I finally realized the missing piece.
We need to clear the state array unconditionally,
as otherwise it won't get cleared. Duh.
Closes#18584
## Validation Steps Performed
* Craft a state.json with a layout
* Launch Terminal while the feature is disabled
* state.json is cleaned up on exit ✅
AdaptDispatch has a TODO item indicating that we should *not* consider a
row wrapped until we write into the cell beyond it. We actually do have
that logic (it even refers to it!), but we still set the wrap flag when
we fill the final column.
We never removed it because it broke the old VT rendering-based ConPTY
implementation.
Now that VtEngine is gone, so can be this code and this strange
workaround for a problem nobody was quite sure what was.
This will fix, hopefully, the last of our exact line length write wrap
issues. tmux users can finally rejoice.
Closes#8976Closes#15602
Went through the settings UI and checked which other setting containers
were missing a preview. Here's the list:
- starting directory
- tab title
- background image
- answerback message
- bell style
Adding them was fairly straightforward. Tried to reuse existing
resources when possible. The general pattern was to add a
"Current<Setting>" or "<Setting>Preview" getter that just created the
human-readable format of the setting.
## Validation Steps Performed
✅ value is shown (including special values!)
✅ each of these work with a screen reader
Closes#18576
The `SGR 1` VT attribute can either be interpreted as a brighter color,
or as a bolder font, depending on the _Intense text style_ setting.
However, the concept of brightness only applies to the eight standard
ANSI colors, so when `SGR 1` is configured as _bright_, it has no effect
on the ITU T.416 colors (RGB and the 256 index colors).
To address that, we now interpret `SGR 1` as a bolder font when applied
to ITU colors, regardless of whether the _Intense text style_ option is
set to bold or not.
Note that this only applies to the Atlas render engine, since the GDI
engine doesn't support bold fonts.
## Validation Steps Performed
I've manually tested `SGR 1` applied to different color formats with the
_Intense text style_ option set to _None_, and confirmed that the text
is now rendered with a bold font for ITU colors, but not for ANSI/AIX
colors.
Closes#18284
This fixes#18877, by iteratively checking to see if a line is wrapped
and moving up or down accordingly.
**Current behavior:** When a user triple-clicks on a line that’s
visually wrapped by the terminal, only the single physical row that was
clicked gets selected.
**Expected behavior:** A triple-click like in xterm, should select the
entire logical line including all of its wrapped segments, from the true
start through its true end, regardless of where the wrap occurred.
**Why it matters:** Logical line selection is what users expect when
they’re trying to grab one command or output block in full. Limiting the
selection to just the current physical row can lead to copy/paste
mistakes and a confusing experience whenever a long line wraps.
## Validation Steps Performed
I ran the existing tests using `Invoke-OpenConsoleTests` and they were
passing and I was also able to test the build on my machine. I added a
test case as well
## PR Checklist
Closes#18877
This fixes two issues in the WPF terminal control:
- The emoji picker and other IME candidate windows didn't show up in the
right place
- Submitting an emoji via the emoji picker would result in two win32
input mode events with a VK of 65535 and the surrogate pair halves.
I am not sure I did the right thing with the thread TSF handle...
According to the documentation, the final character of an SGR mouse
report is meant to be `M` for a button press and `m` for a button
release. However it isn't clear what the final character should be for
motion events, and we were using an `m` if there weren't any buttons
held down at the time, while all other terminals used an `M`, regardless
of the button state.
This PR updates our implementation to match what everyone else is doing,
since our interpretation of the spec was causing problems for some apps.
## Validation Steps Performed
I've manually tested the new behavior in Vttest, and confirmed that our
mouse reports now match Xterm more closely, and I've tested with v0.42.0
of Zellij, which was previous glitching badly in Windows Terminal, but
now works correctly.
I've also updated our unit tests for the SGR mouse mode to reflect the
correct report format.
Closes#18712
When calculating the initial terminal window size, we weren't taking
into account the line height and cell width settings, so the resulting
number of rows and columns didn't match the requested launch size.
Verification:
Manually verified that the window is now correctly sized when using a
custom line height and cell width.
Closes#18582
This PR fixes two cases where image content wasn't correctly erased when
overwritten.
1. When legacy console APIs fill an area of the buffer using a starting
coordinate and a length, the affected area could potentially wrap over
multiple rows, but we were only erasing the overwritten image content on
the first affected row.
2. When copying an area of the buffer with text content over another
area that contained image content, the image in the target area would
sometimes not be erased, because we ignored the `_eraseCells` return
value which indicated that the image slice needed to be removed.
## References and Relevant Issues
The original code was from the Sixel implementation in PR #17421.
## Validation Steps Performed
I've manually verified that these two cases are now working as expected.
## PR Checklist
- [x] Closes#18568
This requires us to delay-sign the assembly with a public key (the snk
file), and then later submit it for strong naming. This is separate from
code signing, and has to take place before it.
The snk file does not contain any private key material.
This cannot merge until we are approved to use this new signing "key
code".
We used to cherry-pick every commit that had even one card in "To Cherry
Pick", even if it was also referenced by a card in "Rejected" or even
"To Consider".
Now we will warn and skip those commits.
I took this opportunity to add a bit of an object model for servicing
cards as well as prettify the output.
That allowed us to add a list of cards that were ignored due to having
no commits, and display little icons for each type of card.
`RenderSettings` already stores `DECSCNM` (reversed screen),
so it only makes sense to also store DECSET 2026 there.
## Validation Steps Performed
* Same as in #18826✅
Wanted to learn how the bot works, so I went ahead cleaned up the bot
rules a bit. List of changes:
- added a description for each rule (and move it to the top of the rule)
- added all the "Area-" labels and sorted
The conhost v2 rewrite from a decade ago introduced a race condition:
Previously, we would acquire and hold the global console lock while
servicing
a console API call. If the call cannot be completed a wait task is
enqueued,
while the lock is held. The v2 rewrite then split the project up into a
"server" and "host" component (which remain to this day). The "host"
would
hold the console lock, while the "server" was responsible for enqueueing
wait
tasks _outside of the console lock_. Without any form of
synchronization,
any operations on the waiter list would then of course introduce a race
condition. In conhost this primarily meant keyboard/mouse input, because
that
runs on the separate Win32 window thread. For Windows Terminal it
primarily
meant the VT input thread.
I do not know why this issue is so extremely noticeable specifically
when we
respond to DSC CPR requests, but I'm also not surprised: I suspect that
the
overall performance issues that conhost had for a long time, meant that
most
things it did were slower than allocating the wait task.
Now that both conhost and Windows Terminal became orders of magnitudes
faster
over the last few years, it probably just so happens that the DSC CPR
request
takes almost exactly as many cycles to complete as allocating the wait
task
does, hence perfectly reproducing the race condition.
There's also a slight chance that this is actually a regression from my
ConPTY
rewrite #17510, but I fail to see what that would be. Regardless of
that,
I'm 100% certain though, that this is a bug that has existed in v0.1.
Closes#18117Closes#18800
## Validation Steps Performed
* See repro in #18800. In other words:
* Continuously emit DSC CPR sequences
* ...read the response from stdin
* ...and print the response to stdout
* Doesn't deadlock randomly anymore ✅
* Feature & Unit tests ✅
The "open JSON" button in the settings UI wasn't working when invoked
via accessibility tools (specifically Narrator in scan mode and Voice
Access). For some reason, in those scenarios, neither the `Tapped` or
`KeyDown` event were hit!
This PR adds the logic to open the json file via the `ItemInvoked` event
instead. The `Tapped` and `KeyDown` handlers were removed to prevent a
redundant `OpenJson` event being raised.
Additionally, `SelectsOnInvoked` was set to `False` on the "open JSON"
nav item. This prevents the selection pill from moving to the nav item,
which feels more correct.
## Validation Steps Performed
The following scenarios are confirmed to open the JSON
✅ Mouse click
✅ Keyboard (Spacebar and Enter)
✅ Voice Access
✅ Narrator in scan mode
For all of these (except Voice Access), I've confirmed that holding the
Alt button while invoking the JSON button opens defaults.json.
Closes#18770Closes#12003
This PR adds a new policy definition to the ADMX templates for settings
the default Terminal application in Windows.
> [!Note]
> This PR does not change any code of Windows, Console Host or Windows
Terminal. It only adds the definition for a new policy to the templates.
I got the registry values form the documentation and by testing the
values.
The policy is only available as user policy because the registry values
have to be in HKCU.
The Policy is implemented as preference (not inside the Policy key) and
therefore keeps it's value on removing (not configured) it. You can see
this in `gpedit.msc` on the policy symbol and the hint in the
description.
Closes#18302
Refs #18303
We can't do the `pos.x != 0` check. Instead, I replaced it with
a CR check to avoid redundant CRs during CRLF translation.
Closes#18735
## Validation Steps Performed
* Run the repro in the linked issue
Use DECSC/DECRC and XTPUSHSGR/XTPOPSGR while redrawing
popups, since they're drawn using the current popup colors.
I wish we could just use the reverse video rendition...
Closes#18742
## Validation Steps Performed
* Run `color 3f` and then press F7
* Works fine in conhost (VtPipeTerm) ✅
* Works as expected (black background) in VS Code ✅
Add additional information to 2 error scenarios when launching a
different profile in the `ConptyConnection.cpp` file.
- Requires Elevation
- File Not Found
Created a profile that required elevation and verified the error
message. Created profile that passed a made up command and verified the
error message.
Closes#7186
When we overwrite the attributes during the fill,
we must retain the lead/trail byte attributes.
Closes#18746
## Validation Steps Performed
* Added a unit test ✅
## Summary of the Pull Request
Support drag-n-drop path translation in the style used by MinGW
programs. In particular for usage with shells like `ash` from busybox
(https://frippery.org/busybox/).
## Detailed Description of the Pull Request / Additional comments
Provides a new option "mingw" for "pathTranslationStyle".
Shown as "MinGW" with translation documented as `(C:\ -> C:/)` in the
UI.
As per the other modes, this translates `\` to `/` but stops there.
There is no prefix/drive translation.
## Validation Steps Performed
Run using `busybox ash` shell. Dragged directories and files from both
local disks and network shares onto terminal. All were appropriately
single quoted and had their backslashes replaced with forward slashes.
They were directly usable by the `ash` shell.
Language files containing the other options have been updated to include
the new one.
## PR Checklist
- [ ] Closes #xxx
- [ ] Tests added/passed
- [x] Documentation updated
- [Docs PR #849](https://github.com/MicrosoftDocs/terminal/pull/849)
- [ ] Schema updated (if necessary)
Co-authored-by: Adam Butcher <adam@jessamine.uk>
This pull request adds support for resetting the various color table
entries and xterm resource values back to their defaults.
Building on the default color table James introduced in #17879, it was
relatively straightforward to add support for resetting specific
entries.
This implementation cleaves tightly to observed behavior in xterm(379)
rather than observed behavior in libvte(0.70.6). They differ in the
following ways:
- xterm rejects any OSC [110..119] with any number of parameters; libvte
accepts it but only resets the first color.
- When passed a list of color indices to reset in 104, xterm resets any
colors up until the first one which fails to parse as an integer and
does _not_ reset the rest; libvte resets all parseable color indices.
I was unable to verify how these reset commands interact with colors set
via `DECAC Assign Color` so I went with the implementation that made the
most sense:
- Resetting the background color with `110` also restores the background
color alias entry to its pre-`DECAC` value; this results in the
perceived background color returning to e.g. index 0 in conhost and the
`background` color in Terminal.
- _ibid._ for the foreground color
Refs #18695
Refs #17879Closes#3719
This required removing connections during the build to `nuget.org` and
`powershellgallery.com`.
The NuGet Tool task was downloading nuget from `nuget.org`
unconditionally.
The `AzureFileCopy` task was downloading `Az.Accounts` from
`powershellgallery.com` unconditionally.
Both of these tasks have better options nowadays.
Tested and passed in OneBranch on 2025-04-01.
This pull request brings us up to fmt 11.1.4 and enables `FMT_PEDANTIC`.
`FMT_PEDANTIC` turns on `/W3`, which is required by our local feudal
lords who will automatically file bugs on us if we don't build with
enough warnings enabled.
PR adds a WinGet configuration file to install the necessary
dependencies in order to build terminal locally. The configuration file
enables developer mode, installs PowerShell 7, Visual Studio 2022 & all
the required workloads from the .vsconfig file (in accordance with
the dependencies listed in the README).
## Validation Steps Performed
Tested the configuration file by spinning up a clean Win11 Pro VM in
azure and then doing the following:
1. Install latest WinGet on the VM using WinGet sandbox script.
Install git and clone the repo
2. Run `winget configure .config/configuration.winget` (this should work
by just double-clicking the file in explorer too)
3. After the configuration is completed, open the solution in the now
installed Visual Studio and build. The build is successful and I could
start terminal with F5
Co-authored-by: Demitrius Nelon <denelon@microsoft.com>
After taking in 1.22, our CodeQL process caught a few locations where we
weren't following the right guidance:
- Performing integer comparisons of different sizes which could lead to
an infinite loop if the larger integer goes out of range of the smaller
integer
- Not checking HResult of a called method
Co-authored-by: aphistra <102989060+aphistra@users.noreply.github.com>
Allow users to preview color schemes by hovering over them with the
mouse pointer in the Command Palette.
- This PR handles issue #18238.
- This extends the previously closed issue #6689, which allowed the `UP`
and `DOWN` arrows to trigger a preview of color schemes in the Command
Palette.
This works by attaching event handlers for `PointerEntered` and
`PointerExited` to `ListViewItem` containers. When the mouse pointer
moves into the item's bounding area, the `PreviewAction` handler is
triggered to showcase the hovered color scheme. Conversely, when the
mouse pointer leaves the item's area, the `PreviewAction` is executed on
the selected item (generally from the `UP` and `DOWN` arrows).
**Important note:**
- This also provides previews for the other features that the
`ActionPreviewHandler` handles, such as the background opacity of the
terminal.
## Validation Steps Performed
- Hover a color scheme, and it becomes the active one.
- Pressing `ESC` at any point to dismiss the command palette, and the
scheme returns to the previous one.
- I did not add any additional test, though all existing ColorScheme
tests passed.
Closes#18238
I found multiple issues while investigating this:
* Render thread shutdown is racy, because it doesn't actually stop the
render thread.
* Lifetime management in `ControlCore` failed to account for the
circular dependency of render thread --> renderer --> render data -->
terminal --> renderer --> render thread. Fixed by reordering the
`ControlCore` members to ensure their correct destruction.
* Ensured that the connection setter calls close on the previous
connection.
(Hopefully) Closes#18598
## Validation Steps Performed
* Can't repro the original failure ❌
* Opening and closing tabs as fast as possible doesn't crash anymore ✅
* Detaching and reattaching a tab producing continuous output ✅
It turns out that we *can* support language overrides--fairly easily, in
fact!--by simply changing the default Language qualifier.
I elected not to change how packaged language override works until we
are certain this works properly everywhere. Consider it a healthy
distrust of the Windows App Platform.
Closes#18419Closes#18336Closes#17619
Since `WaitForDA1` would wait until `_deviceAttributes` is non-zero,
we must ensure it's actually non-zero at the end of this handler,
even if there are no parameters.
## Validation Steps Performed
* Mod the Terminal DA1 to be `\x1b[?6c`. No hang ✅
* Mod the Terminal DA1 to be `\x1b[?61c`. No hang ✅
I've received a dump from an affected user, and it showed that the
layout event in TerminalPage was raised synchronously. This meant that
during page initialization, the handoff listener was started while still
being stuck inside the handoff listener. This resulted in a deadlock.
This PR fixes the issue by not holding the lock across handoff callback
calls.
Closes#18634
## Validation Steps Performed
* Can't repro ❌
This can be considered "part 1" of fixing #18599: It prevents crashes
(due to unhandled exceptions) by ensuring we only create 1 content
dialog across all windows at a time. Sounds bad, but I tried it and it's
not actually _that_ bad in practice (it's still really gross though).
The bad news is that I don't have a "part 2", because I can't figure out
what's going on:
* Create 2 windows
* Open the About dialog in window 1
and right click the text
* Close the About dialog
* Open the About dialog in window 2
and right click the text
* WinUI will simply toss the focus to window 1
It appears as if context menus are permanently associated with the first
window that uses them. It has nothing to do with whether a ContentDialog
instance is reused (I tested that).
## Validation Steps Performed
* Open 2 windows with 2 tabs each
* Attempt to close window 1, dialog appears ✅
* Attempt to close window 2, dialog moves to window 2 ✅
