## Summary of the Pull Request
Fixes a couple of minor issues in the settings schema which can result
in erroneous settings validation failures.
## References and Relevant Issues
None
## Detailed Description of the Pull Request / Additional comments
- `answerbackMessage`
Permit `null` type (corresponds to the default value).
- `compatibility.input.forceVT`
Add missing setting (previously was `experimental.input.forceVT`).
- `rendering.graphicsAPI`
Add missing `automatic` enumeration value.
- Mark several settings as deprecated using the same format and direct
the user to the updated settings to use.
## Validation Steps Performed
Tested updated schema against configuration with above settings present.
## PR Checklist
- [X] Schema updated (if necessary)
---------
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Fixes the terminal profile jsonschema to allow for null in the id. This
is to match the current implementation when disabling a built in default
keybind.
## Summary of the Pull Request
This PR introduces an experimental setting that allows to toggle opacity
changes with scrolling.
## References and Relevant Issues
#3793
## Detailed Description of the Pull Request / Additional comments
By default, holding Ctrl + Shift while scrolling changes the terminal's
opacity. This PR adds an option to disable that behavior.
## Validation Steps Performed
I built the project locally and verified that the new feature works as
intended.
## PR Checklist
- [x] Resolves
https://github.com/microsoft/terminal/issues/3793#issuecomment-3085684640
- [x] Tests ~~added/~~ passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here:
https://github.com/MicrosoftDocs/terminal/pull/873
- [X] Schema updated (if necessary)
This PR adds a new global setting `scrollToZoom` that allows users to
enable font zooming with scrolling. When disabled, **this setting
prevents accidental font size changes** that can occur when users scroll
while holding the Ctrl key.
Note: after disabling this setting, users may still change font size
using `Ctrl+` and `Ctrl-` keyboard shortcuts. Other Ctrl+Scroll
functionality (like transparency adjustments) remains unaffected.
## Validation Steps Performed
- Verified the setting can be toggled in the Settings UI (Interaction
tab)
- Confirmed that when disabled, holding Ctrl and scrolling no longer
changes font size
- Validated that the setting persists across terminal restarts
---
Note: I used the existing `FocusFollowMouse` setting as a reference for
implementing this.
Closes#11710Closes#3793Closes#11906Closes#3990
- Various spelling fixes
- Refresh metadata (including dictionaries)
- Upgrade to v0.0.25
## Validation Steps Performed
- check-spelling has been automatically testing this repository for a
while now on a daily basis to ensure that it works fairly reliably:
https://github.com/check-spelling-sandbox/autotest-check-spelling/actions/workflows/microsoft-terminal-spelling2.yml
Specific in-code fixes:
- winget
- whereas
- tl;dr
- set up
- otherwise,
- more,
- macbook
- its
- invalid
- in order to
- if
- if the
- for this tab,...
- fall back
- course,
- cch
- aspect
- archaeologists
- an
- all at once
- a
- `...`
- ; otherwise,
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
## Summary of the Pull Request
Support drag-n-drop path translation in the style used by MinGW
programs. In particular for usage with shells like `ash` from busybox
(https://frippery.org/busybox/).
## Detailed Description of the Pull Request / Additional comments
Provides a new option "mingw" for "pathTranslationStyle".
Shown as "MinGW" with translation documented as `(C:\ -> C:/)` in the
UI.
As per the other modes, this translates `\` to `/` but stops there.
There is no prefix/drive translation.
## Validation Steps Performed
Run using `busybox ash` shell. Dragged directories and files from both
local disks and network shares onto terminal. All were appropriately
single quoted and had their backslashes replaced with forward slashes.
They were directly usable by the `ash` shell.
Language files containing the other options have been updated to include
the new one.
## PR Checklist
- [ ] Closes #xxx
- [ ] Tests added/passed
- [x] Documentation updated
- [Docs PR #849](https://github.com/MicrosoftDocs/terminal/pull/849)
- [ ] Schema updated (if necessary)
Co-authored-by: Adam Butcher <adam@jessamine.uk>
Before we had a Settings UI, we added support for a setting called
`startOnUserLogin`. It was a boolean, and on startup we would try to
yeet the value of that setting into the Windows API responsible for
registering us as a startup task.
Unfortunately, we failed to take into account a few things.
- Startup tasks can be independently controlled by the user in Windows
Settings or by an enterprise using enterprise policy
- This control is not limited to *disabling* the task; it also supports
enabling it!
Users could enable our startup task outside the settings file and we
would never know it. We would load up, see that `startOnUserLogin` was
`false`, and go disable the task again. 🤦
Conversely, if the user disables our task outside the app _we can never
enable it from inside the app._ If an enterprise has configured it
either direction, we can't change it either.
The best way forward is to remove it from our settings model and only
ever interact with the Windows API.
This pull request replaces `startOnUserLogin` with a rich settings
experience that will reflect the current and final state of the task as
configured through Windows. Terminal will enable it if it can and
display a message if it can't.
My first attempt at this PR (which you can read in the commit history)
made us try harder to sync the state between the settings model and the
OS; we would propagate the disabled state back to the user setting when
the task was disabled in the OS or if we failed to enable it when the
user asked for it. That was fragile and didn't support reporting the
state in the settings UI, and it seems like it would be confusing for a
setting to silently turn itself back off anyway...
Closes#12564
This PR allows users to enable the tab bar in fullscreen mode.
A new setting; "showTabsFullscreen"; has been added which accepts a
boolean value. When `true`, then the tab bar will remain visible when
the terminal app is fullscreen. If the value is `false` (default), then
the tab bar is hidden in fullscreen.
When the tab bar is visible in fullscreen, the min/max/close controls
are hidden to maintain the expected behaviour of a fullscreen app.
## Validation Steps Performed
All unit tests are passing.
Manually verified that when the "launchMode" setting is "fullscreen" and
the "showTabsFullscreen" setting is `true`, the tab bar is visible on
launch.
Manually verified that changing the setting at runtime causes the tab
bar to be shown/hidden immediately (if the terminal is currently
fullscreen).
Manually verified that the new "showTabsFullscreen" setting is honoured
regardless of whether "showTabsInTitlebar" is set to `true` or `false`.
Closes#11130
This pull request introduces a new profile setting,
`compatibility.allowOSC52`, which defaults to `true`. When disabled, it
will not allow applications to write to the clipboard.
Security-minded folks may choose to disable it.
As before, a minor refactor:
* I started off by removing the Monarch/Peasant with the goal of moving
it into and deduplicating its functionality with `WindowEmperor`.
* Since I needed a replacement for the Monarch (= ensures that there's
a single instance), I wrote single-instance code with a NT mutex
and by yeeting data across processes with `WM_COPYDATA`.
* This resulted in severe threading issues, because it now started up
way faster. The more I tried to solve them the deeper I had to dig,
because you can't just put a mutex around `CascadiaSettings`.
I then tried to seeif WinUI can run multiple windows on a single
thread and, as it turns out, it can.
So, I removed the multi- from the window threading.
* At this point I had dig about 1 mile deep and brought no ladder.
So, to finish it up, I had to clean up the entire eventing system
around `WindowEmperor`, cleaned up all the coroutines,
and cleaned up all the callbacks.
Closes#16183Closes#16221Closes#16487Closes#16532Closes#16733Closes#16755Closes#17015Closes#17360Closes#17420Closes#17457Closes#17799Closes#17976Closes#18057Closes#18084Closes#18169Closes#18176Closes#18191
## Validation Steps Performed
* It does not crash ✅
* New/close tab ✅
* New/close window ✅
* Move tabs between windows ✅
* Split tab into new window ✅
* Persist windows on exit / restore startup ✅
## Summary of the Pull Request
Added open current directory action.
## References and Relevant Issues
Need to set this:
https://learn.microsoft.com/en-us/windows/terminal/tutorials/new-tab-same-directory
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
- Ensure shell has been configured
- Run "Open current working directory" action in command palette
- File explorer opens the correct directory
## PR Checklist
- [x] Closes#12859
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
This upgrades to [check-spelling v0.0.24].
A number of GitHub APIs are being turned off shortly, so we need to
upgrade or various uncertain outcomes will occur.
There are some minor bugs that I'm aware of and which I've fixed since
this release (including a couple I discovered while preparing this PR).
There's a new accessibility forbidden pattern:
#### Should be `cannot` (or `can't`)
See https://www.grammarly.com/blog/cannot-or-can-not/
> Don't use `can not` when you mean `cannot`. The only time you're
likely to see `can not` written as separate words is when the word `can`
happens to precede some other phrase that happens to start with `not`.
> `Can't` is a contraction of `cannot`, and it's best suited for
informal writing.
> In formal writing and where contractions are frowned upon, use
`cannot`.
> It is possible to write `can not`, but you generally find it only as
part of some other construction, such as `not only . . . but also.`
- if you encounter such a case, add a pattern for that case to
patterns.txt.
```
\b[Cc]an not\b
```
[check-spelling v0.0.24]: https://github.com/check-spelling/check-spelling/releases/tag/v0.0.24
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
As it turns out, you cannot use `<uap17:UpdateWhileInUse>`
(or any other newer namespace) unless you declare a corresponding
`MaxVersionTested` in your package manifest.
It does not appear that there's a reason for this, it just is.
`MaxVersionTested` is not to be confused with the `maxversiontested`,
which is something else entirely, but I updated it for safe measure.
Since `maxversiontested` is not a "max", but rather a list
of tested versions, it gets appended to the end of the list.
Closes#18119
## Summary of the Pull Request
This extends the copy command to be able to include control sequences,
for use in tools that subsequently know how to parse and display that.
## References and Relevant Issues
https://github.com/microsoft/terminal/issues/15703
## Detailed Description of the Pull Request / Additional comments
At a high level, this:
- Expands the `CopyTextArgs` to have a `withControlSequences` bool.
- Plumbs that bool down through many layers to where we actuall get
data out of the text buffer.
- Modifies the existing `TextBuffer::Serialize` to be more generic
and renames it to `TextBuffer::ChunkedSerialize`.
- Uses the new `ChunkedSerialize` to generate the data for the copy
request.
## Validation Steps Performed
To test this I've manually:
- Generated some styled terminal contents, copied it with the control
sequences, pasted it into a file, `cat`ed the file and seen that it
looks the same.
- Set `"firstWindowPreference": "persistedWindowLayout"` and
validated that the contents of windows are saved and
restored with styling intact.
I also checked that `Invoke-OpenConsoleTests` passed.
## PR Checklist
- [x] Closes#15703
- [ ] Tests added/passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here:
https://github.com/MicrosoftDocs/terminal/pull/756
- [x] Schema updated (if necessary)
`pathTranslationStyle` has four options:
- `none`: Do no translation
- `wsl`: Translate `C:\` to `/mnt/c` and `\\wsl$\Foo\bar` to `/bar`
- `cygwin`: Translate `C:\` to `/cygdrive/c`
- `msys2`: Translate `C:\` to `/c`
It is intended as a broadly-supported replacement for us checking the
source every time the user drops a path.
We no longer need to push the source name all the way down to the
control.
I am hesitant to commit to using other folks' product names in our
settings model,
however, these are almost certainly more recognizable than whatever
other weird
names we could come up with.
The Git Bash fragment extension profile could conceivably use
`pathTranslationStyle`
`msys2` to make sure drag/dropped paths look right.
## Summary of the Pull Request
This PR is to allow users to set a custom icon for entries in the new tab menu for "action" and "profile" type entries.
## References and Relevant Issues
This PR is in response to #18103
## Detailed Description of the Pull Request / Additional comments
It is now possible to specify an optional "icon" setting for any "action" or "profile" type entry in the "newTabMenu" JSON settings. When specified, this icon will be used as the menu icon for that action/profile in the new tab menu. If not specified, the action/profile definition's default icon will be used instead (if present).
The Cascadia settings schema ("doc/cascadia/profiles.schema.json") has been updated to reflect this.
## Validation Steps Performed
Manually tested with multiple combinations of icon settings:
- ActionEntry:
- valid path in action definition and new tab entry (renders new tab entry icon)
- valid path in action definition but no path in new tab entry (renders action definition icon)
- no path in action definition, valid path in new tab entry (renders new tab entry icon)
- invalid path in action definition, valid path in new tab entry (renders new tab entry icon)
- valid path in action definition, invalid path in new tab entry (renders no icon)
- invalid path in both (renders no icon)
- no path in both (renders no icon)
- ProfileEntry:
- valid path in new tab entry (renders new tab entry icon)
- no path in new tab entry (renders profile's default icon)
- invalid path in new tab entry (renders no icon)
## PR Checklist
- [x] Closes#18103
- [x] Tests added/passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: [#808](https://github.com/MicrosoftDocs/terminal/pull/808)
- [x] Schema updated (if necessary)
## Summary of the Pull Request
Adds a global Compatibility page to the settings UI. This page exposes
several existing settings and introduces a few new settings:
- compatibility.allowHeadless
- compatibility.isolatedMode
- compatibility.textMeasurement
- debugFeatures
This also adds a Terminal subpage for profiles in the settings UI. This
page includes:
- suppressApplicationTitle
- compatibility.input.forceVT
- compatibility.allowDECRQCRA
- answerbackMessage
Several smaller changes were accomplished as a part of this PR:
- `experimental.input.forceVT` was renamed to
`compatibility.input.forceVT`
- introduced the `compatibility.allowDECRQCRA` setting
- updated the schema for these new settings and
`compatibility.allowHeadless` (which was missing)
- add `Feature_DebugModeUI` feature flag to control if debug features
should be shown in the SUI
Verified accessible via Accessibility Insights
A part of #10000Closes#16672
Adds the following settings to the Interaction page under a Warnings subsection:
- ConfirmCloseAllTabs
- InputServiceWarning
- WarnAboutLargePaste
- WarnAboutMultiLinePaste
This also changes the JSON keys of those settings to be in the `warning` namespace as a QOL change for JSON users. We still handle the legacy keys, don't worry 😉.
#10000
As we discussed in bug bash.
There's really no downside to us enabling it by default (and leaving
showMarksOnScrollbar: false). It'll mark lines as "prompts" when the
user hits enter. This will have a couple good side effects:
* When folks have right-aligned prompts (like, from oh-my-posh), the
`enter` will terminate where shell integration thinks the command is, so
that the right-prompt doesn't end up in the commandline history
* the scrollToMark actions will Just Work without any other shell
integration
Closes#17632
The answerback feature allows for the user to define a message that the
terminal will transmit to the host whenever an `ENQ` (enquiry) control
character is received.
## Detailed Description of the Pull Request / Additional comments
In Windows Terminal, the message can be configured at the profile level
of the settings file, as a string property named `AnswerbackMessage`.
In ConHost, the message can be configured in the registry, again as a
string value with the name `AnswerbackMessage`.
## Validation Steps Performed
I've confirmed that the control is working as intended in both Windows
Terminal and ConHost using Vttest.
Closes#11946
By rewriting `COOKED_READ_DATA` to use VT for its output we make it
possible to pass this VT output 1:1 straight to the hosting terminal
if we're running under ConPTY. This is also possible with the current
console APIs it uses, but it's somewhat janky. In particular the
usage of `ReadConsoleOutput` to backup/restore the popup contents
could be considered bad faith "rules for thee, not for me",
given that we're telling people to move away from those APIs.
The new implementation contains a bare bones "pager" to fit even
very long prompt contents into the VT viewport.
I fully expect this initial PR to not be entirely bug free, because
writing a proper pager with line wrapping is a little bit complex.
This PR takes some significant shortcuts by leveraging the fact
that the prompt line is always left-to-right and always a series
of fully filled lines followed by one potentially semi-full line.
This allows us to skip using a front/back-buffer for diffing the
contents between two redisplay calls.
Part of #14000
## Validation Steps Performed
* ASCII input
* Chinese input (中文維基百科) ✅
* Surrogate pair input (🙂) ✅
* In cmd.exe
* Create 2 files: "a😊b.txt" and "a😟b.txt"
* Press tab: Autocomplete to "a😊b.txt" ✅
* Navigate the cursor right past the "a"
* Press tab twice: Autocomplete to "a😟b.txt" ✅
* Execute `printf(" "); gets(buffer);` in C (or equivalent)
* Press Tab, A, Ctrl+V, Tab, A ✅
* The prompt is " A^V A" ✅
* Cursor navigation works ✅
* Backspacing/Deleting random parts of it works ✅
* It never deletes the initial 4 spaces ✅
* Backspace deletes preceding glyphs ✅
* Ctrl+Backspace deletes preceding words ✅
* Escape clears input ✅
* Home navigates to start ✅
* Ctrl+Home deletes text between cursor and start ✅
* End navigates to end ✅
* Ctrl+End deletes text between cursor and end ✅
* Left navigates over previous code points ✅
* Ctrl+Left navigates to previous word-starts ✅
* Right and F1 navigate over next code points ✅
* Pressing right at the end of input copies characters
from the previous command ✅
* Ctrl+Right navigates to next word-ends ✅
* Insert toggles overwrite mode ✅
* Delete deletes next code point ✅
* Up and F5 cycle through history ✅
* Doesn't crash with no history ✅
* Stops at first entry ✅
* Down cycles through history ✅
* Doesn't crash with no history ✅
* Stops at last entry ✅
* PageUp retrieves the oldest command ✅
* PageDown retrieves the newest command ✅
* F2 starts "copy to char" prompt ✅
* Escape dismisses prompt ✅
* Typing a character copies text from the previous command up
until that character into the current buffer (acts identical
to F3, but with automatic character search) ✅
* F3 copies the previous command into the current buffer,
starting at the current cursor position,
for as many characters as possible ✅
* Doesn't erase trailing text if the current buffer
is longer than the previous command ✅
* Puts the cursor at the end of the copied text ✅
* F4 starts "copy from char" prompt ✅
* Escape dismisses prompt ✅
* Erases text between the current cursor position and the
first instance of a given char (but not including it) ✅
* F6 inserts Ctrl+Z ✅
* F7 without modifiers starts "command list" prompt ✅
* Escape dismisses prompt ✅
* Entries wider than the window width are truncated ✅
* Height expands up to 20 rows with longer histories ✅
* F9 starts "command number" prompt ✅
* Left/Right replace the buffer with the given command ✅
* And put cursor at the end of the buffer ✅
* Up/Down navigate selection through history ✅
* Stops at start/end with <10 entries ✅
* Stops at start/end with >20 entries ✅
* Scrolls through the entries if there are too many ✅
* Shift+Up/Down moves history items around ✅
* Home navigates to first entry ✅
* End navigates to last entry ✅
* PageUp navigates by $height items at a time or to first ✅
* PageDown navigates by $height items at a time or to last ✅
* Alt+F7 clears command history ✅
* F8 cycles through commands that start with the same text as
the current buffer up until the current cursor position ✅
* Doesn't crash with no history ✅
* F9 starts "command number" prompt ✅
* Escape dismisses prompt ✅
* Ignores non-ASCII-decimal characters ✅
* Allows entering between 1 and 5 digits ✅
* Pressing Enter fetches the given command from the history ✅
* Alt+F10 clears doskey aliases ✅
* In cmd.exe, with an empty prompt in an empty directory:
Pressing tab produces an audible bing and prints no text ✅
* When Narrator is enabled, in cmd.exe:
* Typing individual characters announces only
exactly each character that is being typed ✅
* Backspacing at the end of a prompt announces
only exactly each deleted character ✅
- Remove the `deprecated` flag for the `keybindings` array now that we
have re-added that
- Update `userDefaults` to use the correct ID for the `Copy` command
This specs out a lot of plans for snippets. We've already got these in
the sxnui as "tasks", but we can do so very much more.
This spec is a few years old now, but it's time for it to get promoted
out of my draft branch.
References:
* #1595
* #7039
* #3121
* #10436
* #12927
* #12857
* #5790
* #15845
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Quick Fix will be a new UI surface that allows the user to interact with
the terminal and leverage the context of a specific command being
executed. This new UI surface will be a home for features like WinGet
Command Not Found.
#16599
As outlined in #16816, refactor `ActionMap` to use the new action IDs
added in #16904
## Validation steps performed
- [x] Legacy style commands are parsed correctly (and rewritten to the
new format)
- [x] Actions are still layered correctly and their IDs can be used to
'overwrite' actions in earlier layers
- [x] Keybindings that refer to an ID defined in another layer work
correctly
- [x] User-defined actions without an ID have one generated for them
(and their settings file is edited with it)
- [x] Schema updated
Refs #16816Closes#17133
Noticed all these while prepping for Build:
* Promotes the stabilized features out of `experimental.`
* fixes a bug where a nested command with a `name` would match to a
`renameWindow` action, instead of a command.
* Adds the tab theme icon style
* fixes a bug where `ScrollToMarkAction` wasn't in the list of possible
args, so they would incorrectly get flagged as `moveTab`
* outright adds `experimental.rightClickContextMenu` which was missing
(?)
Due to #16821 everything about #16104 broke. This PR rights the wrongs
by rewriting all the `Font`-based code to not use `Font` at all.
Instead we split the font spec once into font families, do a lot of
complex logic to split font axes/features into used and unused ones
and construct all the UI elements. So. much. boilerplate. code.
Closes#16943
## Validation Steps Performed
There are more edge cases than I can list here... Some ideas:
* Edit the settings.json with invalid axis/feature keys ✅
* ...out of range values ✅
* Settings UI reloads when the settings.json changes ✅
* Adding axes/features works ✅
* Removing axes/features works ✅
* Resetting axes/features works ✅
* Axes/features apply in the renderer when saving ✅
Next in the popular series of minor refactorings:
Out with the old, in with the new!
This PR removes all of the existing TSF code, both for conhost and
Windows Terminal. conhost's TSF implementation was awful:
It allocated an entire text buffer _per line_ of input.
Additionally, its implementation spanned a whopping 40 files and
almost 5000 lines of code. Windows Terminal's implementation was
absolutely fine in comparison, but it was user unfriendly due to
two reasons: Its usage of the `CoreTextServices` WinRT API indirectly
meant that it used a non-transitory TSF document, which is not the
right choice for a terminal. A `TF_SS_TRANSITORY` document (-context)
indicates to TSF that it cannot undo a previously completed composition
which is exactly what we need: Once composition has completed we send
the result to the shell and we cannot undo this later on.
The WinRT API does not allow us to use `TF_SS_TRANSITORY` and so it's
unsuitable for our application. Additionally, the implementation used
XAML to render the composition instead of being part of our text
renderer, which resulted in the text looking weird and hard to read.
The new implementation spans just 8 files and is ~1000 lines which
should make it significantly easier to maintain. The architecture is
not particularly great, but it's certainly better than what we had.
The implementation is almost entirely identical between both conhost
and Windows Terminal and thus they both also behave identical.
It fixes an uncountable number of subtle bugs in the conhost TSF
implementation, as it failed to check for status codes after calls.
It also adds several new features, like support for wavy underlines
(as used by the Japanese IME), dashed underlines (the default for
various languages now, like Vietnamese), colored underlines,
colored foreground/background controlled by the IME, and more!
I have tried to replicate the following issues and have a high
confidence that they're resolved now:
Closes#1304Closes#3730Closes#4052Closes#5007 (as it is not applicable anymore)
Closes#5110Closes#6186Closes#6192Closes#13805Closes#14349Closes#14407Closes#16180
For the following issues I'm not entirely sure if it'll fix it,
but I suspect it's somewhat likely:
#13681#16305#16817
Lastly, there's one remaining bug that I don't know how to resolve.
However, that issue also plagues conhost and Windows Terminal
right now, so it's at least not a regression:
* Press Win+. (emoji picker) and close it
* Move the window around
* Press Win+.
This will open the emoji picker at the old window location.
It also occurs when the cursor moves within the window.
While this is super annoying, I could not find a way to fix it.
## Validation Steps Performed
* See the above closed issues
* Use Vietnamese Telex and type "xin choaf"
Results in "xin chào" ✅
* Use the MS Japanese IME and press Alt+`
Toggles between the last 2 modes ✅
* Use the MS Japanese IME, type "kyouhaishaheiku", and press Space
* The text is converted, underlined and the first part is
doubly underlined ✅
* Left/Right moves between the 3 segments ✅
* Home/End moves between start/end ✅
* Esc puts a wavy line under the current segment ✅
* Use the Korean IME, type "gksgks"
This results in "한한" ✅
* Use the Korean IME, type "gks", and press Right Ctrl
Opens a popup which allows you to navigate with Arrow/Tab keys ✅
This removes `VtApiRoutines` and the VT passthrough mode.
Why? While VT passthrough mode has a clear advantage (doesn't corrupt
VT sequences) it fails to address other pain points (performance,
out-of-sync issues after resize, etc.). Alternative options are
available which have less restrictions.
Why now? It's spring! Spring cleanup!
This implements `SetForceFullRepaintRendering` and adds a new
`SetGraphicsAPI` function. The former toggles `Present1` on and off
and the latter allows users to explicitly request Direct2D/3D.
On top of these changes I did a minor cleanup of the interface,
because now that DxRenderer is gone we don't need all that anymore.
Closes#14254Closes#16747
## Validation Steps Performed
* Toggling Direct2D on/off changes colored ligature support ✅
* Toggling Present1 on/off can be observed in a debugger ✅
* Toggling WARP on/off changes GPU metrics ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
As we start to work on implementing Action IDs, the spec written a few
years ago needs some updates. This PR makes those updates for the
current implementation plan.
References #6899
With AtlasEngine being fairly stable at this point and being enabled
by default in the 1.19 branch, this changeset removes DxEngine.
## Validation Steps Performed
* WT builds and runs ✅
* WpfTestNetCore ✅
* Saving the config removes the `useAtlasEngine` key ✅
This is a specification for a way to customize console allocations.
The new manifest type `consoleAllocationPolicy` and the new
`AllocConsoleWithOptions` API were already added to the console
client library internally.
Closes#7335
Upgrades check-spelling to [v0.0.22](https://github.com/check-spelling/check-spelling/releases/tag/v0.0.22)
* refreshes workflow
* enables dependabot PRs to trigger CI (so that in the future you'll be
able to see breaking changes to the dictionary paths)
* refreshes metadata
* built-in handling of `\n`/`\r`/`\t` is removed -- This means that the
`patterns/0_*.txt` files can be removed.
* this specific PR includes some shim content, in
`allow/check-spelling-0.0.21.txt` -- once it this PR merges, it can be
removed on a branch and the next CI will clean out items from
`expect.txt` relating to the `\r` stuff and suggest replacement content.
* talking to the bot is enabled for forks (but not the master
repository)
* SARIF reporting is enabled for PRs w/in a single repository (not
across forks)
* In job reports, there's a summary table (space permitting) linking to
instances (this is a poor man's SARIF report)
* When a pattern splits a thing that results in check-spelling finding
an unrecognized token, that's reported with a distinct category
* When there are items in expect that not longer match anything but more
specific items do (e.g. `microsoft` vs. `Microsoft`), there's now a
specific category with help/advice
* Fancier excludes suggestions (excluding directories, file types, ...)
* Refreshed dictionaries
* The comment now links to the job summary (which includes SARIF link if
available, the details view, and a generated commit that people can use
if they're ok w/ the expect changes and don't want to run perl)
Validation
----------
1. the branch was developed in
https://github.com/check-spelling-sandbox/terminal/actions?query=branch%3Acheck-spelling-0.0.22
2. ensuring compatibility with 0.0.21 was done in
https://github.com/check-spelling-sandbox/terminal/pull/3
3. this version has been in development for a year and has quite a few
improvements, we've been actively dogfooding it throughout this period 😄
Additional Fixes
----------------
spelling: the
spelling: shouldn't
spelling: no
spelling: macos
spelling: github
spelling: fine-grained
spelling: coarse-grained
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
## Summary of the Pull Request
Added some Punctuation Marks as Required.
## References and Relevant Issues
None.
## Detailed Description of the Pull Request / Additional comments
There were some missing Punctuation Marks(Ex: Colon(:) and Full
Stop(.)), so I have added them.
## Validation Steps Performed
During `!measureOnly` the old code would increment `distance` twice.
Now it doesn't. :)
Closes#16356
## Validation Steps Performed
See updated test instructions in `doc/COOKED_READ_DATA.md`
I randomly came across this class, that I didn't even remember we had.
We don't use this class at the moment and won't need it any time soon.
Its current implementation is also fairly questionable. While
`til::u16state` isn't "perfect", it's vastly better than this.
