAMILY.PostgreSQL=Postgre SQL

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_tr.properties

@@ -0,0 +1,4 @@
+CodeGenInit.createProject={0} projesi olu\u015Ftur
+CodeGenInit.deleteProject={0} projesini sil
+FAMILY.Access=Eri\u015Fim
+FAMILY.Input=Giri\u015F

i18n/plugins/org.talend.designer.codegen.nl/src/main/java/messages_zh_CN.properties

@@ -1,148 +1,83 @@
-JavaRoutineSynchronizer.UnsupportedOperation.Exception1=\u65B9\u6CD5\u672A\u5B9E\u65BD\uFF1Aorg.talend.designer.codegen.JavaRoutineSynchronizer line:49
 CodeGeneratorEmittersPoolFactory.JETEmitters.NoPresent=JETEmitters\u5DE5\u7A0B\u4E0D\u5B58\u5728\uFF0C\u9700\u8981\u91CD\u65B0\u5B8C\u6574\u521D\u59CB\u5316\u3002
-generatedcode.footerprocess.nbcharsgenerated=\u7531 {1} \u751F\u6210\u7684 {0} \u4E2A\u5B57\u7B26
 CodeGeneratorEmittersPoolFactory.Class.NotFound=\u6A21\u677F\u4F9D\u7136\u5B58\u5728\uFF0C\u4F46\u662F\u7C7B{0}
 CodeGeneratorEmittersPoolFactory.PersitentData.Error=\u6301\u4E45\u5316\u6570\u636E\u4E0D\u80FD\u4FDD\u5B58\uFF1A
-generatedcode.copyright.title=\u7248\u6743\u6240\u6709 (c) 2005-2011\uFF0CTalend Inc.
-CodeGeneratorEmittersPoolFactory.initMessage=\u751F\u6210\u5F15\u64CE\u6B63\u5728\u521D\u59CB\u5316...
-generatedcode.copyright.body5=(http://www.gnu.org/licenses/lgpl.html)\u3002
+CodeGeneratorEmittersPoolFactory.initMessage=\u521D\u59CB\u5316\u4EE3\u7801\u751F\u6210\u5F15\u64CE...
 EmfEmittersPersistence.CodeGen.DataMissing=\u4EE3\u7801\u751F\u6210\u6570\u636E\u6D41\u5931\uFF0C\u5F00\u59CB\u91CD\u65B0\u751F\u6210\u4EE3\u7801\u3002
-CodeGenerator.JET.TimeOut=JET \u521D\u59CB\u5316\u8D85\u65F6
+CodeGenerator.JET.TimeOut=JET\u521D\u59CB\u5316\u8D85\u65F6\uFF01
 generatedcode.copyright.body4=\u4F60\u53EF\u4EE5\u5728\u5728GNU LGPL \u8BB8\u53EF\u8BC1\u4E0B\u652F\u914D\u8FD9\u4E9B\u4EE3\u7801
 CodeGenerator.Node.NotFound=\u5728\u5F53\u524D
 generatedcode.copyright.body3=\u4F60\u53EF\u4EE5\u5728www.talend.com\u53D1\u73B0\u66F4\u591A\u5173\u4E8ETalend\u4EA7\u54C1\u4FE1\u606F
-EmittersPoolFactoryImpl.Class.IllegalArg=\u7C7B \' {0}\' \u4E0D\u662F\u4E00\u4E2A\u6709\u6548\u7684\u5206\u7C7B\u5668
+EmittersPoolFactoryImpl.Class.IllegalArg=\u7C7B ' {0}' \u4E0D\u662F\u4E00\u4E2A\u6709\u6548\u7684\u5206\u7C7B\u5668
 generatedcode.copyright.body2=/ \u4F5C\u4E1A\u8BBE\u8BA1 (CodeGenerator version {0}).
-JavaRoutineSynchronizer.UnsupportedOperation.Exception2=\u65B9\u6CD5\u672A\u5B9E\u65BD\uFF1Aorg.talend.designer.codegen.JavaRoutineSynchronizer line:58
 CodeGenerator.getGraphicalNode1=\u8FDB\u7A0B\u5F97\u5230\u56FE\u5F62\u8282\u70B9\uFF08\uFF09
 CodeGenerator.getGraphicalNode2=\u8FDB\u7A0B\u5F97\u5230\u751F\u6210\u8282\u70B9\uFF08\uFF09
-CodeGenerator.newLine=\\n\\n\\n\\n
-JetSkeletonManager.unableLoad=\u65E0\u6CD5\u52A0\u8F7D\u4E3B\u5E72\u66F4\u65B0\u7F13\u5B58\u6587\u4EF6
-JetSkeletonManager.unableSave=\u65E0\u6CD5\u4FDD\u5B58\u4E3B\u5E72\u66F4\u65B0\u7F13\u5B58\u6587\u4EF6
+CodeGenerator.newLine=\n\n\n\n
 JetSkeletonManager.updateProblem=\u5F53\u66F4\u65B0\u6301\u4E45\u6570\u636E\u65F6\u51FA\u73B0\u9519\u8BEF
 CodeGeneratorEmittersPoolFactory.codeThread=\u4EE3\u7801\u751F\u6210\u540E\u53F0\u7EBF\u7A0B
 CodeGeneratorEmittersPoolFactory.componentCompiled=\u7EC4\u4EF6\u7F16\u8BD1{0}\u6BEB\u79D2
-CodeGeneratorEmittersPoolFactory.failCompail=\u7EC4\u4EF6\u7F16\u8BD1\u5931\u8D25: \\r\\n
+CodeGeneratorEmittersPoolFactory.failCompail=\u7EC4\u4EF6\u7F16\u8BD1\u5931\u8D25: \r\n
 CodeGeneratorEmittersPoolFactory.initialException=\u521D\u59CB\u5316\u5F02\u5E38
 CodeGeneratorEmittersPoolFactory.jetEmitterInitialException=\u521D\u59CB\u5316JetEmitter\u51FA\u9519
-CodeGeneratorService.invalidLanguage1=\u65E0\u6548\u7684\u8BED\u8A00\u7C7B\u578B\u3002
-CodeGeneratorService.invalidLanguage2=\u65E0\u6548\u7684\u8BED\u8A00\u7C7B\u578B\u3002
+CodeGeneratorService.invalidLanguage1=\u65E0\u6548\u7684\u8BED\u8A00\u7C7B\u578B.
+CodeGeneratorService.invalidLanguage2=\u65E0\u6548\u7684\u8BED\u8A00\u7C7B\u578B.
 CodeGenInit.addMarkers=\u5DE5\u4F5C\u533A\u4E2D\u6DFB\u52A0\u6807\u8BB0
 CodeGenInit.createProject=\u521B\u5EFA{0} \u5DE5\u7A0B
 CodeGenInit.deleteProject=\u5220\u9664{0} \u5DE5\u7A0B
 CodeGenInit.initTemplate=\u521D\u59CB\u5316\u6A21\u677F
-CodeGenInit.removeLink=\u5220\u9664\u8FDE\u63A5\u8D44\u6E90
+CodeGenInit.removeLink=\u5220\u9664\u94FE\u63A5\u8D44\u6E90
 CodeGenInit.saveWorkspace=\u4FDD\u5B58\u5DE5\u4F5C\u533A
-DocumentRootImpl.mixed=\\ (\u6DF7\u5408:
-NodesSubTree.enableParallel=__ENABLE_PARALLEL__
-PoolTypeImpl.persistentPool=\\ (persistentPool:
-TalendJetEmitter.compileFail=\\ \u7F16\u8BD1\u5931\u8D25\uFF1A{0} : {1}
-TalendJetEmitter.exception=\u5F02\u5E38
-JetFilesProviderManager.unableLoad=\u65E0\u6CD5\u52A0\u8F7D {0}JetFilesProviderManager.unableLoad
+DocumentRootImpl.mixed=\ (\u6DF7\u5408:
 CodeGeneratorEmittersPoolFactory.dialogContent=\u4E3A\u4E86\u907F\u514D\u4EA7\u751F\u95EE\u9898\uFF0C\u8BF7\u6309Ctrl+Shift+F3\u6765\u518D\u6B21\u751F\u6210\uFF01
 CodeGeneratorEmittersPoolFactory.operationCanceled=\u64CD\u4F5C\u5DF2\u53D6\u6D88
-ComponentsFactory.afterSystemComponent=\u5728\u7CFB\u7EDF\u7EC4\u4EF6\u4E4B\u540E
-ComponentsFactory.componentNotFound=\u627E\u4E0D\u5230\u7EC4\u4EF6\u6587\u4EF6\u5939:
+ComponentsFactory.afterSystemComponent=\u5728\u7CFB\u7EDF\u7EC4\u4EF6
+ComponentsFactory.componentNotFound=\u7EC4\u4EF6\u6587\u4EF6\u5939\u6CA1\u53D1\u73B0
 ComponentsFactory.load.components=\u52A0\u8F7D\u7EC4\u4EF6...
-ComponentsFactory.parentNotRecompiled=\u8B66\u544A\uFF1A*.inc.javajet \u7684\u7236\u7EA7\u6CA1\u6709\u91CD\u65B0\u7F16\u8BD1
+ComponentsFactory.parentNotRecompiled=\u8B66\u544A\: \u7236 *.inc.javajet \u6CA1\u6709\u91CD\u65B0\u7F16\u8BD1
 ComponentsLocalProviderService.componentLoadError=\u7EC4\u4EF6\u52A0\u8F7D\u9519\u8BEF
-ComponentsLocalProviderService.talendExchangeError=Talend Exchange \u9519\u8BEF
+ComponentsLocalProviderService.talendExchangeError=Talend Exchange\u9519\u8BEF
 ComponentsPreferencePage.ButtonLabel0=\u786E\u5B9A
-ComponentsPreferencePage.configuration.LINK_STYLE=\u9ED8\u8BA4\u6620\u5C04\u8FDE\u63A5\u663E\u793A\u4E3A:
-ComponentsPreferencePage.rowLimit=\u884C\u9650\u5236
+ComponentsPreferencePage.configuration.LINK_STYLE=\u9ED8\u8BA4\u94FE\u63A5\u663E\u793A\u4E3A\uFF1A
+ComponentsPreferencePage.rowLimit=\u884c\u9650\u5236
 ComponentsPreferencePage.WarningMsg=\u60A8\u9700\u8981\u91CD\u65B0\u542F\u52A8Talend Open Studio\u4EE5\u52A0\u8F7D\u989D\u5916\u7684\u7EC4\u4EF6\u3002
 ComponentsPreferencePage.WarningTitle=\u8B66\u544A
-ComponentsPreferencePage.directoryFieldLabel=\u7528\u6237\u7EC4\u4EF6\u6587\u4EF6\u5939:
+ComponentsPreferencePage.directoryFieldLabel=\u7528\u6237\u7EC4\u4EF6\u6587\u4EF6\u5939\ :
 ComponentsProviderManager.unableLoad=\u65E0\u6CD5\u52A0\u8F7D\u7EC4\u4EF6\u63D0\u4F9B\u7A0B\u5E8F
-ComponenttRunJobPreferencePage.label=\u53CC\u51FB tRunJob \u7EC4\u4EF6\u540E\uFF0C\u4E0D\u663E\u793A\u5BF9\u5E94\u7684\u4F5C\u4E1A
-ComponentJobletPreferencePage.label=\u53CC\u51FB\u5C0F\u4F5C\u4E1A\u7EC4\u4EF6\u540E\uFF0C\u4E0D\u663E\u793A\u76F8\u5E94\u7684\u4F5C\u4E1A\u3002
-ComponenttRunJobPreferencePage.showCorrespondingJob=\u53CC\u51FB tRunJob \u7EC4\u4EF6\u540E\u663E\u793A\u5BF9\u5E94\u4F5C\u4E1A
-XsdValidationCacheManager.unableLoadxsd=\u65E0\u6CD5\u52A0\u8F7D xsd \u9A8C\u8BC1\u7F13\u5B58\u6587\u4EF6
-XsdValidationCacheManager.unableSavexsd=\u65E0\u6CD5\u4FDD\u5B58 xsd \u9A8C\u8BC1\u7F13\u5B58\u6587\u4EF6
+ComponenttRunJobPreferencePage.label=\u53CC\u51FBtRunJob\u7EC4\u4EF6\u540E\u4E0D\u663E\u793A\u5BF9\u5E94\u7684JOB
+ComponentJobletPreferencePage.label=\u53CC\u51FBJoblet\u7EC4\u4EF6\u540E\uFF0C\u4E0D\u663E\u793A\u76F8\u5E94\u7684\u4F5C\u4E1A\u3002
+ComponenttRunJobPreferencePage.showCorrespondingJob=\u53CC\u51FBtRunJob\u7EC4\u4EF6\u540E\u663E\u793A\u5BF9\u5E94JOB
+XsdValidationCacheManager.unableLoadxsd=\u52A0\u8F7Dxsd\u9A8C\u8BC1\u7F13\u5B58\u6587\u4EF6\u5931\u8D25
+XsdValidationCacheManager.unableSavexsd=\u4FDD\u5B58xsd\u9A8C\u8BC1\u7F13\u5B58\u6587\u4EF6\u5931\u8D25
 prefs.configuration.LINK_STYLE.AUTO=\u81EA\u52A8
-prefs.configuration.LINK_STYLE.BEZIER_CURVE=\u66F2\u7EBF
-prefs.configuration.LINK_STYLE.LINE=\u76F4\u7EBF (\u5FEB)
-FAMILY.AS400=AS400
 FAMILY.Access=Access
-FAMILY.Alfresco=Alfresco
 FAMILY.Business=\u4E1A\u52A1
 FAMILY.Business_Intelligence=\u5546\u4E1A\u667A\u80FD
-FAMILY.CentricCRM=CentricCRM
-FAMILY.Charts=\u56FE\u8868
 FAMILY.Connections=\u8FDE\u63A5
-FAMILY.Custom_Code=\u81EA\u5B9A\u4E49\u4EE3\u7801
-FAMILY.DB2=DB2
-FAMILY.DB_Generic=\u6570\u636E\u5E93\u901A\u7528
-FAMILY.DB_JDBC=DB JDBC
-FAMILY.DB_SCD=DB SCD
-FAMILY.Data_Quality=Data Quality
-FAMILY.Databases=\u6570\u636E\u5E93
-FAMILY.ELT=ELT
-FAMILY.ESB=ESB
-FAMILY.EXASolution=EXASolution
-FAMILY.eXist=eXist
-FAMILY.FTP=FTP
-FAMILY.Fields=\u5B57\u6BB5
-FAMILY.File=\u6587\u4EF6
-FAMILY.FireBird=Firebird
-FAMILY.Greenplum=Greenplum
+FAMILY.eXist=\u9000\u51FA
+FAMILY.File=\u6587\u4ef6
+FAMILY.FireBird=\u706B\u9E1F
 FAMILY.HSQLDb=HSQLdb
-FAMILY.Healthcare=Healthcare
-FAMILY.Hive=Hive
 FAMILY.Informix=Informix
 FAMILY.Ingres=Ingres
 FAMILY.Input=\u8F93\u5165
-FAMILY.Interbase=Interbase
 FAMILY.Internet=\u4E92\u8054\u7F51
-FAMILY.Jasper=Jasper
 FAMILY.JavaDB=JavaDB
-FAMILY.JDBC=JDBC
-FAMILY.LDAP=LDAP
-FAMILY.Logs_Errors=\u65E5\u5FD7\u548C\u9519\u8BEF
-FAMILY.MS_SQL_Server=MS SQL Server
 FAMILY.MSSql=MSSQL
-FAMILY.Management=\u7BA1\u7406
 FAMILY.MaxDB=MaxDB
-FAMILY.Microsoft_AX=Microsoft AX
-FAMILY.Microsoft_CRM=Microsoft CRM
-FAMILY.Misc=\u6742\u9879
 FAMILY.MySQL=MySQL
 FAMILY.Netezza=\u7F51\u7EDC\u6635\u79F0
-FAMILY.OLAP_Cube=OLAP \u591A\u7EF4\u6570\u636E\u96C6
 FAMILY.Oracle=Oracle
-FAMILY.Orchestration=Orchestration
-FAMILY.Output=\u8F93\u51FA
-FAMILY.ParAccel=ParAccel
+FAMILY.Output=\u6807\u51c6\u8f93\u51fa
 FAMILY.PostgreSQL=PostgreSQL
-FAMILY.PostgresPlus=PostgresPlus
-FAMILY.Processing=Processing
-FAMILY.SAP=SAP
-FAMILY.Sas=Sas
-FAMILY.SCD=SCD
-FAMILY.SCP=SCP
-FAMILY.SPSS=SPSS
 FAMILY.SQLite=SQLite
-FAMILY.Salesforce=Salesforce
-FAMILY.SugarCRM=SugarCRM
 FAMILY.Sybase=Sybase
 FAMILY.System=\u7CFB\u7EDF
-FAMILY.Technical=\u6280\u672F
 FAMILY.Teradata=Teradata
-FAMILY.Vertica=Vertica
-FAMILY.VtigerCRM=VtigerCRM
 FAMILY.XML=XML
 CodeGeneratorEmittersPoolFactory.updatePaletteForEditors=\u66F4\u65B0\u7F16\u8F91\u5668\u7684\u8C03\u8272\u677F
 ComponentsPreferencePage.componentAssist=\u542F\u7528\u7EC4\u4EF6\u521B\u5EFA\u52A9\u624B
 ComponentsPreferencePage.notValidDirectory=\u60A8\u7684\u9009\u62E9\u5C06\u5BFC\u81F4\u6587\u4EF6\u5939\u5D4C\u5957\uFF0C\u8FD9\u662F\u4E0D\u63A8\u8350\u7684\u3002 \u4F60\u60F3\u7EE7\u7EED\u5417\uFF1F
-ComponentsFactory.loadComponents.missingFolder=\u6587\u4EF6\u5939 \"{0}\" \u7F3A\u5C11\u63D2\u4EF6 \"{1}\".
-ComponentsPreferencePage_SuccessTitle=\u6210\u529F
+ComponentsFactory.loadComponents.missingFolder=\u6587\u4EF6\u5939 "{0}" \u7F3A\u5C11\u63D2\u4EF6 "{1}".
+ComponentsPreferencePage_SuccessTitle=Success
 ComponentsPreferencePage_SuccessMessage1=\u9700\u8981\u91CD\u542FStudio\u6765\u52A0\u8F7D\u7EC4\u4EF6\u3002\u5426\u5219\uFF0C\u4F1A\u5728\u4E0B\u6B21\u542F\u52A8\u65F6\u52A0\u8F7D\u3002
 ComponentsPreferencePage_SuccessMessage2=\u60A8\u60F3\u8981\u9A6C\u4E0A\u91CD\u542F\u5417\uFF1F
 ComponentsPreferencePage.installComponentsFailure=\u5B89\u88C5\u7EC4\u4EF6\u5931\u8D25
-generatedcode.copyright.body1=\u6B64\u6E90\u4EE3\u7801\u5DF2\u7531 {0} \u81EA\u52A8\u751F\u6210
-ComponentsFactory.init.waitForFinish.timeout=\u65E0\u6CD5\u521D\u59CB\u5316 ComponentsFactory\uFF0C\u8BF7\u91CD\u8BD5\u3002
-FAMILY.Data_Privacy=\u6570\u636E\u9690\u79C1
-ComponentsPreferencePage.enableOnLineHelp=\u542F\u7528\u7EC4\u4EF6\u7684\u5728\u7EBF\u5E2E\u52A9
-ComponentsPreferencePage.titleInstallHelp=\u5B89\u88C5\u79BB\u7EBF\u5E2E\u52A9\u529F\u80FD\uFF1F
-ComponentsPreferencePage.msgInstallHelp=\u8FD9\u4F1A\u6253\u5F00\u5176\u4ED6\u8F6F\u4EF6\u5305\u5BF9\u8BDD\u6846\u4EE5\u5B89\u88C5\u79BB\u7EBF\u5E2E\u52A9\u529F\u80FD\uFF0C\u662F\u5426\u7EE7\u7EED\uFF1F
-ComponentsPreferencePage.grpHelp=\u5E2E\u52A9

i18n/plugins/org.talend.designer.components.exchange.nl/META-INF/MANIFEST.MF

@@ -2,5 +2,5 @@ Manifest-Version: 1.0
 Bundle-ManifestVersion: 2
 Bundle-Name: Nl
 Bundle-SymbolicName: org.talend.designer.components.exchange.nl
-Bundle-Version: 7.4.1.qualifier
+Bundle-Version: 7.0.2.qualifier
 Fragment-Host: org.talend.designer.components.exchange

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_de.properties

@@ -1,3 +1,3 @@
-DownloadComponenentsAction.Label=Lade ausgew\u00E4hlte Komponente
+DownloadComponenentsAction.Label=Lade ausgewählte Komponente
 RefreshComponenentsAction.Label=Komponentenliste aktualisieren
 providerName=www.beispiel.de

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_el.properties

@@ -0,0 +1,3 @@
+DownloadComponenentsAction.Label=\u039B\u03AE\u03C8\u03B7 \u0395\u03C0\u03B9\u03BB\u03B5\u03B3\u03BC\u03AD\u03BD\u03C9\u03BD \u03A3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03CE\u03BD \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD
+RefreshComponenentsAction.Label=\u0391\u03BD\u03B1\u03BD\u03AD\u03C9\u03C3\u03B7 \u039B\u03AF\u03C3\u03C4\u03B1\u03C2 \u03A3\u03C5\u03C3\u03C4\u03B1\u03C4\u03B9\u03BA\u03CE\u03BD \u03A3\u03C4\u03BF\u03B9\u03C7\u03B5\u03AF\u03C9\u03BD
+providerName=www.example.org

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_fr.properties

@@ -1,5 +1,5 @@
 Exchange=Exchange
-DownloadComponenentsAction.Label=T\u00E9l\u00E9charger les composants s\u00E9lectionn\u00E9s
-RefreshComponenentsAction.Label=Rafra\u00EEchir la liste des composants
+DownloadComponenentsAction.Label=Télécharger les composants sélectionnés
+RefreshComponenentsAction.Label=Rafraîchir la liste des composants
 providerName=www.example.org
-pluginName=Mod\u00E8le Exchange
+pluginName=Modèle Exchange

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_hr.properties

@@ -0,0 +1 @@
+providerName=www.primjer.com

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_nl.properties

@@ -0,0 +1 @@
+RefreshComponenentsAction.Label=Componentenlijst verversen

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_pt_BR.properties

@@ -0,0 +1,2 @@
+DownloadComponenentsAction.Label=Download dos componentes selecionados
+RefreshComponenentsAction.Label=Refrescar lista de componentes

i18n/plugins/org.talend.designer.components.exchange.nl/plugin_zh_CN.properties

@@ -1,5 +1,4 @@
 Exchange=Exchange
-DownloadComponenentsAction.Label=\u4E0B\u8F7D\u9009\u5B9A\u7684\u7EC4\u4EF6
+DownloadComponenentsAction.Label=\u4E0B\u8F7D\u9009\u62E9\u7684\u7EC4\u4EF6
 RefreshComponenentsAction.Label=\u5237\u65B0\u7EC4\u4EF6\u6E05\u5355
 providerName=www.example.org
-pluginName=Exchange\u6A21\u578B

i18n/plugins/org.talend.designer.components.exchange.nl/pom.xml

@@ -4,7 +4,7 @@
   <parent>
     <groupId>org.talend.studio</groupId>
     <artifactId>tdi-studio-se</artifactId>
-    <version>7.4.1-SNAPSHOT</version>
+    <version>7.0.2-SNAPSHOT</version>
     <relativePath>../../../</relativePath>
   </parent>
   <artifactId>org.talend.designer.components.exchange.nl</artifactId>

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_ar.properties

@@ -0,0 +1,8 @@
+AvailableExtensionsComposite.Version=\u0627\u0644\u0625\u0635\u062F\u0627\u0631
+AvailableExtensionsComposite.Author=\u0645\u0646\u0634\u0626
+MyExtensionsComposite.Version=\u0627\u0644\u0625\u0635\u062F\u0627\u0631
+MyExtensionsComposite.ModifyOperateStatus=\u062A\u0639\u062F\u064A\u0644
+MyExtensionsComposite.DeleteOperateStatus=\u062D\u0630\u0641
+MyExtensionsComposite.Form.Compatibility.Version=\u0627\u0644\u0625\u0635\u062F\u0627\u0631
+ImportExchangeDialog.WARNING=\u062A\u062D\u0630\u064A\u0631
+ImportExchangeDialog.REFRESH_BUTTON=\u062A\u062D\u062F\u064A\u062B

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_de.properties

@@ -1,17 +1,16 @@
-AvailableExtensionsComposite.Author=Autor
 AvailableExtensionsComposite.FilterTitle=Filter
 AvailableExtensionsComposite.ViewDetail.installOperateStatus=Installieren
 AvailableExtensionsComposite.ViewDetail.WriteReview=Bericht schreiben
-AvailableExtensionsComposite.ViewDetail.InsertionReviewFailureTip=Sie sollten es pr\u00FCfen.
+AvailableExtensionsComposite.ViewDetail.InsertionReviewFailureTip=Sie sollten es prüfen.
 DownloadedExtensionsComposite.installedOperateStatus=Installiert
 DownloadedExtensionsComposite.updateOperateStatus=Update
 MyExtensionsComposite.UpdateOperateStatus=Update
 MyExtensionsComposite.ModifyOperateStatus=Modifiziere
-MyExtensionsComposite.DeleteOperateStatus=L\u00F6schen
+MyExtensionsComposite.DeleteOperateStatus=Löschen
 MyExtensionsComposite.Form.Description=Beschreibung
 MyExtensionsComposite.Form.Upload.Browse=Durchsuchen...
-DeleteExtensionJob.DeleteFailure=L\u00F6schung fehlgeschlagen
-DeleteExtensionJob.DeleteFailureTip=Sie sollten es pr\u00FCfen.
+DeleteExtensionJob.DeleteFailure=Löschung fehlgeschlagen
+DeleteExtensionJob.DeleteFailureTip=Sie sollten es prüfen.
 DownloadComponenentsAction.DownloadTaskName=Lade Datei von URL:
 ImportExchangeDialog.WARNING=Warnung
 ImportExchangeDialog.AUTHOR_NAME=Name des Autors

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_el.properties

@@ -0,0 +1,23 @@
+AvailableExtensionsComposite.ExtensionName=\u038C\u03BD\u03BF\u03BC\u03B1 \u0395\u03C0\u03AD\u03BA\u03C4\u03B1\u03C3\u03B7\u03C2
+AvailableExtensionsComposite.Version=\u0388\u03BA\u03B4\u03BF\u03C3\u03B7
+AvailableExtensionsComposite.Author=\u03A3\u03C5\u03B3\u03B3\u03C1\u03B1\u03C6\u03AD\u03B1\u03C2
+AvailableExtensionsComposite.FilterTitle=\u03A6\u03AF\u03BB\u03C4\u03C1\u03BF
+DownloadedExtensionsComposite.ExtensionName=\u038C\u03BD\u03BF\u03BC\u03B1 \u0395\u03C0\u03AD\u03BA\u03C4\u03B1\u03C3\u03B7\u03C2
+DownloadedExtensionsComposite.installedOperateStatus=\u0395\u03B3\u03BA\u03B1\u03C4\u03B5\u03C3\u03C4\u03B7\u03BC\u03AD\u03BD\u03BF
+DownloadedExtensionsComposite.updateOperateStatus=\u0395\u03BD\u03B7\u03BC\u03AD\u03C1\u03C9\u03C3\u03B7
+MyExtensionsComposite.ExtensionName=\u038C\u03BD\u03BF\u03BC\u03B1 \u0395\u03C0\u03AD\u03BA\u03C4\u03B1\u03C3\u03B7\u03C2
+MyExtensionsComposite.Version=\u0388\u03BA\u03B4\u03BF\u03C3\u03B7
+MyExtensionsComposite.UpdateOperateStatus=\u0395\u03BD\u03B7\u03BC\u03AD\u03C1\u03C9\u03C3\u03B7
+MyExtensionsComposite.DeleteOperateStatus=\u0394\u03B9\u03B1\u03B3\u03C1\u03B1\u03C6\u03AE
+MyExtensionsComposite.Form.Compatibility.Version=\u0388\u03BA\u03B4\u03BF\u03C3\u03B7
+MyExtensionsComposite.Form.Description=\u03A0\u03B5\u03C1\u03B9\u03B3\u03C1\u03B1\u03C6\u03AE
+MyExtensionsComposite.Form.Upload.Browse=\u03A0\u03BB\u03BF\u03AE\u03B3\u03B7\u03C3\u03B7...
+DownloadComponenentsAction.DownloadTaskName=\u039B\u03AE\u03C8\u03B7 \u03B1\u03C1\u03C7\u03B5\u03AF\u03BF\u03C5 \u03B1\u03C0\u03CC url:
+ImportExchangeDialog.dialogTitle=\u0395\u03C0\u03B9\u03BB\u03BF\u03B3\u03AE \u03B5\u03BD\u03CC\u03C2 \u03B1\u03BD\u03C4\u03B9\u03BA\u03B5\u03B9\u03BC\u03AD\u03BD\u03BF\u03C5 \u03B1\u03C0\u03CC \u03C4\u03BF Talend Exchange
+ImportExchangeDialog.WARNING=\u03A0\u03C1\u03BF\u03B5\u03B9\u03B4\u03BF\u03C0\u03BF\u03AF\u03B7\u03C3\u03B7
+ImportExchangeDialog.EXTENSION_NAME=\u038C\u03BD\u03BF\u03BC\u03B1 \u0395\u03C0\u03AD\u03BA\u03C4\u03B1\u03C3\u03B7\u03C2
+ImportExchangeDialog.AUTHOR_NAME=\u038C\u03BD\u03BF\u03BC\u03B1 \u03A3\u03C5\u03B3\u03B3\u03C1\u03B1\u03C6\u03AD\u03B1
+ImportExchangeDialog.LATEST_REVISION=\u03A4\u03B5\u03BB\u03B5\u03C5\u03C4\u03B1\u03AF\u03B1 \u0391\u03BD\u03B1\u03B8\u03B5\u03CE\u03C1\u03B7\u03C3\u03B7
+ImportExchangeDialog.EXTENSION_DESCRIPTION=\u03A0\u03B5\u03C1\u03B9\u03B3\u03C1\u03B1\u03C6\u03AE \u0395\u03C0\u03AD\u03BA\u03C4\u03B1\u03C3\u03B7\u03C2
+ImportExchangeDialog.REFRESH_BUTTON=\u0391\u03BD\u03B1\u03BD\u03AD\u03C9\u03C3\u03B7
+ImportExchangeDialog.OPERATION_CANCELLED=\u0397 \u03BB\u03B5\u03B9\u03C4\u03BF\u03C5\u03C1\u03B3\u03AF\u03B1 \u03B1\u03BA\u03C5\u03C1\u03CE\u03B8\u03B7\u03BA\u03B5

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_es.properties

@@ -3,6 +3,6 @@ AvailableExtensionsComposite.ViewDetail.WriteReview=Escribir un comentario
 DownloadedExtensionsComposite.installOperateStatus=Instalar
 MyExtensionsComposite.ModifyOperateStatus=Modificar
 MyExtensionsComposite.DeleteOperateStatus=Borrar
-MyExtensionsComposite.Form.Description=Descripci\u00F3n
+MyExtensionsComposite.Form.Description=Descripción
 ImportExchangeDialog.WARNING=Advertencia
 ImportExchangeDialog.REFRESH_BUTTON=Actualizar

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_fr.properties

@@ -6,12 +6,12 @@ AvailableExtensionsComposite.Author=Auteur
 AvailableExtensionsComposite.FilterTitle=Filtre
 AvailableExtensionsComposite.ViewDetail.installOperateStatus=Installer
 AvailableExtensionsComposite.ViewDetail.WriteReview=Donnez votre avis
-AvailableExtensionsComposite.ViewDetail.InsertionReviewFailureTip=Veuillez v\u00E9rifier.
+AvailableExtensionsComposite.ViewDetail.InsertionReviewFailureTip=Veuillez vérifier.
 DownloadedExtensionsComposite.ExtensionName=Nom de l'extension
-DownloadedExtensionsComposite.DownloadedVersion=Version t\u00E9l\u00E9charg\u00E9e
-DownloadedExtensionsComposite.DownloadDate=Date de t\u00E9l\u00E9chargement
+DownloadedExtensionsComposite.DownloadedVersion=Version téléchargée
+DownloadedExtensionsComposite.DownloadDate=Date de téléchargement
 DownloadedExtensionsComposite.installOperateStatus=Installer
-DownloadedExtensionsComposite.installedOperateStatus=Install\u00E9
+DownloadedExtensionsComposite.installedOperateStatus=Installé
 DownloadedExtensionsComposite.updateOperateStatus=UPDATE
 MyExtensionsComposite.ExtensionName=Nom de l'extension
 MyExtensionsComposite.Version=Version
@@ -24,69 +24,69 @@ MyExtensionsComposite.DeleteOperateStatus=DELETE
 MyExtensionsComposite.Form.Return=Retourner
 MyExtensionsComposite.Form.ExtensionTitle=Titre de l'extension
 MyExtensionsComposite.Form.InitialVersion=Version initiale
-MyExtensionsComposite.Form.Compatibility=Compatibilit\u00E9
+MyExtensionsComposite.Form.Compatibility=Compatibilité
 MyExtensionsComposite.Form.Compatibility.AllVersions=Toutes les versions
 MyExtensionsComposite.Form.Compatibility.Version=Version
 MyExtensionsComposite.Form.Compatibility.AllVersionsExcept=Toutes les versions sauf :
 MyExtensionsComposite.Form.Compatibility.OnlyTheseVersions=Uniquement ces versions :
 MyExtensionsComposite.Form.Description=Description
-MyExtensionsComposite.Form.Visibility=Visibilit\u00E9
+MyExtensionsComposite.Form.Visibility=Visibilité
 MyExtensionsComposite.Form.Visibility.Public=Public (visible par tous)
-MyExtensionsComposite.Form.Visibility.Private=Priv\u00E9 (visible par moi)
+MyExtensionsComposite.Form.Visibility.Private=Privé (visible par moi)
 MyExtensionsComposite.Form.Upload=Charger
-MyExtensionsComposite.Form.Upload.SelectAnItem=S\u00E9lectionnez un \u00E9l\u00E9ment dans le projet ouvert
+MyExtensionsComposite.Form.Upload.SelectAnItem=Sélectionnez un élément dans le projet ouvert
 MyExtensionsComposite.Form.Upload.File=Fichier :
 MyExtensionsComposite.Form.Upload.Browse=Parcourir...
-MyExtensionsComposite.Form.Upload.Browse.SelectFile=S\u00E9lectionnez un fichier de l'extension \u00E0 charger
+MyExtensionsComposite.Form.Upload.Browse.SelectFile=Sélectionnez un fichier de l'extension à charger
 MyExtensionsComposite.Form.DeleteExtensionTile=Supprimer cette extension
 MyExtensionsComposite.Form.DeleteExtensionMessage=Voulez-vous vraiment supprimer cette extension ?
 MyExtensionsComposite.Form.UploadExtension=Charger l'extension
-MyExtensionsComposite.Form.UpdateExtension=Mettre \u00E0 jour l'extension
+MyExtensionsComposite.Form.UpdateExtension=Mettre à jour l'extension
 MyExtensionsComposite.Form.ModifyExtension=Modifier l'extension
 RefreshJob.FindExtensions.Title=Recherche d'extensions disponibles
 RefreshJob.FindExtensions.Message=Recherche d'extensions depuis Exchange...
-ShowInstalledExtensionsJob.ShowInstalledExtensions.Title=Recherche d'extensions install\u00E9es
-ShowInstalledExtensionsJob.ShowInstalledExtensions.Message=Recherche d'extensions install\u00E9es depuis Exchange...
+ShowInstalledExtensionsJob.ShowInstalledExtensions.Title=Recherche d'extensions installées
+ShowInstalledExtensionsJob.ShowInstalledExtensions.Message=Recherche d'extensions installées depuis Exchange...
 DeleteExtensionJob.DeleteExtensionJob.Title=Supprimer une extension...
 DeleteExtensionJob.DeleteExtensionJob.Message=Supprimer une extension...
 DeleteExtensionJob.DeleteFailure=Echec de la connexion.
-DeleteExtensionJob.DeleteFailureTip=Veuillez v\u00E9rifier.
+DeleteExtensionJob.DeleteFailureTip=Veuillez vérifier.
 ModifyExtensionJob.Title=Modifier une extension...
 ModifyExtensionJob.Message=Modifier une extension...
 ModifyExtensionJob.ModifyFailure=Echec de la modification
-ModifyExtensionJob.ModifyFailureTip=V\u00E9rifiez.
+ModifyExtensionJob.ModifyFailureTip=Vérifiez.
 InstalledExtensionJob.Title=Installation de l'extension...
 InsertionExtensionAction.InstalledFailure=Echec de l'installation
-InsertionExtensionAction.InstalledFailureTip=Vous devez le v\u00E9rifier.
-UploadRevisionJob.Title=Chargement de la r\u00E9vision...
-UploadRevisionJob.Message=Charger une r\u00E9vision...
-UploadRevisionAction.InstalledFailure=Echec du chargement de la r\u00E9vision.
-UploadRevisionAction.InstalledFailureTip=Vous devez le v\u00E9rifier.
+InsertionExtensionAction.InstalledFailureTip=Vous devez le vérifier.
+UploadRevisionJob.Title=Chargement de la révision...
+UploadRevisionJob.Message=Charger une révision...
+UploadRevisionAction.InstalledFailure=Echec du chargement de la révision.
+UploadRevisionAction.InstalledFailureTip=Vous devez le vérifier.
 DownloadComponenentsAction.installExchange=Installer les composants Exchange
-DownloadComponenentsAction.DownloadTaskTitle=T\u00E9l\u00E9chargement des fichiers depuis Exchange
-DownloadComponenentsAction.DownloadTaskName=T\u00E9l\u00E9chargement du fichier depuis l'URL :
+DownloadComponenentsAction.DownloadTaskTitle=Téléchargement des fichiers depuis Exchange
+DownloadComponenentsAction.DownloadTaskName=Téléchargement du fichier depuis l'URL :
 DownloadComponenentsAction.ReloadPalette=Recharger la palette...
-DownloadComponenentsAction.DownloadFailure=Echec du t\u00E9l\u00E9chargement
-DownloadComponenentsAction.DownloadFailureTip=Vous devez modifier les param\u00E8tres de t\u00E9l\u00E9chargement.
-ExchangeWebService.insertionExtensionSuccessful=Insertion de l'extension r\u00E9ussie.
-ExchangeWebService.downloadingExtensionSuccessful=T\u00E9l\u00E9chargement de l'extension r\u00E9ussi.
-ExchangeWebService.deleteExtensionSuccessful=Suppression de l'extension r\u00E9ussie.
-ExchangeWebService.updateRevisionSuccessful=Mise \u00E0 jour de la r\u00E9vision r\u00E9ussie.
-ExchangeWebService.insertionRevisionSuccessful=Insertion de la r\u00E9vision r\u00E9ussie.
-ImportExchangeDialog.dialogTitle=S\u00E9lectionnez un \u00E9l\u00E9ment de Talend Exchange
+DownloadComponenentsAction.DownloadFailure=Echec du téléchargement
+DownloadComponenentsAction.DownloadFailureTip=Vous devez modifier les paramètres de téléchargement.
+ExchangeWebService.insertionExtensionSuccessful=Insertion de l'extension réussie.
+ExchangeWebService.downloadingExtensionSuccessful=Téléchargement de l'extension réussi.
+ExchangeWebService.deleteExtensionSuccessful=Suppression de l'extension réussie.
+ExchangeWebService.updateRevisionSuccessful=Mise à jour de la révision réussie.
+ExchangeWebService.insertionRevisionSuccessful=Insertion de la révision réussie.
+ImportExchangeDialog.dialogTitle=Sélectionnez un élément de Talend Exchange
 ImportExchangeDialog.WARNING=Avertissement
-ImportExchangeDialog.NOTSELECTWARNING=S\u00E9lectionnez un \u00E9l\u00E9ment dans la table.
-ImportExchangeDialog.downloadProgressBar=T\u00E9l\u00E9chargement d'\u00E9l\u00E9ment(s), veuillez patienter.
+ImportExchangeDialog.NOTSELECTWARNING=Sélectionnez un élément dans la table.
+ImportExchangeDialog.downloadProgressBar=Téléchargement d'élément(s), veuillez patienter.
 ImportExchangeDialog.EXTENSION_NAME=Nom de l'extension
 ImportExchangeDialog.AUTHOR_NAME=Nom de l'auteur
-ImportExchangeDialog.LATEST_REVISION=Derni\u00E8re r\u00E9vision
+ImportExchangeDialog.LATEST_REVISION=Dernière révision
 ImportExchangeDialog.EXTENSION_DESCRIPTION=Description de l'extension
-ImportExchangeDialog.REFRESH_BUTTON=Rafra\u00EEchir
-ImportExchangeDialog.REFRESHING_PROGRESSBAR=Rafra\u00EEchissement, veuillez patienter..
-ImportExchangeDialog.OPERATION_CANCELLED=L'op\u00E9ration a \u00E9t\u00E9 annul\u00E9e
-Exchange.logon.error=L'utilisateur de l'Exchange n'est pas enregistr\u00E9. Enregistrez-vous via les Pr\u00E9f\u00E9rences.
-DownloadComponenentsAction_restartMessage=Installation du nouveau composant r\u00E9ussie, mais un red\u00E9marrage est requis pour le charger. Red\u00E9marrer ?
-DownloadComponenentsAction_restartTitle=Red\u00E9marrage requis
-DownloadComponenentsAction_failureTitle=\u00C9chec
-DownloadComponenentsAction_failureMessage=\u00C9chec de l'installation du composant {0}, v\u00E9rifiez s'il est valide.
+ImportExchangeDialog.REFRESH_BUTTON=Rafraîchir
+ImportExchangeDialog.REFRESHING_PROGRESSBAR=Rafraîchissement, veuillez patienter..
+ImportExchangeDialog.OPERATION_CANCELLED=L'opération a été annulée
+Exchange.logon.error=L'utilisateur de l'Exchange n'est pas enregistré. Enregistrez-vous via les Préférences.
+DownloadComponenentsAction_restartMessage=Installation du nouveau composant réussie, mais un redémarrage est requis pour le charger. Redémarrer ?
+DownloadComponenentsAction_restartTitle=Redémarrage requis
+DownloadComponenentsAction_failureTitle=Échec
+DownloadComponenentsAction_failureMessage=Échec de l'installation du composant {0}, vérifiez s'il est valide.
 DownloadComponenentsAction.installComponentsTitle=Installer les composants

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_hr.properties

@@ -0,0 +1,9 @@
+AvailableExtensionsComposite.Version=Verzija
+DownloadedExtensionsComposite.updateOperateStatus=A\u017Euriraj
+MyExtensionsComposite.Version=Verzija
+MyExtensionsComposite.UpdateOperateStatus=A\u017Euriraj
+MyExtensionsComposite.DeleteOperateStatus=Obri\u0161i
+MyExtensionsComposite.Form.Compatibility.Version=Verzija
+MyExtensionsComposite.Form.Description=Opis
+ImportExchangeDialog.WARNING=Upozorenje
+ImportExchangeDialog.REFRESH_BUTTON=Osvje\u017Ei

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_ja.properties

@@ -94,7 +94,7 @@ ImportExchangeDialog.REFRESHING_PROGRESSBAR=\u30EA\u30D5\u30EC\u30C3\u30B7\u30E5
 ImportExchangeDialog.OPERATION_CANCELLED=\u64CD\u4F5C\u3092\u30AD\u30E3\u30F3\u30BB\u30EB
 Exchange.logon.error=Exchange\u30E6\u30FC\u30B6\u304C\u767B\u9332\u3055\u308C\u3066\u3044\u307E\u305B\u3093\u3002\u521D\u671F\u8A2D\u5B9A\u3092\u4F7F\u7528\u3057\u3066\u767B\u9332\u3057\u3066\u304F\u3060\u3055\u3044\u3002
 ImportExchangeDialog.download.extensions=\u62E1\u5F35\u6A5F\u80FD\u3092\u30C0\u30A6\u30F3\u30ED\u30FC\u30C9\u4E2D\u3067\u3059\u3001\u66AB\u304F\u304A\u5F85\u3061\u4E0B\u3055\u3044\u3002
-DownloadComponenentsAction_restartMessage=\u65B0\u898F\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u304C\u6210\u529F\u3057\u307E\u3057\u305F\u3002Studio\u306E\u518D\u8D77\u52D5\u304C\u5FC5\u8981\u3067\u3059\u3002\u518D\u8D77\u52D5\u3057\u307E\u3059\u304B?
+DownloadComponenentsAction_restartMessage=\u65B0\u898F\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u306E\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u304C\u6210\u529F\u3057\u307E\u3057\u305F\u3002Studio\u306E\u518D\u8D77\u52D5\u304C\u5FC5\u8981\u3067\u3059\u3002\u518D\u8D77\u52D5\u3057\u307E\u3059\u304B\uFF1F
 DownloadComponenentsAction_restartTitle=\u518D\u8D77\u52D5\u8981
 DownloadComponenentsAction_failureTitle=\u5931\u6557
 DownloadComponenentsAction_failureMessage=\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8{0}\u306E\u30A4\u30F3\u30B9\u30C8\u30FC\u30EB\u304C\u5931\u6557\u3057\u307E\u3057\u305F\u3002\u30B3\u30F3\u30DD\u30FC\u30CD\u30F3\u30C8\u304C\u59A5\u5F53\u304B\u78BA\u8A8D\u3057\u3066\u4E0B\u3055\u3044\u3002

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_kr.properties

@@ -0,0 +1,5 @@
+AvailableExtensionsComposite.Version=\uBC84\uC83C
+MyExtensionsComposite.Version=\uBC84\uC83C
+MyExtensionsComposite.ModifyOperateStatus=\uC218\uC815
+MyExtensionsComposite.DeleteOperateStatus=\uC0AD\uC81C
+MyExtensionsComposite.Form.Compatibility.Version=\uBC84\uC83C

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_nl.properties

@@ -0,0 +1,13 @@
+AvailableExtensionsComposite.Version=Versie
+DownloadedExtensionsComposite.updateOperateStatus=Update
+MyExtensionsComposite.Version=Versie
+MyExtensionsComposite.UpdateOperateStatus=Update
+MyExtensionsComposite.ModifyOperateStatus=Wijzigen
+MyExtensionsComposite.DeleteOperateStatus=Verwijderen
+MyExtensionsComposite.Form.Compatibility.Version=Versie
+MyExtensionsComposite.Form.Upload.Browse=Blader...
+RefreshJob.FindExtensions.Title=Beschikbare extensies zoeken
+RefreshJob.FindExtensions.Message=Extensies zoeken op Exchange...
+UploadRevisionJob.Title=Upload Revisie...
+UploadRevisionJob.Message=Upload Revisie...
+UploadRevisionAction.InstalledFailure=Upload Revisie gefaald.

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_pl.properties

@@ -0,0 +1,12 @@
+AvailableExtensionsComposite.Version=Wersja
+AvailableExtensionsComposite.Author=Autor
+AvailableExtensionsComposite.FilterTitle=filtr
+DownloadedExtensionsComposite.installedOperateStatus=Zainstalowane
+DownloadedExtensionsComposite.updateOperateStatus=aktualizuj
+MyExtensionsComposite.Version=Wersja
+MyExtensionsComposite.UpdateOperateStatus=aktualizuj
+MyExtensionsComposite.ModifyOperateStatus=Zmie\u0144
+MyExtensionsComposite.DeleteOperateStatus=Usu\u0144
+MyExtensionsComposite.Form.Compatibility.Version=Wersja
+ImportExchangeDialog.WARNING=Ostrze\u017Cenie
+ImportExchangeDialog.REFRESH_BUTTON=Od\u015Bwie\u017C

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_pt_BR.properties

@@ -0,0 +1,13 @@
+AvailableExtensionsComposite.Version=Versão
+AvailableExtensionsComposite.FilterTitle=Filtro
+DownloadedExtensionsComposite.installedOperateStatus=Instalado
+MyExtensionsComposite.Version=Versão
+MyExtensionsComposite.ModifyOperateStatus=Modificar
+MyExtensionsComposite.DeleteOperateStatus=Deletar
+MyExtensionsComposite.Form.Compatibility.Version=Versão
+MyExtensionsComposite.Form.Upload.Browse=Browse...
+DownloadComponenentsAction.DownloadTaskName=Downloading do arquivo para url:
+ImportExchangeDialog.WARNING=Advertência
+ImportExchangeDialog.AUTHOR_NAME=Nome do autor
+ImportExchangeDialog.LATEST_REVISION=Última revisão
+ImportExchangeDialog.REFRESH_BUTTON=Atualizar

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_ro.properties

@@ -0,0 +1,5 @@
+AvailableExtensionsComposite.Version=Versiune
+AvailableExtensionsComposite.Author=Autor
+MyExtensionsComposite.Version=Versiune
+MyExtensionsComposite.DeleteOperateStatus=sterge
+MyExtensionsComposite.Form.Compatibility.Version=Versiune

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_sk.properties

@@ -1,18 +0,0 @@
-AvailableExtensionsComposite.Version=Verzia
-AvailableExtensionsComposite.Author=Autor
-AvailableExtensionsComposite.FilterTitle=Filter
-AvailableExtensionsComposite.ViewDetail.installOperateStatus=In\u0161talova\u0165
-DownloadedExtensionsComposite.installOperateStatus=In\u0161talova\u0165
-DownloadedExtensionsComposite.updateOperateStatus=Obnovi\u0165
-MyExtensionsComposite.Version=Verzia
-MyExtensionsComposite.UpdateOperateStatus=Obnovi\u0165
-MyExtensionsComposite.ModifyOperateStatus=Modifikova\u0165
-MyExtensionsComposite.DeleteOperateStatus=Zmaza\u0165
-MyExtensionsComposite.Form.Compatibility=Kompatibilita
-MyExtensionsComposite.Form.Compatibility.Version=Verzia
-MyExtensionsComposite.Form.Description=Popis
-MyExtensionsComposite.Form.Visibility=Vidite\u013Enos\u0165
-MyExtensionsComposite.Form.Upload=Nahra\u0165
-ImportExchangeDialog.WARNING=Varovanie
-ImportExchangeDialog.AUTHOR_NAME=Meno autora
-ImportExchangeDialog.REFRESH_BUTTON=Obnovi\u0165

i18n/plugins/org.talend.designer.components.exchange.nl/src/main/java/messages_sr.properties

@@ -0,0 +1,3 @@
+DownloadedExtensionsComposite.updateOperateStatus=UPDATE
+MyExtensionsComposite.UpdateOperateStatus=UPDATE
+ImportExchangeDialog.REFRESH_BUTTON=Osve\u017Eavanje